Logo Leibniz Universität Hannover
Logo: Institut für Kontinuumsmechanik/Leibniz Universität Hannover
Logo Leibniz Universität Hannover
Logo: Institut für Kontinuumsmechanik/Leibniz Universität Hannover
  • Zielgruppen
  • Suche
 

Abgeschlossene Forschungsprojekte

Kontaktmechanik

Mutiscale FEM approach for rubber friction on rough surfaces

Bild zum Projekt Mutiscale FEM approach for rubber friction on rough surfaces

Leitung:

P. Wriggers

Bearbeitung:

P. Wagner

Kurzbeschreibung:

Understanding the frictional behaviour of elastomers on rough surfaces is of high practical importance in many industrial applications. For example the traction of a tire is directly linked to the material properties of the considered elastomer and the surface conditions of the road track. One goal of our studies is to gain a deeper understanding of the underlying contact physics at all length scales. Another aim is to determine a macroscopic coefficient of friction for varying material and surface properties and to validate the results with experimental data.

 

| details |

 

Analysis of local friction between rubber and dry and wet surfaces

Bild zum Projekt Analysis of local friction between rubber and dry and wet surfaces

Leitung:

P. Wriggers, R. A. Sauer

Bearbeitung:

J. Dobberstein

Kurzbeschreibung:

A prediction of the friction behavior of a rubber compound sliding over a road surface is an important topic in tire industry. Within this project the parameters which mainly influence the friction between a single tread block and a rough surface are investigated. The relevant physical mechanism of contact between a tread block and a rough surface, both wet or dry has to be understood. To validate the model a large number of test rigs is investigated at the Institute of Dynamics and Vibration Research (IDS).

 

| details |

 

Coupled Contact of Lubricated Contact

 

Leitung:

P. Wriggers

Bearbeitung:

M. Budt

Kurzbeschreibung:

In many engineering applications fluid lubricants are used to separate two solid bodies that rub against one another to minimize friction. Such devices are referred to as hydrodynamic bearings. There exist a large variety of bearings for translational and rotational movement. For engineers designing such bearing, computational methods can deliver useful information on its performance characteristics prior to its manufacturing. Within this project a three-dimensional finite element model is developed, that describes lubricated contact between two bodies with rough surfaces.

 

 

Contiuum Mechanical Modelling of Self-Cleaning Surface Mechanisms

 

Leitung:

R. A. Sauer

Bearbeitung:

M.Osman

Kurzbeschreibung:

Some biological surfaces, like several plant leaves, exhibit remarkable self cleaning mechanism. These are called hydrophobic surfaces, where the water does not coat the surface but rather forms small droplets which then roll-off easily on inclined surfaces and sweep foreign pollutants, like dirt or germ particles, away from the surface. A continuum mechanical model suitable for computational multiscale analysis is therefore required for describing the interaction between the water droplet, the pollutant particle and the substrate surface. This model provides better understanding of basic droplet-substrate interaction characteristics such as contact angle, roll off angle and droplet deformation due to the microstructure of the substrate. The surface self-cleaning capabilities can be therefore improved by optimizing the artificial surface microstructure.

 

| details |

 

Frictional contact of elastomer materials on rough rigid surfaces

 

Leitung:

P. Wriggers

Bearbeitung:

J. Reinelt

Kurzbeschreibung:

The purpose of this work is the derivation of a friction law for rubber materials on rough tracks by numerical investigations. Rubber friction includes a number of influences like hysteresis due to material damping, adhesional effects or thermomechanical coupling.

 

| details |

 

Materialmodellierung

Dynamic crack propagation using the XFEM

 

Leitung:

P. Wriggers, S. Löhnert

Bearbeitung:

D. Nolte

Kurzbeschreibung:

Imperfections in composite materials can occur at interfaces but also within the matrix material, particles or fibers. These imperfections often lead to cracks and thus are responsible for degradation and failure of these heterogeneous materials. In this project the attention turns to the dynamic crack propagation. Therefore a numerical approach by using the eXtended Finite Element Method (XFEM) to describe the problem within heterogeneous materials will be developed. The XFEM has proven to be adequate to handle cracks and heterogeneities in a precise geometrical and numerical framework.

