Logo Leibniz Universität Hannover
Logo: Institute of Continuum Mechanics/Leibniz Universität Hannover
Logo Leibniz Universität Hannover
Logo: Institute of Continuum Mechanics/Leibniz Universität Hannover
  • Zielgruppen
  • Suche
 

Publications of Prof. Dr.-Ing. habil. Dr. h.c. mult. Dr.-Ing. E.h. Peter Wriggers

Book

2017

H. Wessels, M. Gieseke, C. Weißenfels, S. Kaierle, P. Wriggers, L. Overmeyer (2017): Simulation von Selective Laser Melting Prozessen, In: R. Lachmayer, R. B. Lippert (Ed.) Additive Manufacturing Quantifiziert 145-162, Springer Vieweg, Berlin
DOI: 10.1007/978-3-662-54113-5
ISBN: 978-3-662-54112-8

M. Marino, G. Pontrelli, G. Vairo, P. Wriggers (2017): Coupling microscale transport and tissue mechanics: modelling strategies for arterial multiphysics, In: S. Becker (Ed.), Microscale Transport Modelling In Biological Processes
DOI: 10.1016/B978-0-12-804595-4.00004-3

2016

J. Korelc and P. Wriggers (2016): Automation of Finite Element Methods, Springer
ISBN: 978-3-319-39005-5

2015

M. Weidling, S. Besdo, T. Schilling, M. Bauer, T. Hassel, F.-W. Bach, H. J. Maier, J. Lamon, A. Haverich, P. Wriggers (2015): Development of Magnesium Alloy Scaffolds to Support Biological Myocardial Grafts - A Finite Element Investigation, in "Biomedical Technology" eds. T. Lenarz and P. Wriggers Lecture Notes in Applied and Computational Mechanics, Vol. 74, Springer Verlag, pp. 81-100

2014

P. Wriggers, M. Kultsova, A. Kapysh, A. Kultsov, I. Zhukova (2014): Intelligent Decision Support System for River Floodplain Management, in Knowledge Based Software Engineering, Eds. A. Kravets, M. Shcherbakov, M. Kultsova and T. Iijima,, Communications in Computer and Information Science, Springer pp. 195-213, DOI: 10.1007/978-3-319-11854-3_18

2011

C. Wellmann and P. Wriggers (2011): Homogenization of Granular Material modeled by a 3D DEM, Particle-Based Methods: Fundamentals and Applications, eds. E. Onate and D. R. J. Owen, pp. 211-231

D. Besdo, B. Heimann, M. Klüppel, M. Kröger, U. Nackenhorst and P. Wriggers (2011): Elastomere Friction, LNACM Vol. 51, Springer, Berlin

E. Lehmann, S. Schmaltz, D. Faßmann, S. Germain, C. Weber, S. Löhnert, M. Schaper, Fr.-W. Bach, P. Steinmann, K. Willner, P. Wriggers (2011): Identifikation eines Materialmodells für den DC04 basierend auf der numerischen Modellierung der polykristallinen Mikrostruktur und experimentellen Daten, In: M. Merklein, Fr.-W. Bach, A. E. Tekkaya (Hrg.) 1. Workshop Blechmassivumformung, S. 13-32, Meisenbach Bamberg. ISBN 978-3-87525-321-4.

E. Stephan and P. Wriggers (2011): Modeling, Simulation and Software Concepts for Scientific-Technological Problems, LNACM Vol. 57, Springer, Berlin

G. Zavarise and P. Wriggers (eds.) (2011): Trends in Computational Contact Mechanics, LNACM Vol. 58, Springer, Berlin

P. Pimenta and P. Wriggers (eds.) (2011): New Trends in Thin Structures: Formulation, Optimization and Coupled Problems, CISM Course and Lecture Notes, vol 519, Springer, Wien

2010

P. Wriggers (2010): Contact between Beams and Shells in "New Trends in Thin Structures: Formulation, Optimization and Coupled Problems", eds.: P. Pimenta and P. Wriggers, CISM Course and Lecture Notes, vol 519, pp. 155-174, Springer, Wien

2009

P. Wriggers, C. Carstensen (Eds.) (2009): Mixed Finite Element Technologies. CISM Courses and Lectures, vol. 509., Springer, Wien.

2008

P. Wriggers (2008): Nonlinear Finite Element Methods., Springer, Berlin.

P. Wriggers, T. A. Laursen (Eds.) (2008): Computational Contact Mechanics. CISM Courses and Lectures, vol. 498., Springer, Wien.

2007

P. Wriggers, U. Nackenhorst (Eds.) (2007): IUTAM Symposium on Computational Methods in Contact Mechanics. Proceedings of the IUTAM Symposium, Hannover, Nov. 5-8 2006., Springer, Dordrecht.

2006

G. Zavarise, P. Wriggers, U. Nackenhorst (2006): A Guide for Engineers to Computational Contact Mechanics. The TCN Series on Simulation Based Engineering and Sciences, Vol. 1., Consorzio TCN, Trento, Italy.

P. Wriggers (2006): Computational Contact Mechanics. Second Edition., Springer, Berlin, Heidelberg.

P. Wriggers, U. Nackenhorst (Eds.) (2006): Analysis and Simulation of Contact Problems. Lecture Notes in Applied and Computational Mechanics, vol. 27., Springer, Heidelberg.

2005

P. Wriggers, U. Nackenhorst, S. Beuermann, H. Spiess, S. Loehnert (2005): Technische Mechanik kompakt: Starrkörperstatik, Elastostatik, Kinetik., Teubner.

T. I. Zohdi, P. Wriggers (2005): Introduction to Computational Micromechanics. Lecture Notes in Applied and Computational Mechanics, vol. 20., Springer, Berlin.

2003

E. Ramm, E. Rank, R. Rannacher, K. Schweizerhof, E. Stein, W. Wendland, G. Wittum, P. Wriggers, W. Wunderlich (2003): Error-controlled Adaptive Finite Elements in Solid Mechanics., Wiley, Chichester.

2002

P. Wriggers (2002): Computational Contact Mechanics., Wiley, Chichester.

2001

P. Wriggers (2001): Nichtlineare Finite-Element-Methoden., Springer, Berlin.

1999

D. Gross, W. Hauger, W. Schnell, P. Wriggers (1999): Technische Mechanik 4: Hydromechanik, Elemente der Höheren Mechanik, Numerische Methoden., Springer, Berlin.

D. Gross, W. Schnell, W. Ehlers, P. Wriggers (1999): Formeln und Aufgaben zur Technischen Mechanik 3, Kinetik, Hydrodynamik., Springer, Berlin.

P. Wriggers, P. Panagiotopoulos (Eds.) (1999): New Developments in Contact Problems. CISM Courses and Lectures NO. 384., Springer, Wien, New York.

1998

D. Gross, W. Schnell, W. Ehlers, P. Wriggers (1998): Formeln und Aufgaben zur Technischen Mechanik 2, Elastostatik, Hydrostatik., Springer, Berlin.

D. Gross, W. Schnell, W. Ehlers, P. Wriggers (1998): Formeln und Aufgaben zur Technischen Mechanik 1, Statik., Springer, Berlin.

P. Wriggers, U. Meisner, E. Stein, W. Wunderlich (1998): Finite Elemente in der Baupraxis, FEM 98., Ernst & Sohn.

1992

J. Eibl, O. Obrecht, P. Wriggers (1992): Finite Elemente in der Baupraxis.

1991

P. Wriggers, W. Wagner (Eds.) (1991): Nonlinear Computational Mechanics: State of the Art., Springer.

Article in Journal

2017

M. Marino, G. Pontrelli, G. Vairo, P. Wriggers (2017): A chemo-mechano-biological formulation for the effects of biochemical alterations on arterial mechanics: the role of molecular transport and multiscale tissue remodelling, Journal of the Royal Society Interface 14:20170615
DOI: 10.1098/rsif.2017.0615

M. Marino, P. Wriggers (2017): Finite strain response of crimped fibers under uniaxial traction: an analytical approach applied to collagen, Journal of the Mechanics and Physics of Solids 98:429-453
DOI: 10.1016/j.jmps.2016.05.010

P. Wagner, P. Wriggers, L. Veltmaat, H. Clasen, C. Prange, B. Wies (2017): Numerical multiscale modelling and experimental validation of low speed rubber friction on rough road surfaces including hysteretic and adhesive effects, Tribology International, Volume 111, pp. 243–253
DOI: 10.1016/j.triboint.2017.03.015

P. Wriggers, B. Hudobivnik (2017): A low order virtual element formulation for finite elasto-plastic deformations, Computer Methods in Applied Mechanics and Engineering
DOI: 10.1016/j.cma.2017.08.053

P. Wriggers, B.D. Reddy, W. T. Rust, B. Hudobivnik (2017): Efficient virtual element formulations for compressible and incompressible finite deformations, Computational Mechanics (2017) 60:253–268
DOI: 10.1007/s00466-017-1405-4

S. Reschka, L. Munk, P. Wriggers, H. J. Maier (2017): An EBSD Evaluation of the Microstructure of Crept Nimonic 101 for the Validation of a Polycrystal–Plasticity Model, Journal of Materials Engineering and Performance
DOI: https://doi.org/10.1007/s11665-017-3046-3

Steffen Beese, Stefan Loehnert, Peter Wriggers (2017): 3D ductile crack propagation within a polycrystalline microstructure using XFEM , Computational Mechanics
DOI: 10.1007/s00466-017-1427-y

2016

A. B. Harish, P. Wriggers, J. Jungk, N. Hojdis and C. Recker (2016): Mesoscale constitutive modeling of non-crystallizing filled elastomers, Computational Mechanics, Vol. 57(4), pp. 653-677  | file |
DOI: 10.1007/s00466-015-1251-1

D. Gottschalk, A. McBride, B.D. Reddy, A. Javil, P. Wriggers and C.B. Hirschberger (2016): Computational and theoretical aspects of a grain-boundary model that accounts for grain misorientation and grain-boundary orientation, Computational Materials Science, vol. 111, pp. 443-459

J. Costa, P. Pimenta and P. Wriggers (2016): Meshless analysis of shear deformable shells: boundary and interface constraints, Computational Mechanics, vol. 57, pp. 679-700

J. Schröder, N. Viebahn, D. Balzani and P. Wriggers (2016): A novel mixed finite element for finite anisotropic elasticity; the SKA-element Simplified Kinematics for Anisotropy, Computer Methods in Applied Mechanics and Engineering, vol. 310, pp. 475-494

M. Paggi and P. Wriggers (2016): Node-to-segment and node-to-surface interface finite elements for fracture mechanics, Computer Methods in Applied Mechanics and Engineering, vol. 300, pp. 540-560

Meisam Soleimani, Peter Wriggers, Henryke Rath, Meike Stiesch (2016): Numerical simulation and experimental validation of biofilm in a multi-physics framework using an SPH based method
DOI: 10.1007/s00466-016-1308-9

P. S. B. Nigro and M. Anndif and Y. Teixeira and P. Pimenta and P. Wriggers (2016): An adaptive model order reduction by proper snapshot selection for nonlinear dynamical problems, Computational Mechanics, vol. 57, pp. 537-554

P. Wriggers (2016): Modelle in der Strukturmechanik, Bauingenieur, vol. 91, pp. 330-334

P. Wriggers, W.T. Rust, B.D. Reddy (2016): A virtual element method for contact , Computational Mechanics (2016) 58: 1039-1050
DOI: 10.1007/s00466-016-1331-x

S. Yazdani, W.J.H. Rust, P. Wriggers (2016): An XFEM approach for modelling delamination in composite laminates, Composite Structures
DOI: 10.1016/j.compstruct.2015.09.035

S. Yazdani, W.J.H. Rust, P. Wriggers (2016): Delamination growth in composite laminates of variable stiffness, International Journal for Numerical Methods in Engineering
DOI: 10.1002/nme.5264

Wriggers, P., Schröder, J. and Auricchio, F. (2016): Finite element formulations for large strain anisotropic materials, International Journal on Advanced Modelling and Simulation in Engineering Sciences, (accepted)

2015

C. Weißenfels and P. Wriggers (2015): Methods to project plasticity models onto the contact surface applied to soil structure interactions, Computers and Geotechnics 65 (2015) 187–198  | file |

L. Wolters, S. Besdo, N. Angrisani, P. Wriggers, B. Hering, J. M. Seitz, J. Reifenrath (2015): Degradation behaviour of LAE442-based plate–screw-systems in an in vitro bone model, Materials Science and Engineering, Vol. 49, pp. 305-315

M. Marino, G. Vairo, P. Wriggers (2015): Multiscale hierarchical mechanics in soft tissues, Proceedings in Applied Mathematics and Mechanics 15:35-38
DOI: 10.1002/pamm.201510010

P. Wagner, P. Wriggers, C. Klapproth, C. Prange, B. Wies (2015): Multiscale FEM approach for hysteresis friction of rubber on rough surfaces, Computer Methods in Applied Mechanics and Engineering, Volume 296, pp. 150-168, DOI: 10.1016/j.cma.2015.08.003

S. Beese, S. Loehnert, P. Wriggers (2015): 3D Ductile crack propagation with the XFEM, Proceedings in Applied Mathematics and Mechanics, vol 15, pp. 747-748
DOI: 10.1002/pamm.201510354

2014

G.A. Drosopoulos, P. Wriggers, G.E. Stavroulakis (2014): A multi-scale computational method including contact for the analysis of damage in composite materials, Computational Material Science, 95, pp.522-535, DOI: 10.1016/j.commatsci.2014.08.004

J. Ma, J. Zhang, LJ. Li, P. Wriggers, S. Sahraee (2014): Random homogenization analysis for heterogeneous materials with full randomness and correlation in microstructure based on finite element method and Monte-carlo method, Computational Mechanics, 54 pp. 1395-1414, DOI: 10.1007/s00466-014-1065-6

J. Ma, S.Q. Zhang, P. Wriggers, W. Gao, L. de Lorenzis (2014): Stochastic homogenized effective properties of three-dimensional composite material with full randomness and correlation in the microstructure, Computers & Structures, 144 pp. 62-74, DOI: 10.1016/j.compstruc.2014.06.003

L. De Lorenzis, P. Wriggers, TJR Hughes (2014): Isogeometric contact: a review, GAMM‐Mitteilungen, 37 (1), pp. 85-123, DOI: 10.1002/gamm.201410005

M. Bauer, T. Schilling, M. Weidling, D. Hartung, Ch. Biskup, P. Wriggers, F. Wacker, Fr. -W. Bach, A. Haverich, T. Hassel (2014): Geometric adaption of biodegradable magnesium alloy scaffolds to stabilise biological myocardial grafts. Part I, Journal of Materials Science: Materials in Medicine, Volume 25, Issue 3, Page 909-916, DOI 10.1007/s10856-013-5100-5

M. Holl, T. Rogge, S. Loehnert, P. Wriggers, R. Rolfes (2014): 3D multiscale crack propagation using the XFEM applied to a gas turbine blade, Computational Mechanics; Vol. 53; Issue 1; pages 173-188; DOI: 10.1007/s00466-013-0900-5

R. Dimitri, L. De Lorenzis, M.A. Scott, P. Wriggers, R.L. Taylor, G. Zavarise (2014): Isogeometric large deformation frictionless contact using T-splines, 213. Computer Methods in Applied Mechanics and Engineering, Volume 269, pp. 394-414, DOI: 10.1016/j.cma.2013.11.002

S.O.R. Biabanaki, A.R. Khoei, P. Wriggers (2014): Polygonal finite element methods for contact-impact problems on non-conformal meshes, Computer Methods in Applied Mechanics and Engineering, Volume 269, pp. 198-221, DOI: 10.1016/j.cma.2013.10.025

T. Wu, I. Temizer and P. Wriggers (2014): Multiscale Hydro-Thermo-Chemo-Mechanical Coupling: Application to Alkali-Silica Reaction, Journal of Computational Material Science, Vol 84, 381-395.

