Publikationen

T. Bode, C. Weißenfels, P. Wriggers (2020): Peridynamic Petrov-Galerkin method: A generalization of the peridynamic theory of correspondence materials,  Computer Methods in Applied Mechanics and Engineering, Volume 358
DOI: 10.1016/j.cma.2019.112636

N. Noii, F. Aldakheel, T. Wick, P. Wriggers (2020): An adaptive global-local approach for phase-field modeling of anisotropic brittle fracture,  Computer Methods in Applied Mechanics and Engineering
DOI: https://doi.org/10.1016/j.cma.2019.112744

A. Hussein, P. Wriggers, B. Hudobivnik, F. Aldakheel, P.-A. Guidault, O. Allix (2020): Treatment of Brittle Fracture in Solids with the Virtual Element Method,  Virtual Design and Validation
DOI: https://doi.org/10.1007/978-3-030-38156-1_11

C. Böhm, J. Kruse, M. Stonis, F. Aldakheel, P. Wriggers (2020): Virtual Element Method for Cross-Wedge Rolling during Tailored Forming Processes,  Procedia Manufacturing
DOI: https://doi.org/10.1016/j.promfg.2020.04.220

P. Wriggers, F. Aldakheel, L. Lohaus, M. Heist (2020): Water-induced damage mechanisms of cyclically loaded High-performance concretes,  BAUINGENIEUR

F. Aldakheel, N. Noii, T. Wick, P. Wriggers (2020): A global-local approach for hydraulic phase-field fracture in poroelastic media
arXiv: arXiv:2001.06055

M. Cihan, F. Aldakheel, B. Hudobivnik, P. Wriggers (2020): Virtual Element Formulation For Finite Strain Elastodynamics
arXiv: arXiv:2002.02680

M. Dittmann, F. Aldakheel, J. Schulte, F. Schmidt, M. Krüger, P. Wriggers, C. Hesch (2020): Phase-field modeling of porous-ductile fracture in non-linear thermo-elasto-plastic solids,  Computer Methods in Applied Mechanics and Engineering
DOI: https://doi.org/10.1016/j.cma.2019.112730

F. Aldakheel (2020): A microscale model for concrete failure in poro-elasto-plastic media,  Theoretical and Applied Fracture Mechanics
DOI: https://doi.org/10.1016/j.tafmec.2020.102517

A.G. Neto, P. Wriggers (2020): Numerical method for solution of pointwise contact between surfaces,  Computer Methods in Applied Mechanics and Engineering
DOI: https://doi.org/10.1016/j.cma.2020.112971

Julia Augustin, F. Feichtner, A. Waselau, S. Julmi, C. Klose, P. Wriggers, H. J. Maier, A. Meyer‐Lindenberg (2020): Comparison of two pore sizes of LAE442 scaffolds and their effect on degradation and osseointegration behavior in the rabbit model,  Journal of Biomedical Materials Research Part B: Applied Biomaterials
DOI: https://doi.org/10.1002/jbm.b.34607

J.P. Fürstenau, C. Weißenfels, P. Wriggers (2020): Free surface tension in incompressible smoothed particle hydrodynamcis (ISPH),  Computational Mechanics
DOI: https://doi.org/10.1007/s00466-019-01780-6

P. Hartmann, C. Weißenfels, P. Wriggers (2020): Application of Enhanced Peridynamic Correspondence Formulation for Three-Dimensional Simulations at Large Strains,  Virtual Design and Validation
DOI: https://doi.org/10.1007/978-3-030-38156-1_5

F. Bussolati, P.A. Guidault, M.L.E. Guiton, O. Allix, P. Wriggers (2020): Robust Contact and Friction Model for the Fatigue Estimate of a Wire Rope in the Mooring Line of a Floating Offshore Wind Turbine,  Virtual Design and Validation
DOI: https://doi.org/10.1007/978-3-030-38156-1_13

S. Hosseini, S. Löhnert, P. Wriggers, E. Baranger (2020): A Multiscale Projection Method for the Analysis of Fiber Microbuckling in Fiber Reinforced Composites,  Virtual Design and Validation
DOI: https://doi.org/10.1007/978-3-030-38156-1_9

P. Wriggers, B. Avci (2020): Discrete Element Methods: Basics and Applications in Engineering,  Modeling in Engineering Using Innovative Numerical Methods for Solids and Fluids
DOI: https://doi.org/10.1007/978-3-030-37518-8_1

N. Viebahn, J. Schröder, P. Wriggers (2020): A Concept for the Extension of the Assumed Stress Finite Element Method to Hyperelasticity,  Novel Finite Element Technologies for Solids and Structures
DOI: https://doi.org/10.1007/978-3-030-33520-5_4

B. Yan, J. Ma, D. Wu, P. Wriggers (2020): The analyses of dynamic response and reliability for failure-dependent stochastic micro-resonator with thermoelastic coupling effects,  Applied Mathematical Modelling
DOI: https://doi.org/10.1016/j.apm.2019.09.040

J. Plagge, A. Ricker, N.H. Kröger, P. Wriggers, M. Klüppel (2020): Efficient modeling of filled rubber assuming stress-induced microscopic restructurization,  International Journal of Engineering Science

H. Wessels, C. Weißenfels, P. Wriggers (2020): The Neural Particle Method - An Updated Lagrangian Physics Informed Neural Network for Computational Fluid Dynamics,  Computer Methods in Applied Mechanics and Engineering
DOI: https://doi.org/10.1016/j.cma.2020.113127
arXiv: https://arxiv.org/abs/2003.10208

T. Bode, C. Weißenfels, P. Wriggers (2020): Mixed peridynamic formulations for compressible and incompressible finite deformations,  Computational Mechanics
DOI: 10.1007/s00466-020-01824-2

S. Zeller, M. Baldrich, G. Gerstein, F. Nürnberger, S. Löhnert, H. J. Maier, P. Wriggers (2019): Material models for the thermoplastic material behaviour of a dual-phase steel on a microscopic and a macroscopic length scale,  Journal of the Mechanics and Physics of Solids
DOI: 10.1016/j.jmps.2019.04.012

M. von Hoegen, M. Marino, J. Schröder and P. Wriggers (2019): Direct and inverse identification of constitutive parameters from the structure of soft tissues. Part 2: dispersed arrangement of collagen fibers,  Biomechanics and Modeling in Mechanobiology, in press,
DOI: 10.1007/s10237-019-01119-3

M. Marino, P. Wriggers (2019): Micro–macro constitutive modeling and finite element analytical-based formulations for fibrous materials: A multiscale structural approach for crimped fibers,  Comput. Methods Appl. Mech. Engrg. 344:938-969
DOI: 10.1016/j.cma.2018.10.016

B. He, B. Javvaji, X. Zhuang (2019): Characterizing Flexoelectricity in Composite Material Using the Element-Free Galerkin Method ,  Energies 12 (2019) 271
DOI: 10.3390/en12020271

M. Soleimani (2019): Finite strain visco-elastic growth driven by nutrient diffusion: theory, FEM implementation and an application to the biofilm growth,  Computational Mechanics
DOI: 10.1007/s00466-019-01708-0

M. Gierig, L. Flessing (2019): A Resonance Tracking Approach from Adaptive Control,  GAMM Archive for Students, 1(1), 6-17
DOI: https://doi.org/10.1002/pamm.201900259

X. Zhuang, B. He, B. Javvaji, H. S. Park (2019): Intrinsic bending flexoelectric constants in two-dimensional materials ,  Physical Review B 99 (2019) 054105
DOI: 10.1103/PhysRevB.99.054105

S. Julmi, A.-K. Krüger, A.-C. Waselau, A. Meyer-Lindenberg, P. Wriggers, C. Klose, H. J. Maier (2019): Processing and coating of open-pored absorbable magnesium-based bone implants,  Materials Science & Engineering C 98 (2019) 1073-1086
DOI: 10.1016/j.msec.2018.12.125

A. Hajikhani, F. Scocozza, M. Conti, M. Marino, F. Auricchio, and P. Wriggers (2019): Experimental characterization and computational modeling of hydrogel cross-linking for bioprinting applications,  The International journal of artificial organs 42, no. 10 (2019): 548-557.