 

| details |

 

Mikromechanische Modellierung von inelastischen Korngrenzeneffekten in polykristallinen Materialien

Bild zum Projekt Mikromechanische Modellierung von inelastischen Korngrenzeneffekten in polykristallinen Materialien

Leitung:

B. Hirschberger

Bearbeitung:

H. Clasen

Laufzeit:

1 Jahr

Förderung durch:

Leibniz Universität Hannover im Programm "Wege in die Forschung II"

Kurzbeschreibung:

In diesem Projekt soll das Verhalten polykristalliner Materialien mittels versetzungsbasierter Kristallplastizität untersucht und vorhergesagt werden. Ziel der Arbeit ist es, ein besseres Verständnis mikroskopisch nichtlokalen Verhaltens zu erlangen und geeignete Modelle für die Vorhersage der inelastischen Materialantwort zu entwickeln, die beispielsweise bei Strukturen in der Mikrosystemtechnik besonders relevant werden.

 

| details |

 

ADAPTIVE MULTISCALE MODELING AND ANALYSIS OF HETEROGENEOUS MATERIALS

Bild zum Projekt ADAPTIVE MULTISCALE MODELING AND ANALYSIS OF HETEROGENEOUS MATERIALS

Leitung:

P. Wriggers, I. Temizer

Kurzbeschreibung:

Accurate computational analyses of a composite structure requires multiple levels of resolution: (i) a region where effective elastic properties are employed, (ii) a region where embedded micro-macro problems are solved, and (iii) a region where explicit microstructural evaluation is required. Development of such computational schemes for the adaptive multiscale analysis of heterogeneous materials is the main purpose of this project.

 

| details |

 

FAILURE ANALYSIS - ERROR ESTIMATION FOR MULTISCALE METHODS

Bild zum Projekt FAILURE ANALYSIS - ERROR ESTIMATION FOR MULTISCALE METHODS

Leitung:

P. Wriggers

Bearbeitung:

N. Hajibeik

Kurzbeschreibung:

This project is concerned with the development of tools for error-estimation based adaptive multiscale failure analysis. In order to enable a more accurate mechanical analysis of composite aircraft substructures, existing discretisation error estimators will be improved to be used as indicators for mesh refinement. Additionally, physical error estimators will be developed to identify regions where higher-order material modelling is required.

 

| details |

 

DEVELOPMENT OF A MATERIAL MODEL FOR METAL SHEETS AT FINITE DEFORMATION

Bild zum Projekt DEVELOPMENT OF A MATERIAL MODEL FOR METAL SHEETS AT FINITE DEFORMATION

Leitung:

P. Wriggers, S. Löhnert

Bearbeitung:

E. Lehmann, S. Zeller

Kurzbeschreibung:

Technical procedures claim an improved material model for the simulation of metal forming processes. An effective, anisotropic elastoplastic material model for the macroscopic material behaviour for sheet metals is developed for further usage in commercial finite element programs.

 

| details |

 

Simulating the microstructure of cement-based construction materials

 

Leitung:

P. Wriggers, S. Löhnert

Bearbeitung:

N. Dabagh

Kurzbeschreibung:

In this thesis three-dimensional computational homogenization of hardened cement paste (HCP) including micro-structural damage due to frost is introduced. Based on a computer-tomography at a resolution of 1µm a finite-element model of HCP is developed with different elastic and inelastic constitutive equations for the three parts unhydrated residual clinker, pores, and hydration products.