2013

E. Lehmann, D. Faßmann, S. Loehnert, M. Schaper, P. Wriggers (2013): Texture development and formability prediction for pre-textured cold rolled body-centred cubic steel, Int. J. Eng. Sci., 68: 24-37

F. Auricchio, L. Beirao da Velga, C. Lovadina, A. Reali, R. L. Taylor, P. Wriggers (2013): Approximation of incompressible large deformation elastic problems: some unresolved issues, Computational Mechanics, DOI: 10.1007/s00466-013-0869-0

I.Temizer, T.Wu, P.Wriggers (2013) (2013): On the Optimality of the Window Method in Computational Homogenization , International Journal of Engineering Science, Vol. 64; page 66-73.

L. de Lorenzis, P. Wriggers (2013): Computational homogenization of rubber friction on rough rigid surfaces, Computational Materials Science, Vol. 77, pages 264-280

M. Holl, S. Loehnert, P. Wriggers (2013): An adaptive multiscale method for crack propagation and crack coalescence, International Journal for Numerical Methods in Engineering; Vol. 93; Issue 1; pages 23-51; DOI: 10.1002/nme.4373

M. Paggi, E. Lehmann, C. Weber, A. Carpinteri, P. Wriggers, M. Schaper (2013): A numerical investigation of the interplay between cohesive cracking and plasticity in polycrystalline materials, Computational Materials Science, 77: 81-92

P. Wriggers, J. Schröder, A. Schwarz (2013): A finite element method for contact using a third medium, Computational Mechanics, Vol. 52, pages 837-847

S. Besdo, A.-K. Krüger, Ch. Rössig, P. Helmecke, H. Waizy, P. Wriggers, N. Angrisani, J. Reifenrath (2013): Finite Element Study of Degradable Intramedullary Nails out of Magnesium Alloy for Ovine Tibiae, Biomedical Engineering/Biomedizinische Technik

T. Gerasimov, E. Stein, P. Wriggers (2013): New simple, cheap and efficient explicit error estimator for adaptive finite element analysis in elasticity and fracture, submitted to IJNME

T.Wu, I.Temizer and P.Wriggers (2013): Computational Thermal Homogenization of Concrete, Journal of Cement and Concrete Composites, Vol 35(1), 59-70.

2012

B. Avci and P. Wriggers (2012): A DEM-FEM coupling approach for the direct numerical simulation of 3D particulate flows, Journal of Applied Mechanics, Vol. 79, 010901-(1-7).

C. Prange, S. Loehnert, P. Wriggers (2012): Error estimation for crack simulations using the XFEM., International Journal for Numerical Methods in Engineering, vol 91, pp. 1459 - 1474

C. Wellmann and P. Wriggers (2012): A two-scale model of granular materials, Computer Methods in Applied Mechanics and Engineering, Vol. 205-208, 46-58.

D.S. Mueller-Hoeppe, P. Wriggers, S. Loehnert (2012): Crack face contact for a hexahedral-based XFEM formulation, Computational Mechanics, vol 49, pp. 725-734

E. Lehmann et. al. (2012): Material model identification for DC04 based on the numerical modelling of the polycrystalline microstructure and experimental data., Key Eng. Mater., 504-506: 993-998

E. Lehmann, S. Loehnert, P. Wriggers (2012): Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformation, Technische Mechanik, 32 (2-5): 369-379

E. Lehmann, S. Loehnert, P. Wriggers (2012): About the Microstructural Effects of Polycrystalline Materials and their Macroscopic Representation at Finite Deformation, Proc. Appl. Math. Mech., 12 (1): 275-276

I. Temizer, P. Wriggers and T.R.J. Hughes (2012): Three-Dimensional Mortar-Based Frictional Contact Treatment in Isogeometric Analysis with NURBS, Computer Methods in Applied Mechanics and Engineering, v.209-212 p.115-128.

S. Loehnert, C. Prange, P. Wriggers (2012): Error Controlled Adaptive Multiscale XFEM Simulation of Cracks, International Journal of Fracture, vol 178, pp. 147-156

2011

E. Lehmann, S. Loehnert, P. Wriggers (2011): Towards the Effective Behaviour of Polycrystalline Materials for Sheet Bulk Metal Forming Processes, AIP Conf. Proc., 1353: 1179-1184

E. Lehmann, S. Loehnert, P. Wriggers (2011): Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformation, Proc. Appl. Math. Mech., 11 (1): 401-402

I. Temizer, P. Wriggers (2011): Homogenization in Finite Thermoelasticity, Journal of the Mechanics and Physics of Solids, v.59 p.344–372.

I. Temizer, P. Wriggers and T.R.J. Hughes (2011): Contact Treatment in Isogeometric Analysis with NURBS, Computer Methods in Applied Mechanics and Engineering, 200 pp. 1100-1112

J. Ma, I. Temizer and P. Wriggers (2011): Random homogenization analysis in linear elasticity based on analytical bounds, International Journal of Solids and Structures, 48 pp 280-291

J. Ma, P. Wriggers and W. Gao (2011): Dynamic optimization design of fuzzy-random truss structures based on the general dynamic reliability, Computational Mechanics

J. Ma, W. Gao, P. Wriggers, J.J. Chen, S. Sahraee (2011): Structural dynamic optimal design based on the dynamic reliability, Engineering Structures 33 (2)

J. Schröder and P. Wriggers and D. Balzani  (2011): A new Mixed Finite Element based on Different Approximations of the Minors of Deformation Tensors, Computer Methods in Applied Mechanics and Engineering, 200:3583-3600

L. de Lorenzis, I. Temizer, P. Wriggers and G. Zavarise (2011): A large deformation frictional contact formulation using NURBS-based isogeometric analysis, International Journal for Numerical Methods in Engineering, 87 pp 1278-1300

L. de Lorenzis, P. Wriggers and G. Zavarise (2011): Isogeometric analysis of 3D large deformation contact problems with the augmented Lagrangian formulation, Computational Mechancis, DOI 10.1007/s00466-011-0623-4

M. Paggi and P. Wriggers (2011): „A nonlocal cohesive zone model for finite thickness interfaces – Part I: Mathematical formulations and validation with molecular dynamics, Computational Material Science pp 1625-1633(2011)

M. Paggi and P. Wriggers (2011): A nonlocal cohesive zone model for finite thickness interfaces – Part II: FE Implementation and application to polycristalline materials, Computational Material Science pp 1634-1643

S. Loehnert, D.S. Mueller-Hoeppe, P. Wriggers (2011): 3D corrected XFEM approach and extension to finite deformation theory, International Journal for Numerical Methods in Engineering, vol 86, pp. 431 - 452

2010

C. Weißenfels and P. Wriggers (2010): Numerical modeling of electrical contacts, Computational Mechanics, 46, pp. 301-314

E. Lehmann, S. Loehnert, P. Wriggers (2010): Modelling Metals at Finite Deformation, Proc. Appl. Math. Mech., 10 (1): 305-306

I. Temizer and P. Wriggers (2010): Thermal contact conductance characterization via computational contact homogenization: A finite deformation theory framework, International Journal for Numerical Methods in Engineering, 83 pp. 24-58

I. Temizer and P. Wriggers (2010): A micromechanically motivated higher-order continuum formulation of linear thermal conduction, ZAMM, 90 pp. 768-782

I. Temizer and P. Wriggers (2010): Inelastic analysis of granular interfaces via computational contact homogenization, International Journal for Numerical Methods in Engineering, 84 pp. 883-915

I. Temizer, P. Wriggers (2010): An Adaptive Multiscale Resolution Strategy for the Finite Deformation Analysis of Microheterogeneous Structures, Comput. Methods Appl. Mech. Engrg. v.200 p.2639-2661

J. Korelc, U. Šolinc and P. Wriggers (2010): An improved EAS brick element for finite deformation, Computational Mechanics, 46, pp. 641-650

J. Ma, W. Gao, P. Wriggers, T. Wu and S. Sahraee (2010): The analyses of dynamic response and reliability of fuzzy-random truss under stationary stochastic excitation, Computational Mechanics, 45 pp. 443-455

2009

B.A. Lau, R. Bader, A. Schneider, P.Wriggers (2009): Finite-element transient calculation of a bell struck by a clapper, Concepts, Experiments, and Fieldwork: Studies in Systematic Musicology and Ethnomusicology, Peter Lang, December 2009

D.S. Mueller-Hoeppe, S. Loehnert, P. Wriggers (2009): A finite deformation brick element with inhomogeneous mode enhancement, International Journal for Numerical Methods in Engineering, vol 78, pp. 1164 - 1187

P. Wriggers, B. Avci, S. Woltering (2009): Schwingungsreduktion einer Pontonanlage in Bremerhaven, Bauingenieur

P. Wriggers, J. Reinelt (2009): Multi-scale Approach for Frictional Contact of Elastomers on Rough Rigid Surfaces., Computer Methods in Applied Mechanics and Engineering, 198:1996-2008

R. A. Sauer and P. Wriggers (2009): Formulation and analysis of a 3D finite element implementation for adhesive contact at the nanoscale,, Comp. Meth. Appl. Mech. Engrg., DOI: 10.1016/j.cma.2009.08.019

T. Liu, G. Liu, P. Wriggers, S Zhu (2009): Study on Contact Characteristic of Nanoscale Asperities by Using Molecular Dynamic Simulations., Journal of Tribology, 131:022001-1-022001-10

2008

C. Wellmann, C. Lillie and P. Wriggers  (2008): A Contact Detection Algorithm for Superellipsoids based on the Common-Normal Concept , Engineering Computations, 25(5), pp. 432-442  | file | more ...

C. Wellmann, C. Lillie and P. Wriggers (2008): Comparison of the macroscopic behavior of granular materials modeled by different constitutive equations on the microscale, Finite Elements in Analysis and Design, Vol. 44(5), pp. 259-271  | file | more ...

C. Wellmann, C. Lillie and P. Wriggers (2008): Homogenization of granular material modeled by a three-dimensional Discrete Element Method, Computers and Geotechnics, 35(3), pp. 394-405  | file | more ...

D. Sheng, H. Yamamoto, P. Wriggers (2008): Finite element analysis of enlarged end piles using frictional contact., Solids and Foundations, 48:1-14

E. Boerner, P. Wriggers (2008): A macro-element for incompressible finite deformations based on a volume averaged deformation gradient., Computational Mechanics, 42:407-416

I. Temizer, P. Wriggers (2008): A Multiscale Contact Homogenization Technique for the Modeling of Third Bodies in the Contact Interface, Computer Methods in Applied Mechanics and Engineering, 198:377-396  | file |

I. Temizer, P. Wriggers (2008): On a Mass Conservation Criterion in Micro-to-Macro Transitions., Journal of Applied Mechanics, Trans. ASME, v.75 p.054503  | file | more ...

I. Temizer, P. Wriggers (2008): On the computation of the macroscopic tangent for multiscale volumetric homogenization problems, Comput. Methods Appl. Mech. Engrg. 198, pp. 495-510 (doi:10.1016/j.cma.2008.08.018)  | file | more ...

M. Hain and P. Wriggers (2008): On the numerical homogenization of hardened cement paste, Computational Mechanics, 42, pp. 197-212

M. Hain, P. Wriggers (2008): Computational Homogenization of micro-structural Damage due to Frost in Hardened Cement Paste., Finite Elements in Analysis and Design, 44:223-244

O. Allix, U. Perego and P. Wriggers (2008): Special issue: Challenges in computationalmechanics, Computational Mechanics, 42 pp. 145-146

P. M. Pimenta, E. M. B. Campello, P. Wriggers (2008): An exact conserving algorithm for nonlinear dynamics with rotational DOFs and general hyperelasticity. Part 1: Rods., Computational Mechanics, 42:715-732

P. Wriggers, G. Zavarise (2008): A formulation for frictionless contact problems using a weak form introduced by Nitsche., Computational Mechanics, 41:407-420

S. Löhnert and P. Wriggers (2008): Effective Behaviour of Elastic Heterogeneous Thin Structures at Finite Deformations, Computational Mechanics, 41, pp. 595 - 606

Wriggers P., Siplivaya M., Joukova I., Slivin R. (2008): Intelligent support of the processing stage of engineering analysis using case-based reasoning., Engineering with Computers, 24:384-404

2007

D. Fressmann, P. Wriggers (2007): Advection Approaches for single- and multi-level materials: Arbitrary Lagrangian-Eulerian finite element procedures., Computational Mechanics, 39:153-190

D. Sheng, P. Wriggers, S. W. Sloan (2007): Application of Frictional Contact in Geotechnical Engineering., International Journal of Geomechanics, :176-185

E. Boerner, S. Loehnert, P. Wriggers (2007): A new finite element based on the theory of a Cosserat point - extension to initially distorted elements for 2D plane strain., International Journal for Numerical Methods in Engineering, 71:454-472

E. Boerner, S. Loehnert, P. Wriggers (2007): A new finite element based on the theory of a Cosserat point - extension to initially distorted elements for 2D plane strain., Int. J. Numer. Meth. Engng., 71, 454 - 472

E. M. B. Campello, P. M. Pimenta, P. Wriggers (2007): Elastic-plastic analysis of metallic shells at finite strains., Rem-Revista Escola de Minas, 60:381-389

I. Temizer, P. Wriggers (2007): An adaptive method for homogenization in orthotropic nonlinear elasticity, Computer Methods in Applied Mechanics and Engineering, 196:3409-3423  | file |

K. Krabbenhoft, A. V. Lyamin, S. W. Sloan, P. Wriggers (2007): An interior-point algorithm for elastoplasticity., International Journal for Numerical Methods in Engineering, 69:592-626

P. Wriggers, M. Hain (2007): Frostschädigung von Zementstein., Bauingenieur, 82:479-486

Wriggers P., Siplivaya M., Joukova I., Slivin R. (2007): Intelligent support of engineering analysis using ontology and case-based reasoning., Engineering Application of Artificial Intelligence, 20:709-720