Fürstenau, J., Wessels, H., Weißenfels, C., Wriggers, P. (2019): Generating virtual process maps of SLM using powder-scale SPH simulations,  Computational Particle Mechanics
DOI: 10.1007/s40571-019-00296-3

B. Hudobivnik, F. Aldakheel and P. Wriggers (2018): Low order 3D virtual element formulation for finite elasto–plastic deformations,  Computational Mechanics

Ma, J., Du, W., Gao, W., Wriggers, P., Xue, X. (2018): Multiscale finite element analysis of uncertain-but-bounded heterogeneous materials at finite deformation,  Finite Elements in Analysis and Design

Aldakheel, F., Hudobivnik, B., Hussein, A., (2018): Phase-field modeling of brittle fracture using an efficient virtual element scheme,  Computer Methods in Applied Mechanics and Engineering

Kruse, R., Nguyen-Thanh, N., Wriggers, P. (2018): De Lorenzis, L., Isogeometric frictionless contact analysis with the third medium method,  Computational Mechanics

Dittmann, M., Aldakheel, F., Schulte, J., Wriggers, P., Hesch, C. (2018): Variational phase-field formulation of non-linear ductile fracture,  Computer Methods in Applied Mechanics and Engineering

C. Carstensen, P. Brinkmann, F. Hellwig and P. Wriggers (2018): Nonlinear discontinuous Petrov-Galerkin methods,  Numerische Mechanik

S. Beese, S. Loehnert, P. Wriggers (2018): 3D ductile crack propagation within a polycrystalline microstructure using XFEM,  Computational Mechanics

M L. De Bellis, P. Wriggers, B. Hudobivnik, G. Zavarise (2018): Virtual element formulation for isotropic damage,  Finite Element Analysis and Design

C. Weissenfels and P. Wriggers (2018): Stabilization algorithm for the optimal transportation meshfree approximation scheme,  Computer Methods in Applied Mechanics and Engineering

V.H. Nguyen, D. Zheng, F. Schmerwitz and P. Wriggers (2018): An advanced abrasion model for tire wear,  Wear

S. Yazdani, W.J.H. Rust, P. Wriggers (2018): Delamination onset and growth in composite shells,  Computers & Structures

F. Aldakheel, P. Wriggers and C. Miehe (2018): A modified Gurson-type plasticity model at finite strains: formulation, numerical analysis and phase-field coupling,  Computational Mechanics

A. G. Neto, P. M. Pimenta and P. Wriggers (2018): Contact between spheres and general surfaces,  Computer Methods in Applied Mechanics and Engineering

VM. Nguyen-Thanh, X. Zhuang, H. Nguyen-Xuan, T. Rabczuk, P. Wriggers (2018): A Virtual Element Method for 2D linear elastic fracture analysis.,  Computer Methods in Applied Mechanics and Engineering, Volume 340, 1 October 2018, Pages 366-395
DOI: 10.1016/j.cma.2018.05.021

H. Wessels, T. Bode, C. Weißenfels, P. Wriggers, T.I. Zohdi (2018): Investigation of Heat Source Modeling for Selective Laser Melting,  Computational Mechanics
DOI: 10.1007/s00466-018-1631-4

Y. Zhang, X. Zhuang (2018): Cracking elements: a self-propagating Strong Discontinuity,  Finite Elements in Analysis and Design

W. WU, H. Zhu, J.S. Lin, X. Zhuang, G. Ma (2018): Tunnel stability assessment by 3D DDA-key block analysis ,  . Tunnelling and Underground Space Technology

N. Vu-Bac, T.X. Duong, T. Lahmer, X. Zhuang, R. Sauer, H. Park, T. Rabczuk (2018): A NURBS-based Inverse Analysis for Reconstruction of Nonlinear Deformations of Thin Shell Structures ,  Computer Methods in Applied Mechanics & Engineering.

Y. Zhang, X. Zhuang. (2018): A softening-healing law for self-healing quasi-brittle materials: analyzing with strong discontinuity embedded approach ,  Engineering Fracture Mechanics

K. Hamdia, X. Zhuang, N. Alajlan, and T. Rabczuk (2018): Sensitivity and uncertainty analyses for exoelectric nanostructures ,  Computer Methods in Applied Mechanics and Engineering

M. Soleimani, S. Sahraee, P. Wriggers (2018): Red blood cell simulation using a coupled shell–fluid analysis purely based on the SPH method,  Biomechanics and modeling in mechanobiology
DOI: 10.1007/s10237-018-1085-9

B. Javvaji, P. R. Budarapu, M. Paggi, X. Zhuang, T. Rabczuk (2018): Fracture Properties of Graphene-Coated Silicon for Photovoltaics ,  Advanced Theory and Simulations
DOI: 10.1002/adts.201800097

P. R. Budarapu, B. Javvaji, J. Reinoso, M. Paggi, T. Rabczuk (2018): A three dimensional adaptive multiscale method for crack growth in Silicon ,  Theoretical and Applied Fracture Mechanics
DOI: https:// doi.org/10.1016/j.tafmec.2018.06.014

H. Wessels, C. Weißenfels, P. Wriggers (2018): Metal particle fusion analysis for additive manufacturing using the stabilized optimal transportation meshfree method,  Computer methods in applied mechanics and engineering
DOI: 10.1016/j.cma.2018.04.042

Y. Zhang, X. Zhuang, R. Lackner. (2018): Stability analysis of shotcrete supported crown of NATM tunnels with Discontinuity Layout Optimization ,  International Journal for Numerical and Analytical Methods in Geomechanics

S. Zhou, X. Zhuang, T. Rabczuk (2018): A phase-field modeling approach of fracture propagation in poro-elastic media. Engineering Geology ,  Engineering Geology

S. Zhou, T. Rabczuk, X. Zhuang. (2018): Phase field modeling of quasi-static and dynamic crack propagation:COMSOL implementation and case studies ,  Advances in Engineering Software

M. Marino, M. von Hoegen, J. Schröder, P. Wriggers (2018): Direct and inverse identification of constitutive parameters from the structure of soft tissues. Part 1: micro- and nanostructure of collagen fibers,  Biomechanics and Modeling in Mechanobiology 17:1011-1036
DOI: 10.1007/s10237-018-1009-8

B. He, B. Javvaji, X. Zhuang (2018): Size dependent flexoelectric and mechanical properties of barium titanate nanobelt: a molecular dynamics study,  Physica B: Physics of Condensed Matter (2018)

B. Javvaji, B He, X Zhuang (2018): The generation of piezoelectricity and flexoelectricity in graphene by breaking the materials symmetries,  Nanotechnology
DOI: 10.1088/1361-6528/aab5ad

M. A. Chaudry, C. Woitzik, A. Düster, P. Wriggers (2017): Experimental and numerical characterization of expanded glass granules. J. of Comp. Part. Mech, 2017.
DOI: 10.1007/s40571-017-0169-0.

M. A. Chaudry ,P. Wriggers (2017): On the computational aspects of comminution in discrete element method. J. of Comp. Part. Mech,2017
DOI: 10.1007/s40571-017-0161-8

P. Wriggers, B.D. Reddy, W. T. Rust, B. Hudobivnik (2017): Efficient virtual element formulations for compressible and incompressible finite deformations,  Computational Mechanics (2017) 60:253–268
DOI: 10.1007/s00466-017-1405-4

P. Wriggers, B. Hudobivnik (2017): A low order virtual element formulation for finite elasto-plastic deformations,  Computer Methods in Applied Mechanics and Engineering
DOI: 10.1016/j.cma.2017.08.053

M. Frémond, M. Marino, E. Rocca (2017): Collisions in Shape Memory Alloys,  GAMM- Mitteilungen 40:157-183
DOI: 10.1002/gamm.201730002

Z. Dai, H. Ren, X. Zhuang, T. Rabczuk (2017): Dual-Support Smoothed Particle Hydrodynamics for Elastic Mechanics,  ,International Journal of Computational Methods

Ren H, Zhuang X, Rabczuk T (2017): Implementation of GTN Model in Dual-horizon Peridynamics,  .Procedia Engineering

