Logo Leibniz Universität Hannover
Logo: Institut für Kontinuumsmechanik/Leibniz Universität Hannover
Logo Leibniz Universität Hannover
Logo: Institut für Kontinuumsmechanik/Leibniz Universität Hannover
  • Zielgruppen
  • Suche
 

Mehrskalenmodellierung/ Mehrfeldprobleme

Micro-Mechanically Based Modeling of Degradation of Composite Materials with Random Microstructure

Bild zum Projekt Micro-Mechanically Based Modeling of Degradation of Composite Materials with Random Microstructure

Leitung:

Prof. P. Wriggers, Dr. F. Daghia

Bearbeitung:

Dipl.-Ing. V. Krupennikova

Förderung durch:

DFG (Graduiertenkolleg 1627)

Kurzbeschreibung:

High-performance composite materials, such as carbon-fiber-reinforced polymers, serve as construction materials in various lightweight structures, subjected to high loads. Severe environmental conditions, such as oxidative atmosphere, affect the material microstructure and properties and thus induce material degradation which can lead to premature failure under mechanical loads. There is experimental evidence of a microstructure dependency of the material degradation. The goal of the work in progress is to develop a framework for analysis of the degradation of CFRP upon oxidation which accounts for the random distribution of the phases.

 

| details |

 

Entropic approach to modeling Mullins effect in non-crystallizing filled elastomers

Bild zum Projekt Entropic approach to modeling Mullins effect in non-crystallizing filled elastomers

Leitung:

P. Wriggers, J. J. Rimoli

Bearbeitung:

A. B. Harish, A. B. Shah

Kurzbeschreibung:

The work was done in collaboration with Mrs. Aarohi B. Shah and Dr. Julian J Rimoli of School of Aerospace Engineering, Georgia Tech, USA. In this work, we investigate non-crystallizing nanoparticle-reinforced polymers. The effects of the interface rubber between elastomeric matrix and filler particles and its alteration are investigated as a primary cause of Mullins and Payne effect.

 

| details |

 

Towards multiscale modeling of Abrasive wear

Bild zum Projekt Towards multiscale modeling of Abrasive wear

Leitung:

P. Wriggers

Bearbeitung:

A. B. Harish

Kurzbeschreibung:

The work is motivated towards understanding wear as a multiscale-multiphysics approach. A 3D framework is developed to simulate cracks propagation in a microstructure due to contact loading to eventually predict wear trends in filled elastomeric compounds.

 

| details |

 

Multi-Fluid Simulations for High Density Ratios

Bild zum Projekt Multi-Fluid Simulations for High Density Ratios

Leitung:

P. Wriggers, B. Avci

Bearbeitung:

J.-P. Fürstenau

Kurzbeschreibung:

Although the contact between fluids or gases of different densities is a common event in nature, like the interaction of water and air, the simulation of multiple fluids often comes along with numerous problems. With the Lagrangian description of continuous fluids in terms of the Smoothed Particle Hydrodynamics (SPH) method multi-fluid interactions within the particle scale can simulated. Nevertheless with the standard SPH algorithms multi-fluid problems can not be solved because of the density jumps at the interfaces. Within the project the state of the art of current multi-fluid approaches are compared and evaluated to develop appropriate methods for the simulation of multi-fluid systems with high density ratios.

 

| details |

 

Homogenization procedures for coupled thermo-chemo-mechanical problems

Bild zum Projekt Homogenization procedures for coupled thermo-chemo-mechanical problems

Leitung:

P. Wriggers, E. Baranger

Bearbeitung:

Jin Man Mok

Kurzbeschreibung:

In order to understand processes of continuum damage mechanics it is necessary to investigate thermo-chemo-mechanical coupled processes at micro scale. However for engineering purposes it is still necessary to be able to model these processes at macro scale, especially when large structures have to be designed. Thus a homogenization procedure or a FE^2 framework is necessary to transform the relation, describing the coupled thermo-chemo-mechanical response at micro scale to the macro scale. The related equations and procedures have to be developed and implemented in a finite element software system.

 

| details |

 

Direct Numerical Simulation of Multiphase Flows

Bild zum Projekt Direct Numerical Simulation of Multiphase Flows

Leitung:

P. Wriggers

Bearbeitung:

B. Avci

Kurzbeschreibung:

Multiphase flows consisting of a continuous fluid phase and a dispersed phase of macroscopic particles are present in many engineering applications. In general, a main task in the study of the particle-laden fluid flow of an application is to make predictions about the system's nature for various boundary conditions, since, depending on the volume fraction and mass concentration of the dispersed phase a fluid-particle system shows quite different flow properties. Unfortunately, often it is impossible to investigate such a system experimentally in detail or even at all. An option to capture and to predict its properties is performing a direct numerical simulation of the particulate fluid. For this purpose, an efficient approach is developed in this project by coupling the discrete element method and finite element method.

 

| details |

 

Multiscale Method for Hydro-Chemo-Thermo-Mechanics Coupling due to Alkali Silica Reaction in Concrete

Bild zum Projekt Multiscale Method for Hydro-Chemo-Thermo-Mechanics Coupling due to Alkali Silica Reaction in Concrete

Leitung:

P. Wriggers

Bearbeitung:

T. Wu

Kurzbeschreibung:

Alkali Silica Reaction(ASR) is one of most determinant reasons leading to the deterioration of concrete structures, which can be ascribed to the expansion of gel produced by ASR in the microstructural level of concrete. The challenge in the modeling of ASR is due to the necessity to take into account the presence of heterogeneities and physical processes distributed over multiple length scales. With increasing computation power and the tomography scan technology, it can be implemented by numerical simulation . In this contribution, 3D multiscale hydro-chemo-thermal-mechanical coupling based on a staggered method is demonstrated, which explicitly describes the damage evolution originating from the chemical reaction in the microscale and the dependence on environmental factors.

 

| details |

 

Design and Control of Additive Manufacturing Processes for Medical Silicone

 

Bearbeitung:

M.Sc. Philipp Hartmann

 

| details |

 

High Performance Computing of Stereolithography Processes

 

Bearbeitung:

M.Sc. Sandeep Kumar

 

| details |

 

Improved Frictional Models for Pile Installations

 

Bearbeitung:

M.Sc. Ajay Harish

 

| details |

 

A 3D CAD/CAE integration using isogeometric symmetric Galerkin boundary element method