2006

D. Sheng, P. Wriggers, S. W. Sloan (2006): Improved numerical algortihms for frictional contact in pile penetration analysis., Computers and Geotechnics, 33:341-354

K. A. Fischer, P. Wriggers (2006): Mortar based frictional contact formulation for higher order interpolations using the moving friction cone., Computer Methods in Applied Mechanics and Engineering, 195:5020-5036

P. Wriggers, K. Chavan (2006): Beam and Shell Elements for Thin-walled Aluminium Structures., Foundations of Civil and Environmental Engineering, 7:397-412

P. Wriggers, S. O. Moftah (2006): Mesoscale models for concrete: Homogenization and damage behaviour., Finite Element Analysis and Design, 42:623-636

2005

A. Soroushian, P. Wriggers and J. Farjoodi (2005): On practical integration of semi-discretized nonlinear equations of motion. Part 1: Reasons for probable instability and improper convergence, Journal of Sound and Vibration, 284, pp. 705-731

D. Boso, P. Litewka, B. A. Schrefler, P. Wriggers (2005): A 3D beam-to-beam contact finite element for coupled electric-mechanical fields., International Journal for Numerical Methods in Engineering, 64:1800-1815

D. Sheng, K. D. Eigenbrod, P. Wriggers (2005): Finite element analysis of pile installation using large-slip frictional contact., Computers and Geotechnics, 32:17-26

H. W. Zhang, H. Wang, P. Wriggers, B. A. Schrefler (2005): A finite element model for contact analysis of multiple Cosserat bodies., Computational Mechanics, 36:444-458

K. A. Fischer, P. Wriggers (2005): Frictionless 2D Contact formulations for finite deformations based on the mortar method., Computational Mechanics, 36:226-244

M. Andre, P. Wriggers (2005): Thermomechanical behaviour of rubber materials during vulcanization., International Journal of Solids & Structures, 42:4758-4778

M. Hain, P. Wriggers (2005): Mikrostruktursimulation von Zementstein., Bauingenieur, 80:313-319

P. Wriggers (2005): Buchbesprechung: Kontinuums- und Kontaktmechanik von K. Willner., Technische Mechanik

S. Loehnert, E. Boerner, M. Rubin, P. Wriggers (2005): Response of a nonlinear elastic general Cosserat brick element in simulations typically exhibiting locking and hourglassing., Computational Mechanics, 36:255-265

T. Raible, K. Tegeler, S. Loehnert, P. Wriggers (2005): Development of a wrinkling algorithm for orthotropic membrane materials., Computer Methods in Applied Mechanics and Engineering, 194:2550-2568

2004

A. Rieger, P. Wriggers (2004): Adaptive methods for thermo-mechanical contact problems., International Journal for Numerical Methods in Engineering, 58:871-894

A.A. Bandeira, P. Wriggers and P. de Mattos Pimenta (2004): Homogenization methods leading to interface laws of contact mechanics, International Journal for Numerical Methods in Engineering, 59, pp. 173-195

Bandeira, A. A., P. Wriggers, P. de Mattos Pimenta (2004): Homogenization methods leading to interface laws of contact mechanics., International Journal for Numerical Methods in Engineering, 59:173-195

C. Sansour, P. Wriggers, J. Sansour (2004): On the design of energy-momentum integration schemes for arbitrary continuum formulations. Applications to classical and chaotic motion of shells., International Journal for Numerical Methods in Engineering, 60:2419-2440

F. Liu, P. Wriggers, L. Li (2004): Wear simulation based on node-to-segment element., Key Engineering Materials, 274-276:577-582

H. W. Zhang, S. Y. He, X. S. Li, P. Wriggers (2004): A new algorithm for numerical solution of 3d elastoplastic contact problems with orthotropic friction law., Computational Mechanics, 34:1-14

J. Nettingsmeier, P. Wriggers (2004): Frictional contact of elastomer materials on rough rigid surfaces., PAMM, 4:360-361

K. Chavan, P. Wriggers (2004): Consistent Coupling of Beam and Shell Models for Thermo-elastic Analysis., International Journal for Numerical Methods in Engineering, 59:1861-1878

P. M. Pimenta, E. M. B. Campello, P. Wriggers (2004): A fully nonlinear multi-parameter shell model with thickness variation and a triangular shell finite element formulation., Computational Mechanics, 34:181-193

P. Wriggers (2004): Book Review: S. Mohammadi, Discontinuum Mechanics using Finite and Discrete Elements., ZAMM, 84:774

P. Wriggers and G. Zavarise (2004): Computational Contact Mechanics, Encyclopedia of Computational Mechanics, eds. E. Stein, R. de Borst and T. J. R. Hughes, Wiley, Chichester

P. Wriggers and L. Krstulovic-Opara (2004): The moving friction cone approach for three dimensional contact simulations, Journal of Computational Methods 1 pp.115-119

P. Wriggers, E. Stein (2004): Multi-Skalen Methoden und Modelladaptivität bei der Berechnung von komplexen Strukturen., Bauingenieur, :497-505

P. Wriggers, L. Krstulovic-Opara (2004): The Moving Friction Cone approach for three-dimensional contact simulations., International Journal of Computational Methods, 1:105-119

2003

A. Rieger, P. Wriggers (2003): Comparison of Different Error Indicators for Contact Problems Involving Large Elastic Strains., Applicable Analysis, 82:575-601

A. Soroushian, P. Wriggers, J. Farjoodi (2003): A practical upper-bound on errors associated with Richardson extrapolation and its application in time integration analysis., comstr

C. Sansour, P. Wriggers, J. Sansour (2003): A finite element post-processed Galerkin method for dimensional reduction in the nonlinear dynamics of solids. Applications to shells., Computational Mechanics, 32:104-114

E. M. B. Campello, P. M. Pimenta, P. Wriggers (2003): A triangular finte shell element based on a fully nonlinear shell formulation., Computational Mechanics, 31:505-518

H. Tschöpe and E. Onate and P. Wriggers (2003): Comparison of the Critical Displacement Method and the Extended System for critical point computations, EngineeringComputation, 5/6, pp. 611-628

H. Tschöpe, E. Onate, P. Wriggers (2003): Direct Computation of instability points with inequality constraints using FEM., Engineering Computation, 5/6:611-628

H. Tschöpe, P. Wriggers, E. Onate (2003): Direct computation of instability points for contact problems., Computational Mechanics, 31:173-178

H. W. Zhang, B. Schrefler, P. Wriggers (2003): Interaction between different internal length scales for strain localization analysis of single phase materials., Computational Mechanics, 30:212-219

N. Krstulovic-Opara, J. Nau, P. Wriggers, L. Krstulovic-Opara (2003): Auto-adaptive composite structures with self-actuating SMA-HPFRCC fuses., International Journal of Computer-Aided Civil and Infrastructural Engineering, 18:78-94

P. Wriggers, A. Haraldsson (2003): A simple formulation for two-dimensional contact problems using a moving friction cone., Communications in Numerical Methods in Engineering, 19:285-295

S. Löhnert, P. Wriggers (2003): Homogenization of micro-heterogeneous materials considering interfacial delamination at finite strains., Technische Mechanik, 23:167-177

T. Raible, S. Loehnert, K. Tegeler, P. Wriggers (2003): Analysis wrinkling states in membranes.

2002

C. S. Han, P. Wriggers (2002): On the error indication of shells in unilateral fricionless contact., Computational Mechanics, 28:169-176

C. Sansour, W. Wagner, P. Wriggers, J. Sansour (2002): An energy-momentum integration scheme and enhanced strain finite elements for the non-linear dynamics of shells., Non-Linear Mechanics, 37:951-966

G. D. Hu, P. Wriggers (2002): On the adaptive finite element method of steady-state rolling contact for hyperelasticity in finite deformations., Computer Methods in Applied Mechanics and Engineering, 191:1333-1348

L. Krstulovic-Opara, P. Wriggers, J. Korelc (2002): A C1-continuous formulation for 3D finite deformation frictional contact., Computational Mechanics, 29:27-42

P. Litewka, P. Wriggers (2002): Frictional Contact between 3D-beams with rectangular cross section., Computational Mechanics, 28:26-39

P. Litewka, P. Wriggers (2002): Contact between 3D-beams with rectangular cross section., International Journal for Numerical Methods in Engineering, 53:2019-2042

P. Wriggers (2002): Rechnergestütztes Materialdesign., Braunschweigisch Wissenschaftliche Gesellschaft, Jahrbuch 2001, :61-64

2001

A. Haraldsson, P. Wriggers (2001): A strategy for numerical testing of frictional laws with application to contact between soil and concrete., Computer Methods in Applied Mechanics and Engineering, 190:963-978

A. Rieger, P. Wriggers (2001): Adaptive methods for frictionless contact problems., Computers and Structures, 79:2197-2208

E. Onate, H. Tschöpe, P. Wriggers (2001): Combination of the critical displacement method with a damage model for structural instability analysis., Engineering Computation, 18:642-662

L. Krstulovic-Opara, P. Wriggers, J. Korelc (2001): Rolling contact simulations with frictional contact elements using Lagrangian description., Zeitschrift für angewandte Mathematik und Mechanik, 81:S397-S398

P. Wriggers, L. Krstulovic-Opara, J. Korelc (2001): Smooth C1- interpolations for two-dimensional frictional contact problems., International Journal for Numerical Methods in Engineering, 51:1469-1495

S. H. Lee, C. S. Han, S. I. Oh, P. Wriggers (2001): Comparative crash simulations incorporating the results of sheet forming analyses., Engineering Computations, 18:744-758

T. I. Zohdi, P. Wriggers (2001): Computational micro-macro material testing., Archives of Computational Methods in Engineering, 8:131-228

T. Zohdi, P. Wriggers (2001): Aspects of the computational testing of the mechanical properties of microheterogeneous material samples., International Journal for Numerical Methods in Engineering, 50:2573-2599

T. Zohdi, P. Wriggers (2001): A model for simulating the detioration of structural-scale material responses of microheterogeneous solids., Computer Methods in Applied Mechanics and Engineering, 190:2803-2824

T. Zohdi, P. Wriggers (2001): A consistent Petrov-Galerkin transformation that eliminates spurious oscillations for heterogeneous diffusion-reaction equations., Computational Material Science

T. Zohdi, P. Wriggers (2001): Modeling and simulating of the decohesion of particulate aggregates in a binding matrix., Engineering Computations, 18:79-95

T. Zohdi, P. Wriggers, C. Huet (2001): A method of substructuring large-scale computational micromechanical problems., Computer Methods in Applied Mechanics and Engineering, 190:5639-5656

2000

G. Zavarise, P. Wriggers (2000): Contact with friction between beams in 3-D space., International Journal for Numerical Methods in Engineering, 49:977-1006

H. Braess, P. Wriggers (2000): Arbitrary Lagrangian Eulerian finite element analysis of free surface flows., Computer Methods in Applied Mechanics and Engineering, 190:95-110

Hu, G. D., Panagiotopoulos, P. D., Panagouli, O., Scherf, O., Wriggers, P. (2000): Adaptive Finite Element Analysis of Fractal Interfaces in Contact Problems., Computer Methods in Applied Mechanics and Engineering, 182:17-38

P. Wriggers, A. Rieger, O. Scherf (2000): Comparison of different error measures for adaptive finite element techniques applied to contact problems involving large elastic strains., Computer Methods in Applied Mechanics and Engineering

P. Wriggers, L. Krstulovic-Opara (2000): On Smooth Finite Element Discretization for Frictional Contact Problems., Zeitschrift für angewandte Mathematik und Mechanik, 80,S1:77-80

S. Reese, P. Wriggers (2000): A new stabilization concept for finite elements in large deformation problems., International Journal for Numerical Methods in Engineering, 48:79-110

S. Reese, P. Wriggers, B. D. Reddy (2000): A new locking-free brick element technique for large deformation problems in elasticity., Computers and Structures, 75:291-304

T. I. Zohdi, P. Wriggers (2000): A computational model for interfacial damage through microstructural cohesive zone relaxation., The International Journal of Fracture, 101:L9-L14

T. I. Zohdi, P. Wriggers (2000): Phenomenological modeling and numerical simulation of the environmental degradation of multiphase engineering materials., Archive of Applied Mechanics, 70:47-64

T. I. Zohdi, P. Wriggers (2000): On the sensitivity of homogenized material responses at infinitesimal and finite strains., Communications in Numerical Methods in Engineering, 16:657-670

1999

C. Carstensen, O. Scherf, P. Wriggers (1999): Adaptive finite elements for elastic bodies in contact., SIAM Journal of Scientific Computing, 20:1605-1626

G. Zavarise, P. Wriggers (1999): A superlinear convergent augmented Lagrangian procedure for contact problems., Engineering Computations, 16:88-119

R. Eberlein, P. Wriggers (1999): Finite Element Concepts for Finite Elastoplastic Strains and Isotropic Stress Response in Shells: Theoretical and Computational Analysis., Computer Methods in Applied Mechanics and Engineering, 171:243-279

T. I. Zohdi, K. Hutter, P. Wriggers (1999): A technique to describe the macroscopic pressure dependence of diffusive properties of solid materials containing heterogeneities., Computational Materials Science, 15:69-88

T. I. Zohdi, P. Wriggers (1999): On the effects of microstress on macroscopic diffusion processes., Acta Mechanica, 136:91-107

T. Zohdi, P. Wriggers (1999): A domain decomposition method for bodies with heterogeneous microstructure based on material regularization., International Journal of Solids & Structures, 136:2507-2527

T. Zohdi, P. Wriggers (1999): Microstructural decomposition error estimates., Zeitschrift für angewandte Mathematik und Mechanik, 79:155-158

1998

C. S. Han, P. Wriggers (1998): A simple local a posteriori bending indicator for axisymmetrical membrane and bending shell elements., Engineering Computations, 15:977-988

G. Zavarise, P. Wriggers (1998): A segment-to-segment contact strategy., Mathematics and Computer Modelling, 28:497-515

G. Zavarise, P. Wriggers, B. A. Schrefler (1998): A method for solving contact problems., International Journal for Numerical Methods in Engineering, 42:473-498

P. Wriggers, A. Boersma (1998): A parallel algebraic multigrid solver for problems in solid mechanics discretized by finite elements., Computers and Structures, 69:129-137

P. Wriggers, G. Zavarise, T. Zohdi (1998): A computational study of interfacial debonding damage in fibrous composites materials., Computational Materials Science, 12:39-56

P. Wriggers, O. Scherf (1998): Adaptive finite element techniques for frictional contact problems involving large elastic strains., Computer Methods in Applied Mechanics and Engineering, 151:593-603

P. Wriggers, O. Scherf (1998): Different a posteriori error estimators and indicators for contact problems., Mathematics and Computer Modelling, 28:437-447