N. Nguyen-Thanh, X. Zhuang, J. Kiendl, R. Schmidt, H. Nguyen-Xuan, R. Wuchnerb, K.U. Bletzin- ger,Y. Bazilevs, T. Rabczuk (2017): Isogeometric analysis of large-deformation thin shells using RHT-splines for multiple-patch coupling ,  Computer Methods in Applied Mechanics and Engineering

W. Wu, X. ZhuangX, H. Zhu, X. Liu, G. Ma (2017): Centroid sliding pyramid method for removability and stability analysis of fractured hard rock,  Acta Geotechnica

H. Ren, X. Zhuang, T. Rabczuk (2017): Dual horizon peridynamics: a stable solution to varying horizon,  Computer Methods in Applied Mechanics and Engineering

T. Quoc-Thai, T. Rabczuk, X. Zhuang (2017): Numerical study for cohesive zone model in delamination analysis based on higher-order B-spline functions ,  Journal of Micromechanics and Molecular Physics

G. Liu, X. Zhuang, Z. Cui (2017): Three-dimensional slope stability analysis using independent cover based numerical manifold and vector method,  Engineering Geology

H. Zhu, W. Wu, X. Zhuang, Y. Cai (2017): Method for estimating normal contact parameters in collision modeling using discontinuous deformation analysis,  .ASCE International Journal of Geomechanics

H.B. Nguyen, X. Zhuang, P. Wriggers, T. Rabczuk, M.E. Mears, H.D. Han (2017): Isogeometric symmetric Galerkin boundary element method for three-dimensional elasticity problems,  Computer Methods in Applied Mechanics and Engineering

Y. Shen, P. He, X. Zhuang (2017): Fracture Model for the prediction of the Electrical percolation threshold in CNTs/Polymer composites. ,  Frontiers of Structural & Civil Engineering

K.M. Hamdia, M. Silanie, X. Zhuang, P. He, T. Rabczuk (2017): Stochastic analysis of the fracture toughness of polymeric nanoparticle composites using polynomial chaos expansions ,  International Journal of Fracture

Nanthakumar.S. S, Zhuang.X, Park.H. S, Rabczuk.T (2017): Topology optimization of flexoelectric structures,  Journal of the Mechanics & Physics of Solids

X. Zhuang, Q. Wang, H. Zhu. (2017): Effective properties of composites with periodic random packing of ellipsoids ,  Materials

X. Zhuang, Q. Wang, H. Zhu (2017): Multiscale modelling of hydro-mechanical couplings in quasi-brittle materials ,  International Journal of Fractures

M. Marino, G. Pontrelli, G. Vairo, P. Wriggers (2017): A chemo-mechano-biological formulation for the effects of biochemical alterations on arterial mechanics: the role of molecular transport and multiscale tissue remodelling,  Journal of the Royal Society Interface 14:20170615
DOI: 10.1098/rsif.2017.0615

D. Bianchi, E. Monaldo, A. Gizzi, M. Marino, S. Filippi, G. Vairo (2017): A FSI computational framework for vascular physiopathology: A novel flow-tissue multiscale strategy,  Medical Engineering & Physics 47:25-37
DOI: 10.1016/j.medengphy.2017.06.028

S. Reschka, L. Munk, P. Wriggers, H. J. Maier (2017): An EBSD Evaluation of the Microstructure of Crept Nimonic 101 for the Validation of a Polycrystal–Plasticity Model,  Journal of Materials Engineering and Performance
DOI: https://doi.org/10.1007/s11665-017-3046-3

M. Marino, P. Wriggers (2017): Finite strain response of crimped fibers under uniaxial traction: an analytical approach applied to collagen,  Journal of the Mechanics and Physics of Solids 98:429-453
DOI: 10.1016/j.jmps.2016.05.010

Steffen Beese, Stefan Loehnert, Peter Wriggers (2017): 3D ductile crack propagation within a polycrystalline microstructure using XFEM ,  Computational Mechanics
DOI: 10.1007/s00466-017-1427-y

P. Wagner, P. Wriggers, L. Veltmaat, H. Clasen, C. Prange, B. Wies (2017): Numerical multiscale modelling and experimental validation of low speed rubber friction on rough road surfaces including hysteretic and adhesive effects,  Tribology International, Volume 111, pp. 243–253
DOI: 10.1016/j.triboint.2017.03.015

P. Wriggers, W.T. Rust, B.D. Reddy (2016): A virtual element method for contact ,  Computational Mechanics (2016) 58: 1039-1050
DOI: 10.1007/s00466-016-1331-x

M. Marino (2016): Molecular and intermolecular effects in collagen fibril mechanics: a multiscale analytical model compared with atomistic and experimental studies,  Biomechanics and Modeling in Mechanobiology 15(1):133-154
DOI: 10.1007/s10237-015-0707-8

J. Costa, P. Pimenta and P. Wriggers (2016): Meshless analysis of shear deformable shells: boundary and interface constraints,  Computational Mechanics, vol. 57, pp. 679-700

J. Schröder, N. Viebahn, D. Balzani and P. Wriggers (2016): A novel mixed finite element for finite anisotropic elasticity; the SKA-element Simplified Kinematics for Anisotropy,  Computer Methods in Applied Mechanics and Engineering, vol. 310, pp. 475-494

P. S. B. Nigro and M. Anndif and Y. Teixeira and P. Pimenta and P. Wriggers (2016): An adaptive model order reduction by proper snapshot selection for nonlinear dynamical problems,  Computational Mechanics, vol. 57, pp. 537-554

Wriggers, P., Schröder, J. and Auricchio, F. (2016): Finite element formulations for large strain anisotropic materials,  International Journal on Advanced Modelling and Simulation in Engineering Sciences, (accepted)

D. Bianchi, M. Marino, G. Vairo (2016): An integrated computational approach for aortic mechanics including geometric,histological and chemico-physical data,  Journal of Biomechanics 49(12):2331-2340
DOI: 10.1016/j.jbiomech.2016.01.045

Shirazi, AHN and Mohebbi, Farzad and Azadi Kakavand, MR and He, B and Rabczuk, Timon (2016): Paraffin Nanocomposites for Heat Management of Lithium-Ion Batteries: A Computational Investigation,  Journal of Nanomaterials

H. Zhu, Q. Wang, X. Zhuang (2016): A nonlinear semi-concurrent multiscale method for fractures,  International Journal of Impact Engineering

H. Zhu, W. Wu, J. Chen, G. Ma, X. Zhuang (2016): Integration of three dimensional discontinuous deformation analysis (DDA) with binocular photogrammetry for stability analysis of tunnels in blocky rock mass ,  Tunneling and Underground Space Technology

A. Msekh, M. Silani, M. Jamshidian, P. Areias, X. Zhuang, G. Zi, P. He, T. Rabczuk (2016): Predictions of J integral and tensile strength of clay/epoxy nanocomposites material using phase field model,  Composites Part B

K.M. Hamdia, X. Zhuang, P. He, T. Rabczuk (2016): Fracture toughness of polymeric particle nanocomposites:Evaluation of Models performance using Bayesian method,  Composite Science & Technology

S. Nanthakumar, T. Lahmer, X. Zhuang, H.S. Park, T. Rabczuk (2016): Topology Optimization of Piezoelectric Nanostructures ,  Journal of the Mechanics and Physics of Solids

A.A. Mousavi, B. Arash, X. Zhuang, T. Rabczuk (2016): A coarse-grained model for the elastic properties of cross linked short carbon nanotube/polymer composites,  Composites Part B

B. He, B. Mortazavi, X. Zhuang, T. Rabczuk (2016): Modeling Kapitza Resistance of Two-Phase Composite Material ,  Composite Structures

H. Ren, X. Zhuang, Y. Cai, T. Rabczuk (2016): Dual-horizon peridynamics,  International Journal for Numerical Methods in Engineering

N. Vu-Bac, T. Lahmer, X. Zhuang, T. Nguyen-Thoi, T. Rabczuk (2016): A software framework for probabilistic sensitivity analysis for computationally expensive models ,  Advances in Software Engineering

H. Ren, X. Zhuang, T. Rabczuk (2016): A new peridynamic formulation with shear deformation for elastic solid ,  Journal of Micromechanics and Molecular Physics