 

| details |

 

Einfluss inelastischer Effekte auf die Reibung in zyklischen Prozessen

 

Leitung:

D. Besdo

Kurzbeschreibung:

Bei der Modellierung der Polreibung von Reifen ist eine große Anzahl einzelner Effekte zu berücksichtigen, insbesondere, dass sich Gummi mit ursprünglich einheitlichem Ausgangszustand nach einiger Verformung von Ort zu Ort sehr unterschiedlich verhalten kann. Die Ursache ist, dass die so genannte Gummi-Elastizität sehr beträchtliche inelastische Anteile aufweist, die von den vorangegangenen Lastzyklen, insbesondere von früheren Verformungsmaxima signifikant abhängen (Mullins-Effekt). Somit ist bei einer genauen Modellierung des Rollkontaktes unbedingt die Heterogenität des Vor-Verformungszustandes und ihr Einfluss auf die inelastischen Effekte zu beachten.

 

| details |

 

Mehrskalenmodellierung/ Mehrfeldprobleme

RAMWASS - Integrated Decision Support System for Risk Assessment and Management

Bild zum Projekt RAMWASS - Integrated Decision Support System for Risk Assessment and Management

Leitung:

P. Wriggers

Bearbeitung:

B. Avci

Kurzbeschreibung:

The objective of the EU-project RAMWASS is to develop and validate a new decision support system (DSS) for the risk assessment and management for the prevention and/or reduction of the negative impacts caused by human activities on the water/sediment/soil system at river basin scale in fluvial ecosystems.

 

| details |

 

Numerical modeling of electrical contacts

Bild zum Projekt Numerical modeling of electrical contacts

Leitung:

P. Wriggers

Bearbeitung:

C. Weißenfels

Kurzbeschreibung:

The focus of this work is the investigation of the behavior in electrical contacts, where electrical, thermal and mechanical fields are coupled. Specifically, theoretical constitutive models for the electrical conductance and electrical wear phenomena are developed and implemented in a three dimensional finite element setting. Also a new relation for wear is proposed, where the amount of wear is coupled to the dissipation arising at the contact interface.

 

| details |

 

MULTIPHYSICS COMPUTATIONAL HOMOGENIZATION METHODOLOGIES

Bild zum Projekt MULTIPHYSICS COMPUTATIONAL HOMOGENIZATION METHODOLOGIES

Leitung:

P. Wriggers, I. Temizer

Kurzbeschreibung:

Computational homogenization techniques that are amenable to a multiscale implementation are being developed for multiphysics problems at the finite deformation regime. Applications include the estimation of the contact conductance for rough interfaces and the modeling of the coupled thermomechanical response of heterogeneous materials.

 

| details |

 

Biomedizintechnik

Advanced multiscale computational mechanics for physiopathological behavior analysis of tissues and organs

Bild zum Projekt Advanced multiscale computational mechanics for physiopathological behavior analysis of tissues and organs

Leitung:

P. Wriggers, M. Marino

Förderung durch:

Alexander von Humboldt-Stiftung

Kurzbeschreibung:

The physiological functionalities of large biological structures are highly affected by the mechanics of living tissues which is, in turn, related to microstructural arrangement of histological constituents and biochemical environment at nanoscale. Present research activity aims to develop a novel tissue multiscale description, including also inelastic mechanisms, coupled with an advanced computational formulation under finite strain and large-displacement assumptions. As a result, an innovative in-silico tool for simulation of organs and large biological structures will be developed, allowing to predict pathology-related damage or pharmacological-related healing and providing novel diagnostic and clinical indications for highly patient-specific medical treatments.

 

| details |

 

Bruchmechanik/ XFEM

Dynamic crack propagation using the XFEM

 

Leitung:

P. Wriggers, S. Löhnert

Bearbeitung:

D. Nolte

Kurzbeschreibung:

Imperfections in composite materials can occur at interfaces but also within the matrix material, particles or fibers. These imperfections often lead to cracks and thus are responsible for degradation and failure of these heterogeneous materials. In this project the attention turns to the dynamic crack propagation. Therefore a numerical approach by using the eXtended Finite Element Method (XFEM) to describe the problem within heterogeneous materials will be developed. The XFEM has proven to be adequate to handle cracks and heterogeneities in a precise geometrical and numerical framework.

 

| details |