R. Eberlein, P. Wriggers (1998): On the Calculation of Finite Plastic Strains in Shell Intersections with Finite Elements., Technische Mechanik, 18:181-188

S. Reese, M. Kussner, B. D. Reddy, P. Wriggers (1998): Eine neue Stabilisierungstechnik fur finite Elemente in der finiten Elastizitat., Zeitschrift für angewandte Mathematik und Mechanik, 78

S. Reese, P. Wriggers (1998): Thermoviscoelastic material behaviour at finite deformations with temperature-dependent material parameters., Zeitschrift für angewandte Mathematik und Mechanik, 78

T. Zohdi, M. Feucht, D. Gross, P. Wriggers (1998): A description of macroscopic damage through microstructural relaxation., International Journal for Numerical Methods in Engineering, 143:493-506

1997

A. Boersma, P. Wriggers (1997): An algebraic multigrid solver for finite element computations in solid mechanics., Engineering Computations, 14:202-215

A. Haraldsson, C. S. Han, H. Tschöpe, P. Wriggers (1997): Shape optimization of a lubricated journal bearing with regard to the distribution of pressure in the fluid., Engineering Optimization, 29:259-275

C. Carstensen, P. Wriggers (1997): On the Symmetric boundary element method and the symmetric coupling of boundary elements and finite elements., IMA J. Num. Analysis, 17:201-238

C. Sansour, P. Wriggers, J. Sansour (1997): Nonlinear Dynamics of Shells: Theory, Finite Element Formulation and Integration Schemes., Nonlinear Dynamics, 13:279-305

E. Kirchner, S. Reese, P. Wriggers (1997): A finite element method for plane stress problems with large elasto-plastic deformations., Communications in Applied Numerical Methods, 13:963-976

P. Wriggers, G. Zavarise (1997): On contact between three-dimensional beams undergoing large deflections., Communications in Applied Numerical Methods, 13:429-438

S. Meynen, A. Boersma, P. Wriggers (1997): Application of a parallel algebraic multigrid method for the solution of elasto-plastic shell problems., Numerical Linear Algebra with Application, 4:223-238

S. Reese, P. Wriggers (1997): A material model for rubber-like polymers exhibiting plastic deformation: computational aspects and a comparison with experimental results., Computer Methods in Applied Mechanics and Engineering, 148:279-298

S. Reese, P. Wriggers (1997): Material Instabilities of an Incompressible Elastic Cube under Triaxial Tension., International Journal of Solids & Structures, 34:3433-3454

1996

C. Leppin, P. Wriggers (1996): Numerical Simulation of Rapid Crack Propagation in Viscoplastic Materials., Computers and Structures, 61:1169-1175

C. Sansour, J. Sansour, P. Wriggers (1996): A Finite Element Approach to the Chaotic Motion of Geometrically Exact Rods undergoing Plane Deformations., Nonlinear Dynamics, 11:189-212

G. Zavarise, P. Wriggers (1996): On the Efficiency of New and Old Strategies for Solving Contact Problems., Zeitschrift für angewandte Mathematik und Mechanik, 76:563-564

G.A. Holzapfel, R. Eberlein, P. Wriggers, H.W. Weizsäcker (1996): A new axisymmetrical membrane element for anisotropic, finite strain analysis of arteries., Communications in Applied Numerical Methods, 12:507-517

G.A. Holzapfel, R. Eberlein, P. Wriggers, H.W. Weizsäcker (1996): Large strain analysis of soft biological and rubber-like membranes: Formulation and finite element analysis., Computer Methods in Applied Mechanics and Engineering, 132:45-61

J. Korelc, P. Wriggers (1996): Improved enhanced strain 3-D element with Taylor expansion of shape functions., Computational Mechanics, 19:30-40

J. Korelc, P. Wriggers (1996): Consistent gradient formulation for a stable enhanced strain method for large deformations., Engineering Computations, 13:103-123

P. Wriggers (1996): On Finite Element Methods for Contact Problems with Friction., Tribology International, 29:651-658

P. Wriggers, J.Korelc (1996): On enhanced strain methods for small and finite deformations of solids., Computational Mechanics, 18:413-428

P. Wriggers, R. Eberlein, S. Reese (1996): Comparison between Shell and 3D-Elements in Finite Plasticity., International Journal of Solids & Structures, 33:3309-3326

P. Wriggers, S. Reese (1996): A note on enhanced strain methods for large deformations., Computer Methods in Applied Mechanics and Engineering, 135:201-209

P. Wriggers, U. Hueck (1996): A Formulation of the Enhanced QS6-Element for Large Elastic Deformations., International Journal for Numerical Methods in Engineering, 39:3039-3053

S. Reese, P. Wriggers (1996): Finite element calculation of the stability behaviour of hyperelastic solids with the enhanced strain method., Zeitschrift für angewandte Mathematik und Mechanik, 76:415-416

1995

G. Zavarise, P. Wriggers, B. A. Schrefler (1995): On Augmented Lagrangian Algorithms for Thermomechanical Contact Problems with Friction., International Journal for Numerical Methods in Engineering, 38:2929-2949

L. Bernspang, M. Küssner, P. Wriggers, A. Samuelson (1995): The consistent strain method in finite element plasticity., Computers and Structures, 54:27-33

M. Küssner, P. Wriggers (1995): Zur numerischen Lösung plastischer Probleme mit Elementen niederer Ordnung., Zeitschrift für angewandte Mathematik und Mechanik

M. Küssner, P. Wriggers (1995): On consistent strain methods for nonlinear problems., Proceedings of Conference

P. Wriggers (1995): Finite Element Algorithms for Contact Problems., Archive of Computational Methods in Engineering, 2:1-49

P. Wriggers, O. Scherf (1995): An adaptive finite element for contact problems in plasticity., Computational Mechanics, 17:88-97

P. Wriggers, O. Scherf, C. Carstensen (1995): An adaptive finite element model for frictionless contact problems., Zeitschrift für angewandte Mathematik und Mechanik, 75:T37-T40

P. Wriggers, R. Eberlein, F. Gruttmann (1995): An Axisymmetrical Quasi-Kirchhoff-Type Shell Element for Large Plastic Deformations., Archiv of Applied Mechanics, 65:465-477

S. Reese, P. Wriggers (1995): A finite element method for stability problems in finite elasticity., International Journal for Numerical Methods in Engineering, 38:1171-1200

S. Reese, P. Wriggers (1995): Stabilitätsverhalten von Gummi in Anhängigkeit von den Material- parametern und der Belastung., Zeitschrift für angewandte Mathematik und Mechanik, 75:T167-T168

U. Hueck, H.L. Schreyer, P. Wriggers (1995): On the Incompressibility constraint of the Four-Node Quadrilateral Element., International Journal for Numerical Methods in Engineering, 38:3039-3053

U. Hueck, P. Wriggers (1995): A Formulation for the Four-Node Quadrilateral Element, Part I: Plane Element., International Journal for Numerical Methods in Engineering, 38:3007-3037

1994

S. Reese, P. Wriggers (1994): Stabilitätsverhalten von nichtlinear elastischen Werkstoffen., Zeitschrift für angewandte Mathematik und Mechanik, 74:T51-T53

U. Hueck, B.D. Reddy, P. Wriggers (1994): On the Stabilization of the rectangular four-node quadrilateral element., Communications in Applied Numerical Methods, 10:555-563

1993

C. Carstensen, P. Wriggers (1993): On Perturbation Behaviour in Nonlinear Dynamics., Communications in Applied Numerical Methods, 9:165-175

F. Gruttmann, W. Wagner, L. Meyer, P. Wriggers (1993): A Nonlinear Composite Shell Element with Continuous Interlaminar Shear Stresses., Computational Mechanics, 13:175-188

P. Wriggers, F. Gruttmann (1993): Thin shells with Finite Rotations formulated in Biot Stresses Theory and Finite-Element-Formulation., International Journal for Numerical Methods in Engineering, 36:2049-2071

P. Wriggers, G. Zavarise (1993): Thermomechanical Contact - A Rigorous but Simple Numerical Approach., Computers and Structures, 46:47-53

P. Wriggers, G. Zavarise (1993): On the Application of Augmented Lagrangian Techniques for Nonlinear Constitutive Laws in Contact Interfaces., Communications in Applied Numerical Methods, 9:815-824

P. Wriggers, M. Imhof (1993): On the Treatment of Nonlinear Unilateral Contact Problems., Ing. Archiv, 63:116-129

P. Wriggers, S. Reese (1993): Thermoelastische Stabilität von Fachwerken mit vollständiger thermomechanischer Kopplung und temperaturabhängigen Materialwerten., Zeitschrift für angewandte Mathematik und Mechanik, 73:T144-T147

R. Eberlein, P. Wriggers, R.L. Taylor (1993): A Fully Non-Linear Axisymmetrical Quasi-Kirchhoff-Type Shell Element for Rubberlike Materials., International Journal for Numerical Methods in Engineering, 36:4027-4043

1992

F. Gruttmann, W. Wagner, P. Wriggers (1992): A Nonlinear Quadrilateral Shell Element with Drilling Degrees of Freedom., Ingenieur Archiv, 62:474-486

G. Zavarise, P. Wriggers, E. Stein, B.A. Schrefler (1992): A Numerical Model for Thermomechanical Contact based on Microscopic Interface Laws., Mech. Res. Comm., 19:173-182

G. Zavarise, P. Wriggers, E. Stein, B.A. Schrefler (1992): Real Contact Mechanisms and Finite Element Formulation - A Coupled Thermomechanical Approach., International Journal for Numerical Methods in Engineering, 35:767-786

N. Müller-Hoeppe, P. Wriggers (1992): Numerical Integration of Viscoplastic Material Laws at Large Strains with Application to Impact Problems., Computers and Structures, 45:165-171

P. Wriggers, C. Carstensen (1992): An Efficient Algorithm for the Computation of Stability Points of Dynamical Systems under Step Load., Engineering Computations, 9:669-679

P. Wriggers, C. Miehe, M. Kleiber, J.C. Simo (1992): A Thermomechanical Approach to the Necking Problem., International Journal for Numerical Methods in Engineering, 33:869-883

P. Wriggers, S. Reese (1992): Thermoelastic Stability of Trusses with Temperature Dependent Constitutive Relations., International Journal for Numerical Methods in Engineering, 35:1891-1906

1991

J.C. Simo, R.L. Taylor, P. Wriggers (1991): A Note on Finite Element Implementation of Pressure Boundary Loading., Communications in Applied Numerical Methods, 7:513-525

1990

E. Stein, W. Wagner, P. Wriggers (1990): Nonlinear Stability Analysis of Shell- and Contact-Problems including Branch-Switching., Computational Mechanics, 5:428-446

P. Wriggers, J.C. Simo (1990): A General Procedure for the Direct Computation of Turning and Bifurcation Points., International Journal for Numerical Methods in Engineering, 30:155-176

P. Wriggers, R.L. Taylor (1990): A fully nonlinear axisymmetrical membrane element for rubberlike materials., Engineering Computations, 7:303-310

P. Wriggers, T. Vu Van, E. Stein (1990): Finite-Element-Formulation of Large Deformation Impact- Contact -Problems with Friction., Computers and Structures, 37:319-333

1989

E. Stein, P. Wriggers (1989): Computational Mechanics im Bereich der Festkörper- und Strukturmechanik unter Verwendung der Finite-Element-Methode., GAMM-Mitteilungsheft 2

F. Gruttmann, E. Stein, P. Wriggers (1989): Theory and Numerics of Thin Elastic Shells with Finite Rotations., Ing. Archiv, 59:54-67

P. Wriggers, N. Tarnow (1989): Interaktive Steuerung von nichtlinearen Finite-Element- Algorithmen mittels eines Expertensystems., Bauingenieur, 64:57-65

W. Wagner, P. Wriggers (1989): Ein quadratisch konvergentes Verfahren zur Berechnung von Stabilitätspunkten., Zeitschrift für angewandte Mathematik und Mechanik, 69:T219-222

1988

E. Stein, C. Miehe, R. Mahnken, U. Heemann, P. Wriggers (1988): Thermomechanische Probleme in der Strukturmechanik., Zeitschrift der Universität Hannover, 2:8-19

K.-D. Klee, P. Wriggers (1988): Finite-Elemente-Methode, Ein Konstruktionhilfsmittel für Bauingenieure., Baukultur, 1:7-9

P. Wriggers, E. Stein (1988): Die Verwendung von LIE-Ableitungen bei der Angabe von Spannungsflüssen für große Deformationen., Zeitschrift für angewandte Mathematik und Mechanik, 68:T264-T267

P. Wriggers, W. Wagner (1988): Konzepte zur Integration von Entwurf, Konstruktion, Berechnung und Ausführung., Baukultur, 1:10-11

P. Wriggers, W. Wagner, C. Miehe (1988): A Quadratically Convergent Procedure for the Calculation of Stability Points in Finite Element Analysis., Computer Methods in Applied Mechanics and Engineering, 70:329-347

W. Wagner, P. Wriggers (1988): A Simple Method for the Calculation of Secondary branches., Engineering Computations, 5:103-109

1987

B. Nour-Omid, P. Wriggers (1987): A Note on the Optimum Choice for Penalty Parameters., Communications in Applied Numerical Methods, 3:581-585

P. Wriggers, T. vu Van (1987): Zur Berechnung von Stoßvorgängen unter Berücksichtigung von geometrisch und physikalisch nichtlinearem Verhalten., Zeitschrift für angewandte Mathematik und Mechanik, 67:T134-T137

P. Wriggers, W. Wagner, E. Stein (1987): Algorithms for Nonlinear Contact Constraints with Application to Stability Problems of Rods and Shells., Computational Mechanics, 2:215-230

S. Clemens, P. Kroll, E. Stein, W. Wagner, P. Wriggers (1987): Experimental Studies on the Disappearence of Subretinal Fluid after Episcleral Buckling Procedures without Drainage., Graefes Arch. Clin. Exp. Opthalmol., 225:16-18

1986

B. Nour-Omid, P. Wriggers (1986): A Two-Level Iterative Method for the Solution of Contact Problems., Computer Methods in Applied Mechanics and Engineering, 54:131-144

G. Griebenow, P. Wriggers, K.-D. Klee (1986): EDV-unterstützte Standsicherheitsnachweise (Probleme mit der Computerstatik und Lösungswege., Bauingenieur, 61:455-458

J.C. Simo, P. Wriggers, K.-H. Schweizerhof, R.L. Taylor (1986): Postbuckling Analysis involving Inelasticity and Unilateral Constraints., International Journal for Numerical Methods in Engineering, 23:779-800

K. Schweizerhof, P. Wriggers (1986): Consistent Linearization for Path Following Methods in Nonlinear FE-Analysis., Computer Methods in Applied Mechanics and Engineering, 59:261-279