Z. Lu, W. Li, X. Zhuang, T. Rabczuk (2016): Quantitative assessment of engineering geological suitability for multilayer Urban Underground Space ,  Tunnelling and Underground Space Technology

B.H. Nguyen, H.D. Tran, C. Anitescu, X. Zhuang, and T. Rabczuk (2016): An Isogeometric Symmetric Galerkin Boundary Element Method for Elastostatic Analysis ,  Computer Methods in Applied Mechanics & Engineering

S. Yazdani, W.J.H. Rust, P. Wriggers (2016): Delamination growth in composite laminates of variable stiffness,  International Journal for Numerical Methods in Engineering
DOI: 10.1002/nme.5264

A. B. Harish, P. Wriggers, J. Jungk, N. Hojdis and C. Recker (2016): Mesoscale constitutive modeling of non-crystallizing filled elastomers,  Computational Mechanics, Vol. 57(4), pp. 653-677 | Datei |
DOI: 10.1007/s00466-015-1251-1

M. Paggi and P. Wriggers (2016): Node-to-segment and node-to-surface interface finite elements for fracture mechanics,  Computer Methods in Applied Mechanics and Engineering, vol. 300, pp. 540-560

P. Wriggers (2016): Modelle in der Strukturmechanik,  Bauingenieur, vol. 91, pp. 330-334

D. Gottschalk, A. McBride, B.D. Reddy, A. Javil, P. Wriggers and C.B. Hirschberger (2016): Computational and theoretical aspects of a grain-boundary model that accounts for grain misorientation and grain-boundary orientation,  Computational Materials Science, vol. 111, pp. 443-459

M. Asgari, F. Fereshteh-Sanieea, S.M. Pezeshki, M. Barati (2016): Non-equal channel angular pressing (NECAP) of AZ80 Magnesium alloy: Effects of process parameters on strain homogeneity, grain refinement and mechanical properties,  Materials Science and Engineering: A Volume 678, 2016, Pages 320–328.

Meisam Soleimani, Peter Wriggers, Henryke Rath, Meike Stiesch (2016): Numerical simulation and experimental validation of biofilm in a multi-physics framework using an SPH based method
DOI: 10.1007/s00466-016-1308-9

S. Yazdani, W.J.H. Rust, P. Wriggers (2016): An XFEM approach for modelling delamination in composite laminates,  Composite Structures
DOI: 10.1016/j.compstruct.2015.09.035

L. Wolters, S. Besdo, N. Angrisani, P. Wriggers, B. Hering, J. M. Seitz, J. Reifenrath (2015): Degradation behaviour of LAE442-based plate–screw-systems in an in vitro bone model,  Materials Science and Engineering, Vol. 49, pp. 305-315

M. Marino, G. Vairo, P. Wriggers (2015): Multiscale hierarchical mechanics in soft tissues,  Proceedings in Applied Mathematics and Mechanics 15:35-38
DOI: 10.1002/pamm.201510010

F. Nerilli, M. Marino, G. Vairo (2015): A numerical failure analysis of multi-bolted joints in FRP laminates based on basalt fibers,  Procedia Engineering 109:492-506
DOI: 10.1016/j.proeng.2015.06.255

N. Vu-Bac, R. Rafiee, T. Lahmer, X. Zhuang, T. Rabczuk (2015): Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters,  Composites Part B: Engineering

X. Zhuang, Q. Wang, H. Zhu (2015): A 3D computational homogenization model for porous material and parameters identification,  Computational Materials Science

N. Nguyen-Thanh, N. Valizadeh, M.N. Nguyen, H. Nguyen-Xuan, X. Zhuang, P. Areias, G. Zi, Y. Bazilevs, L. de Lorenzis, T. Rabczuk (2015): An extended isogeometric thin shell analysis based on Kirchhoff-Love theory,  Computer Methods in Applied Mechanics & Engineering

N. Vu-Bac, M. Silani, T. Lahmer, X. Zhuang, T. Rabczuk (2015): A unified framework for stochastic predictions of mechanical properties of polymeric nanocomposites ,  Computational Materials Science

H. Ghasemi, R. Brighenti, X. Zhuang*, J. Muthu, T. Rabczuk (2015): Optimal fiber content and distribution in fiber-reinforced solids using a reliability and NURBS based sequential optimization approach,  Structural and Multidisciplinary Optimization

S. Quayum, X. Zhuang, T. Rabczuk (2015): Computational model generation and RVE design of self-healing concrete,  Frontiers of Structural and Civil Engineering

M. Bayat, S.Sh. Ghorashi, J.Amani, L.Andersen, L.B. Ibsen, T.Rabczuk, X. Zhuang, H.Talebi (2015): Recovery-Based Error Estimation in the Dynamic Analysis of Offshore Wind Turbine Monopile Foundations ,  Computers & Geotechnics

S.S. Nanthakumar, T. Lamher, X. Zhuang, G. Zi, T. Rabczuk (2015): Detections of material interface using a regularized level set method in piezoelectric structures ,  Inverse Problems in Science & Engineering

K.H. Hamdia, M.A. Msekh, M. Silania, N. Vu-Bac, X. Zhuang, T.Nguyen-Thoi, T. Rabczuk (2015): Uncertainty quantification of fracture properties of polymeric nanocomposites based on phase field modeling ,  Composite Structures

C. Weißenfels and P. Wriggers (2015): Methods to project plasticity models onto the contact surface applied to soil structure interactions,  Computers and Geotechnics 65 (2015) 187–198 | Datei |

P. Wagner, P. Wriggers, C. Klapproth, C. Prange, B. Wies (2015): Multiscale FEM approach for hysteresis friction of rubber on rough surfaces,  Computer Methods in Applied Mechanics and Engineering, Volume 296, pp. 150-168, DOI: 10.1016/j.cma.2015.08.003

Stefan Loehnert (2015): Stabilizing the XFEM for static and dynamic crack simulations,  Proceedings in Applied Mathematics and Mechanics, vol 15, pp 137-138
DOI: 10.1002/pamm.201510059

S. Beese, S. Loehnert, P. Wriggers (2015): 3D Ductile crack propagation with the XFEM,  Proceedings in Applied Mathematics and Mechanics, vol 15, pp. 747-748
DOI: 10.1002/pamm.201510354

S. Yazdani, P. Ribeiro (2015): A layerwise p-version finite element formulation for free vibration analysis of thick composite laminates with curvilinear fibres,  Composite Structures
DOI: 10.1016/j.compstruct.2014.10.030

M. Holl, T. Rogge, S. Loehnert, P. Wriggers, R. Rolfes (2014): 3D multiscale crack propagation using the XFEM applied to a gas turbine blade,  Computational Mechanics; Vol. 53; Issue 1; pages 173-188; DOI: 10.1007/s00466-013-0900-5

S. Loehnert (2014): A stabilization technique for the regularization of nearly singular extended finite elements,  Computational Mechanics, DOI: 10.1007/s00466-014-1003-7

M. Bauer, T. Schilling, M. Weidling, D. Hartung, Ch. Biskup, P. Wriggers, F. Wacker, Fr. -W. Bach, A. Haverich, T. Hassel (2014): Geometric adaption of biodegradable magnesium alloy scaffolds to stabilise biological myocardial grafts. Part I,  Journal of Materials Science: Materials in Medicine, Volume 25, Issue 3, Page 909-916, DOI 10.1007/s10856-013-5100-5

J. Ma, S.Q. Zhang, P. Wriggers, W. Gao, L. de Lorenzis (2014): Stochastic homogenized effective properties of three-dimensional composite material with full randomness and correlation in the microstructure,  Computers & Structures, 144 pp. 62-74, DOI: 10.1016/j.compstruc.2014.06.003

P. Wagner, F. Schmerwitz, H. Lind, B. Wies (2014): Wear and Related Topology of Rubber Surface,  Tire Science and Technology, TSTCA, Vol. 42, No. 4, October–December 2014, pp. 200–215, DOI: 10.2346/tire.14.420401

Y. Cai, H. Zhu, X. Zhuang (2014): A continuous/discontinuous deformation analysis (CDDA) method based on deformable blocks for fracture modeling ,  Frontiers of Structural & Civil Engineering

X. Li, Y. Zuo, X. Zhuang, H. Zhu (2014): Estimation of fracture trace length distributions using probability weighted moments and L-moments ,  Engineering Geology

N. Vu-Bac, T. Lahmer, H. Keitel, J. Zhao, X. Zhuang, T. Rabczuk (2014): Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations,  Mechanics of Materials

H. Ghasemi, R. Brighenti, X. Zhuang, J. Muthu, T. Rabczuk (2014): Optimization of fiber distribution in fiber reinforced composite by using NURBS functions ,  .Computational Materials Science

X. Zhuang, Y.C. Cai (2014): A meshless local Petrov-Galerkin Shepard and least-squares method based on duo nodal supports ,  Mathematical Problems in Engineering

X. Zhuang, R. Huang, T. Rabczuk, C. Liang (2014): A coupled thermo-hydro-mechanical model of jointed hard rock for compressed air energy storage ,  Mathematical Problems in Engineering

N. Vu-Bac, T. Lahmer, Y. Zhang, X. Zhuang, T. Rabczuk (2014): Stochastic predictions of interfacial characteristic of polymeric nanocomposites (PNCs) ,  Composites Part B

X. Zhuang, H. Zhu, C. Augarde (2014): An improved meshless Shepard and least square method possessing the delta property and requiring no singular weight function,  Computational Mechanics

X. Zhuang, Y. Cai, C. Augarde (2014): A meshless sub-region radial point interpolation method for accurate calculation of crack tip fields ,  Theoretical and Applied Fracture Mechanics

P. Budarapu, R. Gracie, S-W. Yang, X. Zhuang, T. Rabczuk (2014): Efficient coarse graining in multiscale modeling of fracture,  Theoretical and Applied Fracture Mechanics

E. Li, X. Zhuang*, W. Zheng, Y. Cai, H. Zhu (2014): Effect of graph generation on slope stability analysis based on graph theory ,  Journal of Rock Mechanics and Geotechnical Engineering

W. Wu, H. Zhu H, X. Zhuang*, G. Ma, Y. Cai (2014): A multi-shell cover algorithm for contact detection in the three dimensional discontinuous deformation analysis ,  Theoretical and Applied Fracture Mechanics,

H. Ghasemi, R. Rafiee, X. Zhuang, J. Muthu, T. Rabczuk (2014): Uncertainties propagation in metamodel-based probabilistic optimization of CNT/polymer composite structure using stochastic multi-scale mo- deling ,  Computational Materials Science

X. Zhuang, J. Chun, H. Zhu (2014): A comparative study on unfilled and filled crack propagation for rock-like brittle material,  Theoretical and Applied Fracture Mechanics

W. Zheng, X. Zhuang*, D.D. Tannant, Y. Cai, S. Nunoo (2014): Unified continuum/discontinuum modeling framework for slope stability assessment ,  Engineering Geology

Y. Zhang, X. Zhuang*, J. Muthu, T. Mabrouki, M. Fontaine, Y. Gong, T. Rabczuk (2014): Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation,  Composites Part B: Engineering

H. Zhu, Y. Zuo, X. Li, J. Deng, X. Zhuang (2014): Estimation of fracture diameter distributions using maximum entropy principle ,  International Journal of Rock Mechanics and Mining Sciences

M. Marino, G. Vairo (2014): Influence of inter-molecular interactions on the elasto-damage mechanics of collagen fibrils: a bottom-up approach towards macroscopic tissue modeling,  Journal of the Mechanics and Physics of Solids 73:38-54
DOI: 10.1016/j.jmps.2014.08.009

M. Marino (2014): An ideal model for stress-induced martensitic transformations in shape-memory alloys,  Fracture and Structural Integrity 29:96-110
DOI: 10.3221/IGF-ESIS.29.10

M. Marino, F. Nerilli, G. Vairo (2014): A finite-element approach for the analysis of pin-bearing failure of composite laminates,  Fracture and Structural Integrity 29:241-250
DOI: 10.3221/IGF-ESIS.29.21

F. Maceri, M. Marino, G. Vairo (2014): An operative algebraic formulation for the unilaterally-constrained mechanical problem of smart tensegrities,  International Journal of Solids and Structures 51:3333–3349
DOI: 10.1016/j.ijsolstr.2014.05.021

M. Marino, G. Vairo (2014): Stress and strain localization in stretched collagenous tissues via a multiscale modelling approach,  Computer Methods in Biomechanics and Biomedical Engineering 17:11-30
DOI: 10.1080/10255842.2012.658043

T. Wu, I. Temizer and P. Wriggers (2014): Multiscale Hydro-Thermo-Chemo-Mechanical Coupling: Application to Alkali-Silica Reaction,  Journal of Computational Material Science, Vol 84, 381-395.

R. Dimitri, L. De Lorenzis, M.A. Scott, P. Wriggers, R.L. Taylor, G. Zavarise (2014): Isogeometric large deformation frictionless contact using T-splines,  213. Computer Methods in Applied Mechanics and Engineering, Volume 269, pp. 394-414, DOI: 10.1016/j.cma.2013.11.002

S.O.R. Biabanaki, A.R. Khoei, P. Wriggers (2014): Polygonal finite element methods for contact-impact problems on non-conformal meshes,  Computer Methods in Applied Mechanics and Engineering, Volume 269, pp. 198-221, DOI: 10.1016/j.cma.2013.10.025

G.A. Drosopoulos, P. Wriggers, G.E. Stavroulakis (2014): A multi-scale computational method including contact for the analysis of damage in composite materials,  Computational Material Science, 95, pp.522-535, DOI: 10.1016/j.commatsci.2014.08.004

L. De Lorenzis, P. Wriggers, TJR Hughes (2014): Isogeometric contact: a review,  GAMM‐Mitteilungen, 37 (1), pp. 85-123, DOI: 10.1002/gamm.201410005

J. Ma, J. Zhang, LJ. Li, P. Wriggers, S. Sahraee (2014): Random homogenization analysis for heterogeneous materials with full randomness and correlation in microstructure based on finite element method and Monte-carlo method,  Computational Mechanics, 54 pp. 1395-1414, DOI: 10.1007/s00466-014-1065-6

S. Yazdani, G.H. Rahimi (2014): Failure analysis of FML plates with cutouts: experimental and finite element approaches,  Mechanics
DOI: 10.5755/j01.mech.20.1.3530

S. Yazdani, P. Ribeiro, J.D. Rodrigues (2014): A p-version layerwise model for large deflection of composite plates with curvilinear fibres
DOI: 10.1016/j.compstruct.2013.09.014

S. Yazdani, P. Ribeiro (2014): Geometrically non-linear static analysis of unsymmetric composite plates with curvilinear fibres: p-version layerwise approach,  Composite Structures
DOI: 10.1016/j.compstruct.2014.07.007

S. Besdo, A.-K. Krüger, Ch. Rössig, P. Helmecke, H. Waizy, P. Wriggers, N. Angrisani, J. Reifenrath (2013): Finite Element Study of Degradable Intramedullary Nails out of Magnesium Alloy for Ovine Tibiae,  Biomedical Engineering/Biomedizinische Technik

F. Huang, H. Zhu, Q. Xu, Y. Cai, X. Zhuang (2013): The effect of weak interlayer on the failure pattern of rock mass around tunnel - Scaled model tests and numerical analysis ,  Tunnelling and Underground Space Technology

Y. Zhang, G. Chen, L. Zheng, Y. Li, X. Zhuang (2013): Effects of geometries on three-dimensional slope stability ,  Canadian Geotechnical Journal

Y. Jia, Y. Zhang, G. Xu, X. Zhuang, T. Rabczuk (2013): Reproducing Kernel Triangular B-spline-based FEM for Solving PDEs ,  Computer Methods in Applied Mechanics & Engineering

N. Vu-Bac, H. Nguyen-Xuan, L. Chen, S. Bordas, X. Zhuang*, G.R. Liu, T. Rabczuk (2013): A Phantom-Node method with edge-based strain smoothing for linear elastic fracture mechanics,  Journal of Applied Mathematics