1985

E. Stein, P. Wriggers (1985): Der Einsatz von Mikrorechnern im Ingenieuralltag., Bauingenieur, 60:247-250

J. C. Simo, P. Wriggers, R. L. Taylor (1985): A Perturbed Lagrangian Formulation for the Finite Element Solution of Contact Problems., Computer Methods in Applied Mechanics and Engineering, 50:163-180

P. Wriggers, J.C. Simo (1985): A Note on Tangent Stiffnesses for Fully Nonlinear Contact Problems., Communications in Applied Numerical Methods, 1:199-203

P. Wriggers, W. Wagner (1985): Kurvenverfolgungsalgorithmen in der Strukturmechanik., Forschungs- und Seminarberichte aus dem Bereich der Mechanik der Universität Hannover, Bericht Nr. S 85/3

1984

E. Stein, P. Wriggers (1984): Stability of Rods with Unilateral Constraints, a Finite Element Solution., Computers and Structures, 19:205-211

K.-D. Klee, P. Wriggers (1984): Traglastberechnung ebener Stabtragwerke bei großen Verschiebungen und Verdrehungen., Zeitschrift für angewandte Mathematik und Mechanik, 64:T288-T290

K.-D. Klee, P. Wriggers (1984): On an Updated Lagrangian Formulation for Divergent Solution of Timoshenko Beams subjected to Circulatory Load., Mech. Res. Comm., 10:239-244

P. Wriggers, K.-D. Klee (1984): Zur Berechnung von Stäben unter nicht-konservativer Belastung mit Hilfe eines inkrementellen Arbeitsprinzipes., Zeitschrift für angewandte Mathematik und Mechanik, 64:T322-T324

1982

E. Stein, P. Wriggers (1982): Calculation of Impact-Contact Problems of Thin Elastic Shells taking into account Geometrical Nonlinearities within the Contact Region., Computer Methods in Applied Mechanics and Engineering, 34:861-880

P. Wriggers (1982): Zur Berechnung von Stoßvorgängen zwischen Kugelschalen., Zeitschrift für angewandte Mathematik und Mechanik, 62:T95-T98

1980

K.-D. Klee, P. Wriggers (1980): Zur Berechnung des Stosses eines zylindrischen Stabes auf eine starre Wand., Zeitschrift für angewandte Mathematik und Mechanik, 60:T130-T132

1979

P. Wriggers (1979): Zur Berechnung des Querstosses auf ein ebenes Stabtragwerk., Zeitschrift für angewandte Mathematik und Mechanik, 59:T164-T169

1978

R. Rohrbach, E. Stein, P. Wriggers (1978): Vergleichende Betrachtungen des Runge-Kutta-Nystroem- und des Newmark-Verfahrens zur Integration von Systemen nichtlinearer Bewegungsgleichungen., Zeitschrift für angewandte Mathematik und Mechanik, 58:T168-T170

1977

E. Stein, R. Rohrbach, P. Wriggers (1977): Zur numerischen Integration von Systemen nichtlinearer Bewegungsgleichungen., Pflüger-Festschrift, Hannover

Article in Conference Proceedings

2017

S. Julmi, C. Klose, A.-K. Krüger, P. Wriggers, H. J. Maier (2017): Development of Sponge Structure and Casting Conditions for Absorbable Magnesium Bone Implants, TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings
DOI: 10.1007/978-3-319-51493-2_29

2016

S. Yazdani, W.J.H. Rust, P. Wriggers (2016): A discontinuous shell element for the delamination analysis of composite laminates
DOI: 10.2514/6.2016-1971

T. Steiner, P. Wriggers, S. Loehnert (2016): A discontinuous Galerkin Finite Element Method for linear elasticity using a mixed integration scheme to circumvent shear-locking, Proc. Appl. Math. Mech., 16(2016)1, pp. 769 - 770
DOI: 10.1002/pamm.201610373

W.J.H. Rust, S. Yazdani, and P. Wriggers (2016): XFEM Analysis – including buckling – of composite shells containing delamination

2015

M. Marino, P. Wriggers (2015): Multiscale homogenization for the computational mechanics of cardiovascular structures: physiopathological behavior, Report of the Workshop Computational Engineering, Oberwolfach Reports 43:31-33
DOI: 10.4171/OWR/2015/43

S. Yazdani, W.J.H. Rust, P. Wriggers (2015): Mixed-mode delamination analysis of composite laminates with XFEM based on a cohesive zone model, 5th ECCOMAS Thematic Conference on Mechanical Response of Composites, Bristol, UK

S. Zeller, S. Beese, G. Gerstein, K. Isik, S. Loehnert, F. Nuernberger, P. Wriggers, H. Maier, A. Tekkaya (2015): Möglichkeiten der simulativen Vorhersage von Temperaturentwicklung und Bauteilversagen infolge plastischer Deformation bei DP600 Bauteilen, Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A. (Edt.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015), Aachen: Shaker Verlag, pp. 113-128

S. Zeller, S. Loehnert, P. Wriggers (2015): Modelling thermoplastic material behaviour of dual-phase steels on a microscopic length scale, Proc. Appl. Math. Mech., 15(2015)1, pp. 373 - 374

W.J.H. Rust, S. Yazdani, P. Wriggers (2015): Extended FEM (XFEM) entwickelt für die Analyse von Delaminationen in ANSYS, ANSYS Conference & 33. CADFEM Users’ Meeting 2015, Messe Bremen, Germany

W.T. Rust, P. Wriggers, B.D. Reddy (2015): Application of the virtual element method to non-conforming contact interfaces, Proceedings of the 8th International Congress of Croatian Society of Mechanics (8th ICCSM), I. Kožar, N. Bićanić, G. Jelenić, M. Čanađija, Opatija, Croatia, 29 September - 3 October 2015

2014

G.A. Drosopoulos, L. Plymakis, G.E. Stavroulakis, P. Wriggers (2014): Numerical Homogenization in Two-dimensional Elasticity Including Unilateral Cracks, Proceedings in Contact Mechanics International Symposium (CMIS), Abu Dhabi, UAE

2013

D. Faßmann, K. Isik, S. Zeller, S. Beese, N. Ben Khalifa, F. Nuernberger, M. Schaper, A. Tekkaya, S. Loehnert, P. Wriggers (2013): Abbildung des Werkstoffverhaltens von ferritischem Stahl in numerischen Modellen zur Darstellung von Blechmassivumformprozessen bei zyklischen Belastungspfaden, In: M. Merklein, B.-A. Behrens, A.E. Tekkaya (Edt.): Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013, (2013), pp. 69-84

G.A. Drosopoulos, P. Wriggers, G.E. Stavroulakis (2013): Contact Analysis in Multi-Scale Computational Homogenization, Proceedings of 3rd International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC), Prague, Czech Republic

G.A. Drosopoulos, P. Wriggers, G.E. Stavroulakis (2013): Incorporation of Contact Mechanics in Multi-level Computational Homogenization for the Study of Composite Materials, Proceedings of 3rd International Conference on Computational Contact Mechanics (ICCCM), Lecce, Italy

H. Clasen, C. B. Hirschberger, J. Korelc, P. Wriggers (2013): FE²-homogenization of micromorphic elasto-plastic materials, Proceedings of the 12th International Conference on Computational Plasticity (COMPLAS XII), September 3-5, 2013, Barcelona, Spain

M. Weidling, S. Besdo, T. Schilling, M. Bauer, T. Hassel, A. Haverich, P. Wriggers (2013): Finite element simulation of myocardial stabilising structures and development of new designs, In: Biomedical Engineering / Biomedizinische Technik 58 (Suppl. 1), DOI 10.1515/bmt-2013-4061

T. Wu, I. Temizer and P. Wriggers (2013): A Multiscale Method to analyze the deterioration due to Alkali Silica Reaction considering the effects of temperature and relative humidity, accepted by V Coupled Problem Conference

2012

E. Lehmann, S. Loehnert, P. Wriggers (2012): Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformation, 6th ECCOMAS Proc., e-Book Full Papers, 6213-6228

M. Bauer, T. Hassel, Ch. Biskup, D. Hartung, T. Schilling, M. Weidling, P. Wriggers, F. Wacker, Fr.-W. Bach, A. Haverich (2012): Geometric adaption of resorbable myocardial stabilizing structures based on the magnesium alloys LA63 and ZEK100 for the support of myocardial grafts on the left ventricle, In: Biomedical Engineering / Biomedizinische Technik 57 (Suppl. 1), DOI 10.1515/bmt-2012-4214

M. Paggi, E. Lehmann, C. Weber, A. Carpinteri, P. Wriggers (2012): 3D vs. 2D Modelling of Cracking and Plasticity in Polycrystalline Materials, 10th WCCM Proc.

T.Wu, I.Temizer and P.Wriggers (2012): Computational Thermal Homogenization of Concrete, PAMM

T.Wu, I.Temizer and P.Wriggers (2012): Multiscale Modeling of Alkali Silica Reaction Induced Damage in Concrete: Coupled Hydro-Chemical and Thermo-Mechanical Effects, 10th WCCM Proc., 2012(accepted)

2011

E. Lehmann, S. Loehnert, P. Wriggers (2011): Towards the Effective Behaviour of Polycrystalline Microstructures at Finite Strains, COMPLAS XI. Proc., 1573-1583

N. Hajibeik, I, Temizer, S. Löhnert, P. Wriggers (2011): Adaptive Multisclae Failure Analysis based on Error Estimation, Proceeding of the 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites

T.Wu, I.Temizer and P.Wriggers (2011): Computational Homogenization of Damage in the Hardened Cement Paste due to Alkali Silica Reaction, , PAMM · Proc. Appl. Math. Mech. 11, 561 – 562 (2011) / DOI 10.1002/pamm.201110270

T.Wu, I.Temizer and P.Wriggers (2011): A Method of Two-Scale Chemo-Thermal-Mechanical Coupling For Concrete,, In Computational Pasticity XI: Fundamentals and Applications, Barcelona, Spain, 1626–1637, (2011), COMPLASXI Proceedings

2010

C. Wellmann and P. Wriggers (2010): Homogenization of Granular Material modeled by a 3D DEM, Particle-Based Methods. Fundamentals and Applications, pp. 211-231, Springer, in press

P. Wriggers and S. Löhnert (2010): Characterization of Concrete by a Multiscale Approach, Proceedings of the International RILEM Conference on Material Science, Vol II, Ed. W. Brameshuber, pp 3-12, RILEM, S. A. R. L., Bagneux

T.Wu and P.Wriggers (2010): Chemo-Thermo-Mechanics Coupling Applied in Hardened Cement Paste. PAMM · Proc. Appl. Math. Mech. 10, 391 – 392 (2010) / DOI 10.1002/pamm.201010188

2009

C. Wellmann and P. Wriggers (2009): A 3D Coupled Finite-Discrete Element Method for Modeling the Interaction of Granular Materials and Solid Structures, Particle-Based Methods, Fundamentals and Applications, pp. 72-75

I. Temizer, P. Wriggers (2009): A contact homogenization framework for granular interfaces., Proceedings of the 80th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (February 9 - 13, 2009), Gdansk (Poland)

P. Wriggers and C. Wellmann (2009): Homogenization of Granular Material Modeled by a Three-Dimensional Discrete Element Method, Particle-Based Methods, Fundamentals and Applications, pp. 84-87

2008

C. Weißenfels and P. Wriggers (2008): A Finite Element Algorithm for Electromechanical Contact Problems, Proceedings in Applied Mathematics and Mechanics, 8, pp. 10493-10494

C. Wellmann and P. Wriggers (2008): A Coupled 3D Discrete-Finite Element Method for the Simulation of Granular Materials and Their Interaction with Solid Structures, Proceedings in Applied Mathematics and Mechanics, 8(1), pp. 10353-10354

C. Wellmann, C. Lillie, and P. Wriggers (2008): A Coupled Discrete-Finite Element Method Modeling the Interaction of Granular Materials and Solid Structures, CD-ROM Proceedings of the 8th World Congress on Computational Mechanics (WCCM 8) and the 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), CIMNE 2008

D. Mueller-Hoeppe, S. Loehnert and P. Wriggers (2008): A Computational Method for three Dimensional Finite Deformation Fracture, Proceedings of the XXII ICTAM, 25-29 August 2008, Adelaide, Australia

I. Temizer, P. Wriggers (2008): On the computation of the macroscopic tangent for multiscale volumetric homogenization problems., Proceedings of the 79th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (March 31 - April 4, 2008), Bremen

K. Krabbenhoft, M. Hain, P. Wriggers (2008): Computation of Effective Cement Paste Diffusivities from Microtomographic Images.

P. Wriggers and M. Hain (2008): Material Characterization based on MicrostructuralComputations and Homogenization, Proceedings of the IUTAM Symposium onTheoretical, Computational and Modelling Aspects of Inelastic Media, ed. D. Reddy

P. Wriggers, D. S. Mueller-Hoeppe, S. Loehnert (2008): Brick elements for finite deformations based on macro-concepts and on inhomogeneous mode enhancement, Proceedings of the ECCOMAS Jubilee Conference, ed. H. Mang, Wien

P. Wriggers, J. Nettingsmeier (2008): Homogenization and Multi-Scale Approaches for Contact Problems., 129-161

P. Wriggers, J. Nettingsmeier and I. Temizer (2008): On Multiscale Methods in Contact Mechanics., Proceedings of 6th GRACM 2008, Eds. D. Talaslidis, Thessaloniki

2007

C. Wellmann and P. Wriggers (2007): Homogenization of granular materials modeled through a three-dimensional Discrete Element Model, Proceedings of the First Seminar on The Mechanics of Multifunctional Materials, pp. 147-150

I. Temizer, Wriggers P. (2007): A database approach to homogenization., In J. Schroeder et al., editors, Proceedings of the First Seminar on the Mechanics ofMultifunctional Materials (May 7-10, 2007), Bad Honnef, pages 135-138

2006

B.-A. Lau, P. Wriggers, A. Schneider, R. Bader (2006): Finite-element transient calculation of a bell struck by a clapper, The Journal of the Acoustical Society of America, 119:3290

E.F.I. Boerner, D.S. Mueller-Hoeppe, S. Loehnert and P. Wriggers (2006): A Finite Element Formulation Based on the Theory of a Cosserat Point -- Extension to Ogden Material, Proceedings III European Conference on Computational Mechanics 2006

I. Temizer, P. Wriggers (2006): A numerical method for homogenization in isotropic and anisotropic nonlinear elasticity., In P. Gumbsch, editor, Multiscale Materials Modeling (September 18-22, 2006), Freiburg, pages 237-240

P. Wriggers (2006): Virtual Experiments in Engineering Material Design Processes., 3-7

2005

D. P. Boso, P. Litewka, B. A. Schrefler, P. Wriggers (2005): 3D Beam-to-beam Contact Within Coupled Electromechanical Fields: a Finite Element Model.