Zheng W B, Zhuang X Y, Li Y J, et al (2013): Graph theory for stability analysis of rock/soil slopes based on numerical manifold method,  Yantu Gongcheng Xuebao/chinese Journal of Geotechnical Engineering

R. A. Sauer and M. Holl (2013): Α detailed 3D finite element analysis of the peeling behaviour of a gecko spatula,  Computer Methods in Biomechanics and Biomedical Engineering; Vol. 16; Issue 6; pages 577-591; DOI: 10.1080/10255842.2011.628944

Jiang J W, Zhuang X , Rabczuk T (2013): Orientation Dependent Thermal Conductance in Single-Layer MoS2,  Sci Rep

Y. Cai, X. Zhuang, H. Zhu (2013): A generalized and efficient method for finite cover generation in the numerical manifold method,  International Journal of Computational Methods

X. Zhuang, R. Huang, H. Zhu, H. Askes, K. Mathisen (2013): A new and simple locking-free triangular thick plate element using independent shear degrees of freedom ,  Finite Elements in Analysis and Design

N. Nguyen-Thanh, J. Muthu, X. Zhuang*, T. Rabczuk (2013): An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics ,  Computational Mechanics

F. Maceri, M. Marino, G. Vairo (2013): Equilibrium and stability of tensegrity structures: a convex analysis approach
DOI: 10.3934/dcdss.2013.6.461

F. Maceri, M. Marino, G. Vairo (2013): Age-dependent arterial mechanics via a multiscale elastic approach,  International Journal for Computational Methods in Engineering Science and Mechanics 14:141-151
DOI: 10.1080/15502287.2012.744114

T.Wu, I.Temizer and P.Wriggers (2013): Computational Thermal Homogenization of Concrete,  Journal of Cement and Concrete Composites, Vol 35(1), 59-70.

M. Holl, S. Loehnert, P. Wriggers (2013): An adaptive multiscale method for crack propagation and crack coalescence,  International Journal for Numerical Methods in Engineering; Vol. 93; Issue 1; pages 23-51; DOI: 10.1002/nme.4373

I.Temizer, T.Wu, P.Wriggers (2013) (2013): On the Optimality of the Window Method in Computational Homogenization ,  International Journal of Engineering Science, Vol. 64; page 66-73.

M. Paggi, E. Lehmann, C. Weber, A. Carpinteri, P. Wriggers, M. Schaper (2013): A numerical investigation of the interplay between cohesive cracking and plasticity in polycrystalline materials,  Comput. Mater. Sci., 77: 81-92

E. Lehmann, D. Faßmann, S. Loehnert, M. Schaper, P. Wriggers (2013): Texture development and formability prediction for pre-textured cold rolled body-centred cubic steel,  Int. J. Eng. Sci., 68: 24-37

A. Soroushian, P. Wriggers, J. Farjoodi (2013): Practical Integration of Semidiscretized Nonlinear Equations of Motion: Proper Convergence for Systems with Piecewise Linear Behavior,  Journal of Engineering Mechanics- ASME, Vol. 139, pages 114-145

P. Wriggers, B. Avci (2013): Kopplung diskreter und finiter Elemente zur Simulation von dreidimensionalen Partikelströmungen,  Bauingenieur, Vol. 88, pages 231-235

L. de Lorenzis, P. Wriggers (2013): Computational homogenization of rubber friction on rough rigid surfaces,  Computational Materials Science, Vol. 77, pages 264-280

F. Auricchio, L. Beirao da Velga, C. Lovadina, A. Reali, R. L. Taylor, P. Wriggers (2013): Approximation of incompressible large deformation elastic problems: some unresolved issues,  Computational Mechanics, DOI: 10.1007/s00466-013-0869-0

P. Wriggers, J. Schröder, A. Schwarz (2013): A finite element method for contact using a third medium,  Computational Mechanics, Vol. 52, pages 837-847

T. Gerasimov, E. Stein, P. Wriggers (2013): New simple, cheap and efficient explicit error estimator for adaptive finite element analysis in elasticity and fracture,  submitted to IJNME

J. Mirzaei, G.H. Rahimi, S. Yazdani (2013): Experimental versus numerical investigation into the effects of hoop welding in metallic pressure vessels with spherical caps,  International Journal of Advanced Design and Manufacturing Technology

S. Yazdani, G.H. Rahimi, M. Ghanbari (2013): Experimental and numerical stress analysis of FML plates with cutouts under in-plane loading,  Mechanics
DOI: 10.5755/j01.mech.19.2.4152

S. Yazdani, G.H. Rahimi (2013): Experimental and numerical stress analysis of glass fiber-reinforced polymer (GFRP)-stiffened shells with cutout under axial loading,  Scientific Research and Essays
DOI: 10.5897/SRE12.513

C. Wellmann and P. Wriggers (2012): A two-scale model of granular materials,  Computer Methods in Applied Mechanics and Engineering, Vol. 205-208, 46-58.

I. Temizer, P. Wriggers and T.R.J. Hughes (2012): Three-Dimensional Mortar-Based Frictional Contact Treatment in Isogeometric Analysis with NURBS,  Computer Methods in Applied Mechanics and Engineering, v.209-212 p.115-128.

F. Maceri, M. Marino, G. Vairo (2012): Elasto-damage modeling of biopolymer molecules response,  Computer Modeling in Engineering and Sciences, 87(5):461-481
DOI: 10.3970/cmes.2012.087.461

G.A. Drosopoulos, G.E. Stavroulakis, C.V. Massalas (2012): Invited Book Chapter for the Book: “Computer Analysis and Design of Masonry Structures”, Editor Dr. John W Bull, Saxe-Coburgh Publications, Title of Contribution “Reinforcement of Stone Arch Bridges: Unilateral Contact Models and Limit Analysis”

G.A. Drosopoulos, G.E. Stavroulakis, K.M. Abdalla (2012): 3D Finite Element Analysis of End-Plate Steel Joints,  Steel and Composite Structures, An International Journal, vol. 12, pp. 93-115

A. Kalogeropoulos, G.A. Drosopoulos, G.E. Stavroulakis (2012): Thermal-stress Analysis of a Three-Dimensional End-Plate Steel Joint,  Construction and Building Materials, vol 29, pp. 619-626

W. Zheng, X. Zhuang, Y. Cai, F. Xue (2012): A study on the modeling of prestressed anchors in rock slope and optimization ,  Chinese Journal of Geotechnical Engineering

X. Zhuang, R. Huang, H. Zhu (2012): Modelling 2D joint propagation in rock using the meshless methods and level sets ,  Chinese Journal of Rock Mechanics and Engineering

R. Mirsanei, A. Hajikhani, B. Peykari, J. Hamedi (2012): Developing a New Design for Adaptive Tuned Dynamic Vibration Absorber (ATDVA) Based on Smart Slider-Crank Mechanism to Control of Undesirable Vibrations,  International Journal of Mechanical Engineering and Mechatronic
ISSN: 1929-2724

Y. Zhang, G. Chen, J. Wu, L. Zheng, X. Zhuang (2012): Numerical Simulation of Seismic Slope Stability Analysis Based on Tension-Shear Failure Mechanism,  Geotechnical Engineering Journal of the SEAGS & AGSSEA

Zheng W B, Zhuang X Y, Cai Y C, et al (2012): Modeling of prestressed anchors in rock slope under earthquake and optimization of anchor arrangement[J] ,  Chinese Journal of Geotechnical Engineering

Zhuang X, Huang R, Zhu H (2012): Simulation for 2D compression-shear joint dynamic propagation process using meshless methods based on level sets coordinates ,  Chinese Journal of Rock Mechanics & Engineering

X. Zhuang, C. Heaney, C. Augarde (2012): On error control in the element-free Galerkin method,  Engineering Analysis with Boundary Elements

W. Zheng, X. Zhuang, Y. Cai (2012): A new method for seismic stability analysis of anchored rock slope and its application in anchor optimization ,  Frontiers of Structural and Civil Engineering

X. Zhuang, C. Augarde and K. Mathisen (2012): Fracture modelling using meshless methods and level sets in 3D: framework and modelling ,  International Journal for Numerical Methods in Engineering