E. F. I. Boerner, P. Wriggers, M. B. Rubin (2005): A finite element formulation based on the theory of a Cosserat point, PAMM, 5, 379-380

H. Spiess, P. Wriggers (2005): Reduction Methods for FE Analysis in Nonlinear Structural Dynamics, PAMM, 5, 135-136

H. Spiess, P. Wriggers (2005): Reduction Methods in Finite Element Analysis of Nonlinear Structural Dynamics, Proceedings of the Fifth {EUROMECH} Nonlinear DynamicsConference (ENOC), Eindhoven

K. Krabbenhoft, A. Lyamin, S. Sloan, P. Wriggers (2005): Elastoplasticity by Mathematical Programming Methods.

L. Krstulovic-Opara and P. Wriggers (2005): A Three-dimensional Contact Element Based onthe Moving Friction Cone Approach and the Elliptical Coulomb Law, Proceedings of COMPLAS 8, eds. D. R. J. Owen and E. Onate, CIMNE, Barcelona

M. Hain, P. Wriggers (2005): A Micro-macro Approach for Cement-based Construction Materials, Proceedings of COMPLAS 8, eds. D. R. J. Owen and E. Onate, CIMNE,Barcelona

M. Hain, P. Wriggers (2005): Simulating the Microstructure of cement-based Construction Materials, PAMM, 5, 401-402

P. Wriggers, M. Hain, S. Löhnert (2005): Mikromechanische Modellierung von Beton, Jürgen Grünberg zum 60. Geburtstag, Herausgeber: M. Hansen and J. Lierse, Berichte des Instituts für Massivbau, No. 3, Fraunfofer IRB Verlag, Stuttgart

P. Wriggers, M. Siplivaya, I. Joukova, R. Slivin (2005): Intelligent Support of Engineering Analysis, AI-METH 2005 – Artificial Intelligence Methods

P. Wriggers, S. Löhnert, M. Hain (2005): Micro characterization of materials with microheterogeneous structure, Proceedings of COMPLAS 8, eds. D. R. J. Owen and E. Onate, CIMNE, Barcelona

S. Loehnert, P. Wriggers (2005): Aspects of computational homogenisation of microheterogeneous materials including decohesion at finite strains, PAMM, 5, 427-428

S.H. Reese, P. Wriggers (2005): On the Explicite Simulation of Concrete Cracking Using One Enriched Finite Element Method, Proceedings of COMPLAS 8, eds. D. R. J. Owen and E.Onate, CIMNE, Barcelona

2004

H. Spiess, B. Lau, P. Wriggers, A. Schneider, R. Bader, M. Wiggenhagen (2004): Analysis of Bell Vibrations.

K. A. Fischer, P. Wriggers (2004): Different weak FE-formulations for 2-D frictionless Large Deformation Contact based on the Mortar Method, PAMM, 4, 312-313

M. Hjiaj, Z.Q. Feng, K. Krabbenhoft and P. Wriggers (2004): A time-stepping algorithm for nonsmooth friction models, Proceedings of ECCOMAS, on CD

P. Wriggers, A. Rieger (2004): An adaptive method for large deformation thermo-mechanical problems with unilateral constraints.

P. Wriggers, G. Zavarise (2004): Computational Contact Mechanics.

2003

A. Rieger, O. Scherf and P. Wriggers (2003): Adaptive methods for contact problems, Errorcontrolled Adaptive Finite Elements in Solid Mechanics, ed. E. Stein, Wiley, Chichester, pp. 147 - 179

C. Hahn, P. Wriggers (2003): An Explicit Multi-Body Contact Algorithm, PAMM, 3, 280-281

D. Freßmann, P. Wriggers (2003): A Micro- Thermomechanical coupled Finite-Element Model for the Simulation of Particulate Cellular Solids at Finite Strains, PAMM, 3, 274-275

K. A. Fischer, P. Wriggers (2003): Development of a Contact Element for Finite Deformations using the Mortar Method, PAMM, 3, 272-273

P. Wriggers and A. Rieger (2003): Advances in Adaptive Methods for Thermo-Mechanical Contact Problems, Computer Methods in Mechanics 2003 in Gliwice, Poland, ed. A. Borkowski

P. Wriggers, K. Fischer and A. Rieger (2003): Recent Developments in Contact Mechanics, 4thEuropean LS-DYNA Users Conference in Ulm, ed. K. Schweizerhof, Dynamore

S. Loehnert, K. Tegeler, P. Wriggers, T. Raible (2003): A simple wrinkling algorithm for orthotropic membranes at finite deformations, Proceedings Textile Composites and inflatable Structures, Structural Membranes

S. Loehnert, P. Wriggers (2003): Homogenization of microheterogeneous materials considering interfacial delamination at finite strains., Proceedings VII International Conference on Computational Plasticity, COMPLAS

T. Raible, S. Loehnert, K. Tegeler and P. Wriggers (2003): Computation of wirnkling states in membranes, Textile composites and inflatable structures, eds. E. Onate and B. Kröplin,CIMNE, Barcelona

2002

C. Leppin, P. Wriggers (2002): An adaptive finite element method for discontinuous localization analysis.

D. Fressmann, P. Wriggers (2002): A Reduced Integration Scheme for the Analysis of Microheterogeneous Materials in Finite Elasticity.

K. Wiechmann, P. Wriggers (2002): Variational Design Sensitivity Analysis of Structures with Finite Thermo-Elastic-Plastic Deformations.

L. Krstulovic-Opara, P. Wriggers (2002): Convergence studies for 3D smooth frictional contact elements based on quartic Bezier surfaces., 371-378

L. Krstulovic-Opara, P. Wriggers (2002): A two-dimensional C^1-continuous contact element based on the moving friction cone description.

P. Litewka, P. Wriggers (2002): 3D beam-to-beam contact finite element.

P. Wriggers, K. Chavan (2002): Consistent Coupling of Beam and Shell Elements for Thermo-Mechanical Analysis.

T. Raible, D. Freßmann, R.L. Taylor, P. Wriggers (2002): Customization of GiD & FEAP for Scientific Applications.

2001

M. Andre, P. Wriggers, C. Bertram (2001): Simulation of effective rubber properties during cross-linking using a simple network model.

P. Wriggers, A. Bandeira, P. Pimenta (2001): Computation analysis of contact mechanics undergoing large 3d deformations.

2000

C. Boley, H. Brandl, R. Katzenbach, P. Wriggers, J. Giere (2000): Neues Stoffmodell für Hohlraumbauten im Salzgebirge., 51:25-44

J. Korelc, L. Krstulovic-Opara, P. Wriggers (2000): Tridimenzionalni kontaktni element z uporabo Bezierovih ploskev cetrtega reda., 215-222

L. Krstulovic-Opara, P. Wriggers (2000): Large step approach for the simple 2D and 3D frictional contact elements., 45-52

L. Krstulovic-Opara, P. Wriggers, J. Korelc (2000): Symbolically generated 3D smooth polynomial frictional contact element based on the quartic Bezier surfaces.

P. Wriggers (2000): Finite Element Methods for Rolling Contact., 411:85-162

P. Wriggers, C. S. Han, A. Rieger (2000): H-Adaptive finite element methods for contact problems., 117-141

1999

A. Haraldsson, P. Wriggers (1999): A Frictional Law for Soil-Concrete Contact based on a Numerical Model for the Microstructure., 2:333-344

H. Tschöpe, E. Onate, P. Wriggers (1999): The critical displacement method with a constitutive damage model.

J. Korelc, L. Krstulovic-Opara, P. Wriggers (1999): Development of 2D contact elements with C1-continuity., 127-134

J. Sansour, P. Wriggers, C. Sansour (1999): Geometric Exact Models, Symplectic and Energy/Momentum Methods, and Active Degrees of Freedom for the Dynamics of Shells and Rods.

M. Andre, P. Wriggers (1999): Computational Simulation of the Vulcanization Process in Rubber Profile Production.

O. Scherf, P. Wriggers (1999): An adaptive finite element method for large deformation frictional contact., 38:91-112

P. Wriggers (1999): Finite elements for thermo-mechanical contact and adaptive finite element analysis of contact problems., 179-246

P. Wriggers, A. Rieger (1999): Comparison of different error measures for adaptive finite element techniques applied to contact problems involving large elastic strains., 211 - 222

P. Wriggers, A. Rieger (1999): Adaptive Methods for Contact Problems, Recent Developments.

P. Wriggers, C. S. Han, A. Rieger (1999): h-Adaptive FE-Methods for Contact Problems.

P. Wriggers, L. Krstulovic-Opara, J. Korelc (1999): Development of 2D Smooth Polynomial Frictional Contact Element based on a Symbolic Approach.

S. Reese, P. Wriggers (1999): Modelling of Thermo-Mechanical Material Behaviour of Rubber-like Polymers - Micromechanical Motivation and Numerical Simulation.

S. Reese, P. Wriggers (1999): An Automatic Control Technique to avoid Hourglass Instabilities in Unstructured Meshes.

1998

C. Sansour, P. Wriggers, J. Sansour (1998): An Integration Scheme for the Nonlinear Dynamics which is independent of the Involved Nonlinearities.

P. Wriggers, A. Haraldsson (1998): Kontaktmodelle für die Interaktion Baugrund Tragwerk., 38:91-112

1997

C. Leppin, P. Wriggers (1997): Numerical Simulations of the Behaviour of Cohesionless Soil.

J. Korelc, P. Wriggers (1997): Symbolic Approach in Computational Mechanics.

M. Feucht, D. Gross, P. Wriggers (1997): A New Element Formulation for Nonlocal Damage Models.

P. Wriggers, O. Scherf (1997): Adaptive Methods for Contact Problems.

R. Eberlein, P. Wriggers (1997): Finite Element Formulations of five and six Parameter Shell Theories accounting for Finite Plasticity.

1996

C. Sansour, P. Wriggers, J. Sansour (1996): Formulation and Energy-Momentum Methods for the Nonlinear Dynamics of Geometric Exact Structures with a Nonlinear Configuration Space: Application to Chaotic and Large Overall Motion.

G.A. Holzapfel, R. Eberlein, P. Wriggers, H.W. Weizsäcker (1996): A continuum based framework for the finite element analysis of proximal arteries., 335-338

1995

G. Zavarise, P. Wriggers (1995): On Contact Geometrical Relationschips.

G. Zavarise, P. Wriggers (1995): Elastoplastic contact problems solved by the cross-constraint method.

P. Wriggers, O. Scherf (1995): An adaptive finite element technique for nonlinear contact problems.

P. Wriggers, O. Scherf (1995): An adaptive finite element method for elastoplastic contact problems.

P. Wriggers, S. Meynen (1995): Parallele Algorithmen und Hardware für Berechnungsverfahren des Ingenieurbaus.

1994

C. Leppin, P. Wriggers (1994): Numerische Simulation schnell laufender Risse in viskoplastischen Materialien., 93

G. Zavarise, B.A. Schrefler, P. Wriggers (1994): On Numerical Analysis of Thermomechanical Contact Problems.

P. Wriggers, O. Scherf, C. Carstensen (1994): Adaptive Techniques for the Contact of Elastic Bodies., 78-86

1993

P. Wriggers (1993): Kritische Wertung nichtlinearer Stabtheorien bei Anwendung auf baupraktische Aufgabenstellungen.

P. Wriggers, G. Zavarise (1993): Recent Trends in Computational Methods for Contact Problems.

1992

G. Zavarise, B.A. Schrefler, P. Wriggers (1992): Consistent Formulation for Thermomechanical Contact based on Microscopic Interface Laws.

P. Wriggers (1992): Entwicklungstendenzen bei nichtlinearen FE-Methoden.

P. Wriggers, C. Miehe (1992): Recent Advances in the Simulation of Thermomechanical Contact Precesses.

P. Wriggers, C. Miehe (1992): On the Treatment of Contact Contraints within Coupled Thermomechanical Analysis.

P. Wriggers, C. Miehe (1992): On Thermomechanical Contact within Large Deformation Problems.

P. Wriggers, C. Miehe (1992): Contact Constraints within Coupled Thermomechanical Analysis - A Finite Element Model.

U. Hueck, H.L. Schreyer, P. Wriggers (1992): The mothod of orthogonal projections for handling constraints with applications to incompressible four-node quadrilateral elements.

1991

G. Zavarise, P. Wriggers, E. Stein, B.A. Schrefler (1991): An Efficient Thermomechanically Coupled Contact Element based on Microscopic Physical Behaviour of Surfaces.

P. Wriggers, E. Stein (1991): Impact Problems in Structural Mechanics: Theoretical and Numerical Aspects.

W. Wagner, P. Wriggers (1991): The Computation of Bifurcation Points via Fold Curves.

1990

E. Stein, P. Wriggers (1990): Finite-Elemente-Methoden und ihre Absicherung in der Mathematik.

E. Stein, W. Wagner, P. Wriggers (1990): Numerical Procedures for the Computation of Singular Points and Postcritical Branches.

P. Wriggers, E. Stein, C. Miehe (1990): The Impact of Computer Aided Teaching in Lecturing Computational Mechanics.

P. Wriggers, N. Tarnow (1990): Interactive Control of Non-linear Finite Element Calculations by an Expert System.

P. Wriggers, W. Wagner (1990): Large Deformation Contact Problems of Axisymmetrical Membranes and Shells, A Finite Element Solution.

1989

E. Stein, P. Wriggers, T. vu Van (1989): Models of Friction, Finite-Element-Implementation and Application to Large Deformation Impact-Contact-Problems.

E. Stein, W. Wagner, P. Wriggers (1989): Grundlagen nichtlinearer Berechnungsverfahren in der Strukturmechanik.

P. Wriggers, C. Miehe, M. Kleiber, J.C. Simo (1989): On the Thermomechanical Treatment of Necking Problems, a Finite Element Solution.

P. Wriggers, F. Gruttmann (1989): Large deformations of thin shells: Theory and Finite-Element- Discretization, Analytical and Computational Models of Shells., 135-159

1988

C. Miehe, E. Stein, P. Wriggers (1988): A General Concept for Thermomechanical Coupling.

E. Stein, D. Bischoff, N. Müller-Hoppe, W. Wagner, P. Wriggers (1988): Five Lectures on Nonlinear Finite Element Methods.

E. Stein, W. Wagner, P. Wriggers (1988): Concepts of Modeling and Discretization of Elastic Shells for Nonlinear Finite Element Analysis.

P. Wriggers, W. Wagner (1988): Solution Methods for Stability Analysis.

P. Wriggers, W. Wagner (1988): A Solution Method for the Postcritical Analysis of Contact Problems.

1987

P. Wriggers (1987): On Consistent Tangent Matrices for Frictional Contact Problems.

P. Wriggers, T. vu Van, E. Stein (1987): Zur Berechnung von Stoßvorgängen bei Rahmentragwerken.

1986

E. Stein, W. Wagner, P. Wriggers (1986): Postbuckling Analysis of Stability Problems with Nonlinear Contact Constraints.

W. Wagner, P. Wriggers, E. Stein (1986): A Shear-Elastic Shell Theory and Finite-Element-Postbuckling Analysis including Contact.

1985

K.-D. Klee, E. Stein, P. Wriggers (1985): Traglastuntersuchungen ebener Stabtragwerke bei großen Verschiebungen und Verdrehungen.

P. Wriggers, J.C. Simo, R.L. Taylor (1985): Penalty and Augmented Lagrangian Formulations for Contact Problems.

1981

E. Stein, P. Wriggers (1981): Incremental Calculations of Frictional Impact-Contact Problems with Application to Elastic Rods and Shells.

Presentation

2017

A.-K. Krüger, S. Julmi, C. Klose, S. Besdo, H. J. Maier, P. Wriggers (2017): Simulation der Degradation schwammähnlicher Strukturen aus Magnesiumlegierungen als Knochenersatzmaterial, Jahrestagung der Deutschen Gesellschaft für Biomechanik 2017, Hannover, Germany, 29-31 March 2017

A.-K. Krüger, S. Julmi, C. Klose, S. Besdo, P. Wriggers  (2017): Simulation of the Change in Mechanical Properties of Degradable Bone Implants, 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry (GACM 2017), Stuttgart, Germany, 11-13 October 2017

D. Huang, C. Weißenfels, P. Wriggers (2017): Numerical Simulation of Contact using Optimal Transportation Meshfree (OTM) Method, 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2017), Weimar, Germany, 6-10 March 2017

D. Huang, C. Weißenfels, P. Wriggers (2017): Simulation of Ductile Damage and Fracture at Finite Strain by Optimal Transportation Meshfree (OTM) method, XIV International Conference on Computational Plasticity (COMPLAS 2017), Barcelona, Spain, 5-7 September 2017

H. Wessels, C. Weißenfels, P. Wriggers (2017): Metal Particle Melting Using Optimal Transportation Meshless Method, Berkeley/Stanford CompFest 2017, Berkeley, USA, April 8th 2017

H. Wessels, C. Weißenfels, P. Wriggers (2017): Metal Particle Melting for Powder Based Additive Manufacturing Using Optimal Transportation Meshfree Method, 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2017), Weimar, Germany, March 6-10, 2017

H. Wessels, C. Weißenfels, P. Wriggers, T. I. Zohdi (2017): Metal Particle Melting and Solidification for Powder Based Additive Manufacturing Using Optimal Transportation Meshfree Method, IUTAM/AMERIMECH Symposium on Computational Mechanics of Particle-Functionalized Fluid and Solid Materials for Additive Manufacturing and 3D Printing Processes, Berkeley, USA, May 30-31, 2017

H. Wessels, C. Weißenfels, P. Wriggers, T. I. Zohdi (2017): Melting and Solidification of Powder Based Additive Manufacturing Using Optimal Transportation Meshfree Method, Simulation for Additive Manufacturing, Munich, Germany, October 11-13, 2017

M. Baldrich, S. Löhnert, P. Wriggers (2017): Modelling the thermoplastic material bahaviour of a tailored formed joining zone on a microscopic length scale with focus on the steel component, 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2017), Weimar, Germany, 6-10 March 2017

M. Baldrich, S. Löhnert, P. Wriggers (2017): Modelling the thermoplastic material bahaviour of a tailored formed joining zone on a microscopic length scale, XIV International Conference on Computational Plasticity (COMPLAS 2017), Barcelona, Spain, 5-7 September 2017

M. Marino, D. Bianchi, G. Pontrelli, G. Vairo, P. Wriggers (2017): Analysis of arterial multiphysics via a novel chemo-mechano-biological model, 3rd Soft Tissue Modelling Workshop (07.06.17 - 09.06.17, Glasgow, UK)

M. Marino, D. Bianchi, G. Vairo, P. Wriggers (2017): Arterial physiopathological remodeling: a framework for investigating the role of molecular transport and multiscale constitutive response, 3rd International Conference on Biomedical Technology, ECCOMAS Thematic Conference (06.11.17 - 08.11.17, Hannover, Germany)

M. Marino, M. von Hoegen, J. Schröder, P. Wriggers (2017): Constitutive response and structure of soft biological tissues: direct and inverse identification of parameters , 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (6.03.2017 - 10.03.2017, Weimar, Germany)

M. Marino, P. Wriggers (2017): In silico assessment of individualized implants: a chemo-mechano-biological approach for arterial pathophysiology , Jahrestagung der BIOMEDIZINISCHEN TECHNIK und Dreiländertagung der MEDIZINISCHEN PHYSIK (10.09.17 - 13.09.17, Dresden, Germany)

M. Marino, P. Wriggers (2017): A chemo-mechano-biological approach for multiphysics arterial pathophysiology: from cell-cell signalling pathways to multiscale tissue mechanics , 10. Jahrestagung der Deutschen Gesellschaft für Biomechanik (29.03.17 - 31.03.17, Hannover, Germany)

M. Marino, P. Wriggers (2017): A novel finite-element multiscale formulation for microstructured soft materials with crimped fibers , 23rd Congress of the Italian Association of Theoretical and Applied Mechanics (04.09.17 - 07.09.17, Salerno, Italy)

M. Pezeshki, S. Löhnert, P. Wriggers (2017): 3D Fracture modeling by extended finite element method and gradient enhanced damage, 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2017), Weimar, Germany, 6-10 March 2017

M. Pezeshki, S. Löhnert, P.-A. Guidault, E. Baranger, P. Wriggers (2017): Dynamic brittle fracture by XFEM and gradient-enhanced damage, International Conference on Computational Fracture and Failure of Materials and Structures (CFRAC 2017), 14-16 June 2017, Nantes, France

T. Steiner, P. Wriggers (2017): A primal discontinuous Petrov-Galerkin Finite Element Method, 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry (GACM 2017), Stuttgart, Germany, 11-13 October 2017

T. Steiner, P. Wriggers, F. Hellwig, C. Carstensen (2017): A low-order discontinuous Petrov-Galerkin Finite Element Method, 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2017), Weimar, Germany, 6-10 March 2017

T. Steiner, P. Wriggers, F. Hellwig, C. Carstensen (2017): A low-order discontinuous Petrov-Galerkin Finite Element Method, Modern Finite Element Technologies (MFET 2017), Bad Honnef, Germany, 21-23 August 2017

W. T. Rust, P. Wriggers, B. Hudobivnik, B. D. Reddy  (2017): A Virtual Element Method for Large Deformation Contact , 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2017), 06-10 March 2017, Weimar, Germany

W.T. Rust, P. Wriggers, B. Hudobivnik, B.D. Reddy (2017): A Virtual Element Method for Large Deformation Contact, Polytopal Element Methods in Mathematics and Engineering (POEMS 2017), 5-7 July, Milano, Italy

W.T. Rust, P. Wriggers, B. Hudobivnik, B.D. Reddy (2017): A Virtual Element Method for Large Deformation Contact, Modern Finite Element Technologies (MFET 2017), 21-23 August, Bad Honnef, Germany

2016

A. B. Harish and P. Wriggers (2016): Towards a Multiscale Approach to Modeling Nanoparticle Reinforced Elastomers, Workshop on Multiscale Modeling and Model Reduction, Aachen, Germany (Jun, 2016)

M. Chaudry, C. Woitzik, C. Weißenfels, A. Düster, P. Wriggers (2016): DEM-FEM coupled numerical investigation of granular materials to increase crashworthiness of double-hull vessels, 87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2016), Braunschweig, Germany, 7-11 March 2016

P. Wagner, P. Wriggers, H. Clasen, C. Prange (2016): Validation of a multiscale FEM approach for elastomer friction on rough surfaces, 8th Contact Mechanics International Symposium (CMIS 2016), Warsaw, Poland, 11-13 May 2016

P. Wagner, P. Wriggers, H. Clasen, C. Prange (2016): Multiscale FEM approach for hysteresis friction and adhesion of rubber on rough surfaces, 7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), Crete, Greece, 5-10 June 2016

P. Wriggers (2016): Material Modeling based on Multiscale Analyis, University of Cape Town

P. Wriggers, J. Schroeder, and F. Auricchio (2016): Finite element formulations for large strains in anisotropic materials, keynote lecture, ECCOMAS 2016, Crete

Peter Wriggers, S. Zeller, S. Beese and S. Löhnert (2016): A Multiscale Approach for Modeling Thermoplastic Material Behaviour of Dual-Phase Steels - From Microscopic to Macroscopic Length Scale, Plenary Lecture at the World Congress of Computational Mechanics, WCCM & APCOM, Seoul, 2016

S. Zeller, S. Loehnert, P. Wriggers (2016): Modelling the Thermoplastic Material Behaviour of Dual-Phase Steels on a Microscopic Length Scale, 87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2016), Braunschweig, Germany, 7-11 March 2016

Steffen Beese, Stefan Loehnert and Peter Wriggers (2016): Modeling of fracture in polycrystalline materials with the XFEM, 7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), Crete, Greece, 5-10 June 2016

T. Steiner, P. Wriggers (2016): A discontinuous Galerkin Finite Element Method for linear elasticity using a mixed integration scheme, 7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), Crete, Greece, 5-10 June 2016

T. Steiner, P. Wriggers, C. Carstensen (2016): Two-dimensional discontinuous Galerkin & discontinuous Petrov Galerkin Method, 87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2016), Braunschweig, Germany, 7-11 March 2016

W.T. Rust, P. Wriggers, B.D. Reddy (2016): The Virtual Element Method for Large Deformation Contact , 7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), Crete, Greece, 5-10 June 2016

W.T. Rust, P.Wriggers, B.D. Reddy (2016): The Virtual Element Method and its application on adaptive mesh refinement , Special Workshop Multiscale Modeling of Heterogeneous Structures (MUMO) 2016, Dubrovnik, Croatia, September 21-23, 2016

2015

A. B. Harish and P. Wriggers (2015): Abrasive Wear: Towards a Multiscale Approach, 4th International Conference on Computational Contact Mechanics (ICCCM15), Hanover, Germany, 27-29 May 2015

A. B. Harish and P. Wriggers (2015): Abrasive Wear: Towards a Multiscale Approach, 26th Annual Robert J. Melosh Symposium, Durham, USA, 24-Apr-2015

Artsem Kunin, Stefan Loehnert and Peter Wriggers (2015): A multiscale projection method for the thermomechanical simulation of the interaction of microcracks with a macrocrack, X-DMS 2015, eXtended Discretization Methods, Ferrara, Italy, September 9-11, 2015

P. Wagner, P. Wriggers, C. Klapproth, C. Prange (2015): A multiscale contact homogenization approach for hysteresis friction of rubber on rough surfaces, 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2015), Lecce, Italy, 23-27 March 2015

P. Wagner, P. Wriggers, C. Klapproth, C. Prange (2015): Thermomechanical Multiscale FEM Approach for Sliding Elastomers on Rough Surfaces, 6th Edition of the International Conference on Computational Methods for Coupled Problems in Science and Engineering (Coupled Problems 2015), San Servolo, Venice, Italy, 18-20 May 2015

P. Wagner, P. Wriggers, C. Prange (2015): Thermomechanical Multiscale FEM Approach for Sliding Elastomers on Rough Surfaces, 4th International Conference on Computational Contact Mechanics (ICCCM15), Hanover, Germany, 27-29 May 2015

S. Yazdani, W.J.H. Rust, P. Wriggers (2015): An extended finite element model for the delamination analysis of composite laminates, 18th International Conference on Composite Structures (ICCS18), At Lisbon, Portugal

S. Zeller, S. Loehnert, P. Wriggers (2015): Modellierung der Temperaturentwicklung während der Blechmassivumformung unter Berücksichtigung der Mikrostruktur des Werkstoffes, Norddeutsches Mechanik-Kolloquium, Hannover, Germany

S. Zeller, S. Loehnert, P. Wriggers (2015): Modelling the Thermoplastic Material Behaviour of Dual-Phase Steels on a Microscopic Length Scale, GAMM 2015, Lecce, Italy

S. Zeller, S. Loehnert, P. Wriggers (2015): Modelling the Thermoplastic Material Behaviour of Dual-Phase Steels on a Microscopic Length Scale and Deducing Corollaries for Material Models on a Macroscopic Length Scale, COMPLAS 2015, Barcelona, Spain

Steffen Beese, Stefan Loehnert and Peter Wriggers (2015): 3D ductile crack propagation with the XFEM , 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2015), Lecce, Italy, 23-27 March 2015

Steffen Beese, Stefan Loehnert, Peter Wriggers (2015): Crack Propagation in poly crystalline materials, X-DMS 2015, eXtended Discretization Methods, Ferrara, Italy, September 9-11, 2015

W.T. Rust, P. Wriggers, B.D. Reddy (2015): Application of the virtual element method to non-conforming contact interfaces , 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2015), Lecce, Italy, 23-27 March 2015

W.T. Rust, P. Wriggers, B.D. Reddy (2015): Application of the virtual element method to non-conforming contact interfaces , 3rd Eccomas Young Investigators Conference, July 20-23, 2015, RWTH Aachen

W.T. Rust, P. Wriggers, B.D. Reddy  (2015): Application of the virtual element method to non-conforming contact interfaces , Thematic Conference on eXtended Discretization MethodS, September 9- 11, 2015, Ferrara

W.T. Rust, P. Wriggers, B.D. Reddy (2015): Application of the virtual element method to non-conforming contact interfaces, 8th International Congress of Croatian Society of Mechanics (8th ICCSM), 29 September - 3 October 2015, Opatija, Croatia

2014

A. B. Harish and P. Wriggers (2014): Multiscale-Multiphysics Modeling of Processes, Young Investigators Meet, Hannover, Germany, (Nov, 2014)

A. B. Harish and P. Wriggers (2014): Modeling Abrasive Wear: Towards and Multiscale Fracture Approach, 11th World Congress on Computational Mechanics (WCCM XI), Barcelona, Spain, 20-25 July 2014

A. B. Harish and P. Wriggers (2014): Multiscale Multiphysics Outlook to Modelling Abrasive Wear, 6th Contact Mechanics International Symposium (CMIS 2014), Abu Dhabi, United Arab Emirates, 03-05 February 2014

M. Anndif , P. Wriggers (2014): Reduced Order Model for Nonlinear Structural Mechanics, Workshop on Recent Trends and Future Developments in Computational Science and Engineering, March 26-28, 2014,Plön, Germany

P. Wagner, P. Wriggers, C. Klapproth (2014): A multiscale contact homogenization technique for rubber friction on rough surfaces, 7th Contact Mechanics International Symposium (CMIS 2014), Abu Dhabi, United Arab Emirates, 03-05 February 2014

P. Wagner, P. Wriggers, C. Klapproth, C. Prange (2014): Multiscale FEM for rubber friction on rough surfaces, 11th World Congress on Computational Mechanics (WCCM XI), Barcelona, Spain, 20-25 July 2014