J. Reifenrath, D. Gottschalk, N. Angrisani, S. Besdo, A. Meyer-Lindenberg (2012): Axial forces and bending moments in the loaded rabbit tibia in vivo,  Acta Veterinaria Scandinavica, 54:21, 2012

M. Rüter, T. Gerasimov, E. Stein (2012): Goal-oriented explicit residual-type error estimates in XFEM,  Computational Mechanics, 52(2), 361-376

S. Loehnert, C. Prange, P. Wriggers (2012): Error Controlled Adaptive Multiscale XFEM Simulation of Cracks,  International Journal of Fracture, vol 178, pp. 147-156

F. Maceri, M. Marino, G. Vairo (2012): An insight on multiscale tendon modeling in muscle-tendon integrated behavior,  Biomechanics and Modeling in Mechanobiology, 11:505-517
DOI: 10.1007/s10237-011-0329-8

E. Lehmann, S. Loehnert, P. Wriggers (2012): Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformation,  Technische Mechanik, 32 (2-5): 369-379

T. Gerasimov, A. Stylianou, G. Sweers (2012): Corners give problems when decoupling fourth order equations into second order systems,  SIAM J. Numer. Anal., 50(3), 1604-1623

D.S. Mueller-Hoeppe, P. Wriggers, S. Loehnert (2012): Crack face contact for a hexahedral-based XFEM formulation,  Computational Mechanics, vol 49, pp. 725-734

C. Prange, S. Loehnert, P. Wriggers (2012): Error estimation for crack simulations using the XFEM.,  International Journal for Numerical Methods in Engineering, vol 91, pp. 1459 - 1474

B. Avci and P. Wriggers (2012): A DEM-FEM coupling approach for the direct numerical simulation of 3D particulate flows,  Journal of Applied Mechanics, Vol. 79, 010901-(1-7).

E. Lehmann et. al. (2012): Material model identification for DC04 based on the numerical modelling of the polycrystalline microstructure and experimental data.,  Key Eng. Mater., 504-506: 993-998

E. Lehmann, S. Loehnert, P. Wriggers (2012): About the Microstructural Effects of Polycrystalline Materials and their Macroscopic Representation at Finite Deformation,  Proc. Appl. Math. Mech., 12 (1): 275-276

M. Paggi and P. Wriggers (2011): „A nonlocal cohesive zone model for finite thickness interfaces – Part I: Mathematical formulations and validation with molecular dynamics,  Computational Material Science pp 1625-1633(2011)

J. Ma, I. Temizer and P. Wriggers (2011): Random homogenization analysis in linear elasticity based on analytical bounds,  International Journal of Solids and Structures, 48 pp 280-291

L. de Lorenzis, I. Temizer, P. Wriggers and G. Zavarise (2011): A large deformation frictional contact formulation using NURBS-based isogeometric analysis,  International Journal for Numerical Methods in Engineering, 87 pp 1278-1300

L. de Lorenzis, P. Wriggers and G. Zavarise (2011): Isogeometric analysis of 3D large deformation contact problems with the augmented Lagrangian formulation,  Computational Mechancis, DOI 10.1007/s00466-011-0623-4

M. Paggi and P. Wriggers (2011): A nonlocal cohesive zone model for finite thickness interfaces – Part II: FE Implementation and application to polycristalline materials,  Computational Material Science pp 1634-1643

J. Schröder and P. Wriggers and D. Balzani (2011): A new Mixed Finite Element based on Different Approximations of the Minors of Deformation Tensors,  Computer Methods in Applied Mechanics and Engineering, 200:3583-3600

I. Temizer, P. Wriggers (2011): Homogenization in Finite Thermoelasticity,  Journal of the Mechanics and Physics of Solids, v.59 p.344–372.

I. Temizer (2011): Thermomechanical Contact Homogenization with Random Rough Surfaces and Microscopic Contact Resistance",  Tribology International, v.44 p.114-124.

H. Zhu, X. Zhuang, Y. Cai (2011): High rock slope stability analysis using the enriched meshless Shepard and least squares method,  International Journal of Computational Methods

H. Zhu, X. Li, X. Zhuang (2011): Recent advances of digitization in rock mechanics and rock engineering ,  Journal of Rock Mechanics and Geotechnical Engineering

X. Zhuang, C. Augarde and S. Bordas (2011): Accurate fracture modelling using meshless methods and level sets: formulation and 2D modelling ,  International Journal for Numerical Methods in Engineering

T. Floerkemeier, W. Aljuneidi, J. Reifenrath, N. Angrisani, D. Gottschalk, S. Besdo, A. Meyer-Lindenberg, H. Windhagen, F. Thorey (2011): Telemetric in vivo measurement of compressive forces during consolidation in a rabbit model,  Technology and Health Care, 19:3,173-183,2011

T. W. J. de Geus, R. H. J. Peerlings, C. B. Hirschberger. (2011): An analysis of the pile-up of infinite walls of edge dislocations,  In review

T. Gerasimov, M. Rüter, E. Stein (2011): An explicit residual-type error estimator for Q1-quadrilateral XFEM in 2D LEFM,  IJNME, 90(9), 1118-1155

E. Lehmann, S. Loehnert, P. Wriggers (2011): Towards the Effective Behaviour of Polycrystalline Materials for Sheet Bulk Metal Forming Processes,  AIP Conf. Proc., 1353: 1179-1184

E. Lehmann, S. Loehnert, P. Wriggers (2011): Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformation,  Proc. Appl. Math. Mech., 11 (1): 401-402

F. Maceri, M. Marino, G. Vairo (2011): Convex analysis and ideal tensegrities,  Comptes Rendus Mecanique 339:683-691
DOI: 10.1016/j.crme.2011.07.009

C. B. Hirschberger, R. H. J. Peerlings, W. A. M. Brekelmans, and M. G. D. Geers. (2011): On the role of dislocation conservation in single- slip crystal plasticity.,  Modelling and Simulation in Materials Science and Engineering, 19: 085002, doi:10.1088/0965-0393/19/8/085002

S. Loehnert, D.S. Mueller-Hoeppe, P. Wriggers (2011): 3D corrected XFEM approach and extension to finite deformation theory,  International Journal for Numerical Methods in Engineering, vol 86, pp. 431 - 452

I. Temizer, P. Wriggers and T.R.J. Hughes (2011): Contact Treatment in Isogeometric Analysis with NURBS,  Computer Methods in Applied Mechanics and Engineering, 200 pp. 1100-1112

J. Ma, P. Wriggers and W. Gao (2011): Dynamic optimization design of fuzzy-random truss structures based on the general dynamic reliability,  Computational Mechanics

J. Ma, W. Gao, P. Wriggers, J.J. Chen, S. Sahraee (2011): Structural dynamic optimal design based on the dynamic reliability,  Engineering Structures 33 (2)

I. Temizer, P. Wriggers (2010): An Adaptive Multiscale Resolution Strategy for the Finite Deformation Analysis of Microheterogeneous Structures,  Comput. Methods Appl. Mech. Engrg. v.200 p.2639-2661

J. Korelc, U. Šolinc and P. Wriggers (2010): An improved EAS brick element for finite deformation,  Computational Mechanics, 46, pp. 641-650

C. Weißenfels and P. Wriggers (2010): Numerical modeling of electrical contacts,  Computational Mechanics, 46, pp. 301-314

I. Temizer and P. Wriggers (2010): Inelastic analysis of granular interfaces via computational contact homogenization,  International Journal for Numerical Methods in Engineering, 84 pp. 883-915

I. Temizer and P. Wriggers (2010): A micromechanically motivated higher-order continuum formulation of linear thermal conduction,  ZAMM, 90 pp. 768-782

I. Temizer and P. Wriggers (2010): Thermal contact conductance characterization via computational contact homogenization: A finite deformation theory framework,  International Journal for Numerical Methods in Engineering, 83 pp. 24-58

Y. Cai, X. Zhuang, C. Augarde (2010): A new partition of unity finite element free from the linear dependence problem and processing the delta property ,  Computer Methods in Applied Mechanics & Engineering,

X. Zhuang, C. Augarde (2010): Aspects of the use of orthogonal basis functions in the element-free Galerkin method,  International Journal for Numerical Methods in Engineering