P. Wagner, P. Wriggers, C. Klapproth, C. Prange (2014): Multiscale FEM approach for rubber friction on rough rigid surfaces, 14th European Mechanics of Materials Conference (EMMC-14), Gothenburg, Sweden, 27-29 August 2014

S. Zeller, S. Loehnert, P. Wriggers (2014): Modelling the temperature development during sheet-bulk-metal forming considering the microstructure of the material, GAMM 2014, Erlangen, Germany

2013

A. B. Harish and P. Wriggers (2013): Formulation of 3D Nonlocal Cohesive Zone Model for Finite Thickness Interfaces: Application to Crack Modeling in Filled Elastomeric Materials, 3rd International Conference on Computational Contact Mechanics- ICCCM, Lecce, Italy, 10- 12 July 2013

A. B. Harish and P. Wriggers (2013): Micromechanical Model for Mullins Effect Induced Anisotropic Damage in Filled Elastomers, 12th US National Congress on Computational Mechanics (USNCCM 12), July 22-25, Raleigh, USA

A. B. Harish and P. Wriggers (2013): Computational Implementation of Finite Thickness Nonlocal Cohesive Zone Element for Crack Propagation in Filled Elastomers, German Association for Computational Mechanics Symposium, Hamburg, Germany, 02-04 Oct (2013) (Note: The work was also presented as a poster & was awarded the best poster award)

C. Prange, S. Loehnert, P. Wriggers (2013): Model adaptivity within a 3D multiscale context for XFEM for cracks, GAMM 84rd Annual Meeting, Novi Sad, 18. - 22. März 2013

C. Prange, S.Loehnert, P. Wriggers (2013): Discretization and model adaptivity for the multiscale XFEM simulation of arbitrary crack geometries using unstructured meshes, Third International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Prag, 05. - 07. Juni 2013

H. Clasen, C. B. Hirschberger, J. Korelc, P. Wriggers (2013): FE²-homogenization of micromorphic elasto-plastic materials, 12th International Conference on Computational Plasticity (COMPLAS XII), Barcelona, 3-5 September 2013

J.-H. Dobberstein and P. Wriggers (2013): Methods to stabilize demolding simulations, 3rd International Conference on Computational Contact Mechanics, Lecce, Italy, 10-12 July 2013

M. Anndif, P.Wriggers (2013): Model Reduction by using Dynamic-POD, 2nd International Workshop on Reduced Basis, POD and PGD model , November 3-6, 2013, BLOIS CASTLE, france.

M. Weidling, S. Besdo, T. Schilling, M. Bauer, Fr.-W. Bach, H. J. Maier, A. Haverich, P. Wriggers, T. Hassel  (2013): Development of magnesium alloy scaffolds to support biological myocardial grafts - A finite element investigation, International Conference on Biomedical Technology. European Community on Computational Methods in Applied Sciences (ECCOMAS). Hannover, 20.-22.11.2013.

M. Weidling, S. Besdo, T. Schilling, M. Bauer, T. Hassel, A. Haverich, P. Wriggers (2013): Finite element simulation of myocardial stabilising structures and development of new designs, BMT 2013. 3-Ländertagung der Fachgesellschaften ÖGBMT/SGBT/DGBMT. Graz, 19.-21.09.2013

N. Hajibeik, L. de Lorenzis, P. Wriggers (2013): Isogeometric Analysis of Delamination in Composites, Third International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Prague, 05. - 07. Juni 2013

N. Hajibeik, L. de Lorenzis, P. Wriggers (2013): Isogeometric Analysis of Mixed–Mode Delamination in Composites, 3rd International Conference on Computational Contact Mechanics- ICCCM, Lecce, Italy, 10- 12 July 2013

S. Zeller, S. Loehnert, P. Wriggers (2013): Modelling the temperature development during sheet-bulk-metal forming using material isomorphism, GAMM 2013, Novi Sad, Serbia

S. Zeller, S. Loehnert, P. Wriggers (2013): Modelling the temperature development during sheet-bulk-metal forming using material isomorphism, COMPLAS 2013, Barcelona, Spain

2012

C. Prange, S. Loehnert, P. Wriggers (2012): Recovery based error estimation for 3D multiscale computations within the XFEM for cracks, GAMM 83rd Annual Meeting, Darmstadt, 26-30 March 2012

C. Prange, S. Loehnert, P. Wriggers (2012): Discretisation error estimation and model adaptivity within 3D multiscale XFEM for cracks, European Solid Mechanics Conference, Graz, 9. - 13. Juli 2012

E. Lehmann, S. Loehnert, P. Wriggers (2012): About the Microstructural Effects of Polycrystalline Materials and their Macroscopic Representation at Finite Deformation, GAMM 83rd Annual Meeting, Darmstadt, 26-30 March 2012

E. Lehmann, S. Loehnert, P. Wriggers (2012): Towards an Effective Material Model for Elastoplastic Polycrystalline Materials through Homogenisation, 8th European Solid Mechanics Conference, Graz, 9-13 July 2012

E. Lehmann, S. Loehnert, P. Wriggers (2012): Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformations, 6th ECCOMAS Conference, Vienna, 10-14 September. 2012

E. Lehmann, S. Schmaltz, D. Faßmann, S. Germain, C. Weber, S. Löhnert, M. Schaper, Fr.-W. Bach, P. Steinmann, K. Willner, P. Wriggers (2012): Material model identification for DC04 based on the numerical modelling of the polycrystalline microstructure and experimental data, 15th ESAFORM Conference, Erlangen, 14-16 March, 2012

M. Paggi, E. Lehmann, C. Weber, A. Carpinteri, P. Wriggers (2012): 3D vs. 2D Modelling of Cracking and Plasticity in Polycrystalline Materials, 10th World Congress on Computational Mechanics, Sao Paulo, 3-13 July, 2012

N. Hajibeik, I. Temizer, S. Löhnert, P. Wriggers (2012): Scale adaptivity for a multiscale analysis of composite substructures, 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Vienna, Austria, 10-14 September 2012

2011

C. B. Hirschberger, H. Clasen, Joze Korelc and P. Wriggers (2011): Automation of computational homogenization: consistent macro linearization for dissipative microstructures , ECCOMAS Special Interest Conference on Trends and Interests in Computational Mechanics 2011, 12–14 September 2011, Padua

C. Hoppe, S. Loehnert, P. Wriggers (2011): Recovery based error estimation in 2D and 3D for the extended finite element analysis of cracks, GAMM 82nd Annual Meeting, Graz, 18-21 April 2011

C. Hoppe, S. Loehnert, P. Wriggers (2011): Twoscale crack calculation with a recovery based error estimation technique for the discretization error in 3D, USNCCM 11th U.S. National Congress on Computational Mechanics, Minneapolis, 25-28 July 2011

C. Hoppe, S. Loehnert, P. Wriggers (2011): Recovery based error estimation for the discretization error of twoscale crack calculations, XFEM, ECCOMAS thematic conference, Cardiff, 29 June - 1 July 2011

C. Weißenfels and P. Wriggers (2011): Numerical Simulation of Soil-Structure Interactions using Projected Friction Laws, 2nd International Conference on Computational Contact Mechanics (ICCCM), Hannover (Germany), June 15 - June 17, 2011

E. Lehmann, S. Loehnert, P. Wriggers (2011): Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformation, GAMM 82nd Annual Meeting, Graz, 18-21 April 2011

E. Lehmann, S. Loehnert, P. Wriggers (2011): Towards the Effective Behaviour of Polycrystalline Materials for Sheet Bulk Metal Forming Processes, ESAFORM, Belfast, 27-29 April 2011

E. Lehmann, S. Loehnert, P. Wriggers (2011): Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformation, 2nd International Conference on Material Modelling, Paris, 31 August - 02 September 2011

E. Lehmann, S. Loehnert, P. Wriggers (2011): Towards the Effective Behaviour of Polycrystalline Microstructures at Finite Strains, COMPLAS XI., Barcelona, 07-09 September 2011

J. Korelc, P. Wriggers, C. B. Hirschberger (2011): Automation of FE2 multi-scale method, 11th US National Congress on Computational Mechanics, Minneapolis, USA, 25.–28.07.2011.

J.-H. Dobberstein, M. Wangenheim, F. Schmerwitz, H. Lind, P. Wriggers, B. Wies (2011): Simulation of the Friction Behavior of Rubber Compounds on Real Road Surfaces, 2nd International Conference on Computational Contact Mechanics (ICCCM 2011), Hannover, 15-17 June 2011

N. Hajibeik, I, Temizer, P. Wriggers (2011): Adaptive Multi-scale Analysis in Composites, University of Tehran, Iran, December 2011

N. Hajibeik, I, Temizer, S. Löhnert, P. Wriggers (2011): Adaptive Multi-scale Failure Analysis based on Error Estimation, GAMM 82nd Annual Meeting Graz, 18-21 April 2011

N. Hajibeik, I, Temizer, S. Löhnert, P. Wriggers (2011): Adaptive Multi-scale Failure Analysis based on Error Estimation, 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites, 21-23th September 2011, Hannover, Germany

2010

C. Hoppe, S. Loehnert, P. Wriggers, E. Stein (2010): Error estimation within the extended finite element analysis of cracks, GAMM 81st Annual Meeting, Karlsruhe, 22-26 March 2010

C. Hoppe, S. Loehnert, P. Wriggers, E. Stein (2010): Error estimation within the extended finite element analysis of cracks, ECCM 4th European Conference on Computational Mechanics, Paris, 16-21 May 2010

C. Weißenfels and P. Wriggers (2010): Numerical Simulation of Soil-Structure Interactions using Projected Friction Laws, 4th European Conference on Computational Mechanics (ECCM), Paris (France), May 16 - May 21, 2010

C. Weißenfels and P. Wriggers (2010): Numerical Modeling of Soil-Structure Interactions using Projected Friction Laws, 9th World Congress on Computational Mechanics (WCCM), Sydney (Australia), July 19 - July 23, 2010

E. Lehmann et al. (2010): Identifikation eines Materialmodells für den DC04 basierend auf der numerischen Modellierung der polykristallinen Mikrostruktur und experimentellen Daten, 1. Workshop Blechmassivumformung, Erlangen, 13-14 October 2010

E. Lehmann, S. Loehnert, P. Wriggers (2010): Modelling Metals at Finite Deformation, GAMM 81st Annual Meeting, Karlsruhe, 22-26 March 2010

J.-H. Dobberstein, R. A. Sauer, P. Wriggers, F. Schmerwitz, M. Wangenheim (2010): An effective computational contact model for hysteretic friction on rough surfaces, GAMM 81st Annual Meeting, Karlsruhe, 22-26 March 2010

2009

C. Weißenfels and P. Wriggers (2009): Numerical Modeling of Electrical Contacts, 13th Congress on the Mathematics of Finite Elements and Applications (MAFELAB), Brunel (United Kingdom), June 9 - June 12, 2009

C. Weißenfels and P. Wriggers (2009): Computational Modeling of Soil-Structure Interactions, 1st International Conference on Computational Contact Mechanics (ICCCM), Lecce (Italy), September 16 - September 18, 2009

C. Weißenfels and P. Wriggers (2009): Numerical Modeling of Friction Laws fro Soil-Structure Interations , 3rd GACM Colloqium on Computational Mechanics, Hannover (Germany), September 21 - September 23, 2009

2008

C. Weißenfels and P. Wriggers (2008): A Finite Element Algorithm for Electromechanical Contact Problems, 79st Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Bremen (Germany), March 31 - April 4, 2008

C. Weißenfels and P. Wriggers (2008): Numerical Treatment of Coupled Electro- Thermo- Mechanical Effects in Contact Problems, 8th World Congress on Computational Mechanics (WCCM), Venice (Italy) , June 30 - July 5, 2008

Technical Report

1999

R. L. Taylor, P. Wriggers (1999): Smooth surface discretization for large deformation frictionless contact.

1996

O. Scherf, G. Bugeda, E. Onate, P. Wriggers (1996): Investigation of impact problems via adaptive finite element methods.

P. Wriggers, M. Imhof (1996): Thermo-Kontakt.

1995

J. Korelc, P. Wriggers (1995): Improved enhanced strain four node element with Taylor expansion of shape functions.

M. Küssner, P. Wriggers, L. Bernspang, A. Samuelson (1995): Mixed methods in finite element plasticity.

O. Scherf, P. Wriggers (1995): Adaptive Methoden für Kontaktprobleme.

S. Heimer, C. Leppin, D. Gross, P. Wriggers (1995): Untersuchung des bruchdynamischen Verhaltens von Rissen in viskoplastischen Materialien.

1994

P. Wriggers, S. Meynen (1994): Tätigkeitsbericht Darmstadt zum Forschungsvorhaben Wr 19/5-1 Parallele Iterationsverfahren.

1992

P. Wriggers, M. Imhof (1992): Thermo-Kontakt.

1989

E. Stein, K.-D. Klee, P. Wriggers, F. Gadiel (1989): Rechnergestützte Traglastberechnung von Stahlbetonplattenbalken und -rahmen.

E. Stein, P. Wriggers, T. Wedemeier, T. vu Van (1989): Materialgesetze zum Verhalten von Betonkonstruktionen bei harten Stößen.

1988

P. Wriggers (1988): Konsistente Linearisierungen in der Kontinuumsmechanik und ihre Anwendung auf die Finite-Element-Methode.

1986

E. Stein, P. Wriggers, T. vu Van (1986): Nichtlineare Stoß- und Kontaktprobleme und ihre inkrementelle numerische Behandlung.

1985

P. Wriggers (1985): Die Behandlung der Inkompressibilität mit gemischten finiten Elementen oder der selektiv- reduzierten Integration.

1984

Mazzucki, Griebenow, Klee, Rose, Stein, Vogel, Wriggers (1984): Entwurf einer Richtlinie für das Aufstellen und Prüfen von elektronischen Standsicherheitsnachweisen.

P. Wriggers (1984): Thermomechanischer Kontakt.

P. Wriggers, B. Nour-Omid (1984): Solution Methods for Contact Problems.

1981

P. Wriggers (1981): Zur Berechnung von Kontakt- und Stoßproblemen elastischer Körper mit Hilfe der Finite-Element-Methode.

1976

P. Wriggers, J. Grüne, U. Sparboom (1976): Voruntersuchungen zum Schwingungsverhalten des Grossen Wellenkanals, Teilprojekt C1.

2017

M. Marino, M.I. Converse, P. Wriggers, K.L. Monson  (2017): Damage of arterial tissues: a structurally-motivated model based on direct measures of collagen unfolding , 23rd Congress of the European Society of Biomechanics (02.07.17 - 05.07.17, Seville, Spain)

2016

S. Zeller, S. Loehnert, P. Wriggers (2016): Modelling the Thermoplastic Material Behaviour of Dual-Phase Steels on a Microscopic and Macroscopic Length Scale, 7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), Crete, Greece, 5-10 June 2016