E. Lehmann, S. Loehnert, P. Wriggers (2010): Modelling Metals at Finite Deformation,  Proc. Appl. Math. Mech., 10 (1): 305-306

F. Maceri, M. Marino, G. Vairo (2010): A unified multiscale mechanical model for soft collagenous tissues with regular fiber arrangement,  Journal of Biomechanics 43:355-363
DOI: 10.1016/j.jbiomech.2009.07.040

S. Loehnert, L. Krstulovic-Opara, M. Vesenjak, D.S. Mueller-Hoeppe (2010): Homogenization principle based multi-scale modeling of cellular structures,  Journal of the Serbian Society for Computational Mechanics

J. Ma, W. Gao, P. Wriggers, T. Wu and S. Sahraee (2010): The analyses of dynamic response and reliability of fuzzy-random truss under stationary stochastic excitation,  Computational Mechanics, 45 pp. 443-455

R. A. Sauer (2009): A computational model for nanoscale adhesion between deformable solids and its application to gecko adhesion,,  J. Adhes. Sci. Technol., submitted

R. A. Sauer and P. Wriggers (2009): Formulation and analysis of a 3D finite element implementation for adhesive contact at the nanoscale,,  Comp. Meth. Appl. Mech. Engrg., DOI: 10.1016/j.cma.2009.08.019

R. A. Sauer (2009): Multiscale modeling and simulation of the deformation and adhesion of a single gecko seta,,  Comp. Meth. Biomech. Biomed. Engng., DOI: 10.1080/10255840902802917

T. Liu, G. Liu, P. Wriggers, S Zhu (2009): Study on Contact Characteristic of Nanoscale Asperities by Using Molecular Dynamic Simulations.,  Journal of Tribology, 131:022001-1-022001-10

T. Gerasimov, G. Sweers (2009): Regularity for a clamped grid equation u_xxxx+u_yyyy=f on a domain with a corner,  Electronic Journal DE, Vol. 2009 (2009), No. 47, pp. 1-54 | Datei |

B.A. Lau, R. Bader, A. Schneider, P.Wriggers (2009): Finite-element transient calculation of a bell struck by a clapper,  Concepts, Experiments, and Fieldwork: Studies in Systematic Musicology and Ethnomusicology, Peter Lang, December 2009

D.S. Mueller-Hoeppe, S. Loehnert, P. Wriggers (2009): A finite deformation brick element with inhomogeneous mode enhancement,  International Journal for Numerical Methods in Engineering, vol 78, pp. 1164 - 1187

M. Campo, G.A. Drosopoulos, G.E. Stavroulakis (2009): Unilateral Contact and Damage Analysis in Masonry Arches ,  Vietnam Journal of Mechanics, vol 31, pp. 185-190

P. Wriggers, B. Avci, S. Woltering (2009): Schwingungsreduktion einer Pontonanlage in Bremerhaven,  Bauingenieur

X. Li, Y. Cai and X. Zhuang, H. Zhu (2009): Design of permeable lining for high pressure hydraulic tunnel ,  Chinese Journal of Rock and Soil Mechanics

X. Zhuang, H. Zhu, Y. Cai (2009): High rock slope stability analysis using the meshless Shepard and least squares method ,  Analysis of dscontinuous deformation: new developments and applications

C.B. Hirschberger and P. Steinmann (2009): Classification of concepts in thermodynamically consistent generalized plasticity,  J. Eng. Mech., 135(3), 156–170, (2009).

C.B. Hirschberger, S. Ricker, P. Steinmann, N. Sukumar (2009): Computational multiscale modelling of heterogeneous material layers,  Engng. Fracture Mech., 76(6), 793–812, (2009).

P. Wriggers, J. Reinelt (2009): Multi-scale Approach for Frictional Contact of Elastomers on Rough Rigid Surfaces.,  Computer Methods in Applied Mechanics and Engineering, 198:1996-2008

R. A. Sauer and S. Li (2008): An atomistically enriched continuum model for nanoscale contact mechanics and its application to contact scaling,,  J. Nanosci. Nanotech., 8(7), pp. 3757-3773

R. A. Sauer, G. Wang and S. Li (2008): The composite Eshelby tensors and their application to homogenization,,  Acta Mech., 197, pp. 63-96

I. Temizer, P. Wriggers (2008): A Multiscale Contact Homogenization Technique for the Modeling of Third Bodies in the Contact Interface,  Computer Methods in Applied Mechanics and Engineering, 198:377-396 | Datei |

M. Hain, P. Wriggers (2008): Computational Homogenization of micro-structural Damage due to Frost in Hardened Cement Paste.,  Finite Elements in Analysis and Design, 44:223-244

Wriggers P., Siplivaya M., Joukova I., Slivin R. (2008): Intelligent support of the processing stage of engineering analysis using case-based reasoning.,  Engineering with Computers, 24:384-404

D. Sheng, H. Yamamoto, P. Wriggers (2008): Finite element analysis of enlarged end piles using frictional contact.,  Solids and Foundations, 48:1-14

G.A. Drosopoulos, G.E. Stavroulakis, C.V. Massalas (2008): Influence of the Geometry and the Abutments Movement on the Collapse of Stone Arch Bridges ,  Construction and Building Materials, vol 22, pp. 200-210.

M. Betti, G.A. Drosopoulos, G.E. Stavroulakis (2008): Two non-Linear Finite Element Models Developed for the Assessment of Failure of Masonry Arches ,  Comptes Rendus Mecanique, vol 336, pp. 42-53

J. Fang, H. Zhu, X. Zhuang (2008): Appraisal and analysis of three-dimensional slope stability based on elastic-plastic FEM,  Rock and Soil Mechanics

X. Zhuang, Y. Cai, H. Zhu, D. Zhou (2008): Rock slope stability analysis based on meshless method and shortest path algorithms ,  Chinese Quarterly of Mechanics

S. Löhnert, D. S. Mueller-Hoeppe (2008): Multiscale Methods for Fracturing Solids,  gacm Report

X. Zhuang, Y. Cai, H. Zhu (2008): An FEM modelling method for anchored slope stability analysis and discussions on anchoring effect ,  Chinese journal of Geotechnical Engineering

P. M. Pimenta, E. M. B. Campello, P. Wriggers (2008): An exact conserving algorithm for nonlinear dynamics with rotational DOFs and general hyperelasticity. Part 1: Rods.,  Computational Mechanics, 42:715-732

I. Temizer, P. Wriggers (2008): On the computation of the macroscopic tangent for multiscale volumetric homogenization problems,  Comput. Methods Appl. Mech. Engrg. 198, pp. 495-510 (doi:10.1016/j.cma.2008.08.018) | Datei | Weitere Informationen

I. Temizer, P. Wriggers (2008): On a Mass Conservation Criterion in Micro-to-Macro Transitions.,  Journal of Applied Mechanics, Trans. ASME, v.75 p.054503 | Datei | Weitere Informationen

E. Boerner, P. Wriggers (2008): A macro-element for incompressible finite deformations based on a volume averaged deformation gradient.,  Computational Mechanics, 42:407-416

M. Hain and P. Wriggers (2008): On the numerical homogenization of hardened cement paste,  Computational Mechanics, 42, pp. 197-212

O. Allix, U. Perego and P. Wriggers (2008): Special issue: Challenges in computationalmechanics,  Computational Mechanics, 42 pp. 145-146

P. Wriggers, G. Zavarise (2008): A formulation for frictionless contact problems using a weak form introduced by Nitsche.,  Computational Mechanics, 41:407-420

T. Belytschko, S. Loehnert and J.H. Song (2008): Multiscale Aggregating Discontinuities: A Method for Circumventing Loss of Material Stability,  Int. J. Numer. Meth. Engng., 73, pp. 869 - 894

S. Löhnert and P. Wriggers (2008): Effective Behaviour of Elastic Heterogeneous Thin Structures at Finite Deformations,  Computational Mechanics, 41, pp. 595 - 606

C. Wellmann, C. Lillie and P. Wriggers (2008): Comparison of the macroscopic behavior of granular materials modeled by different constitutive equations on the microscale,  Finite Elements in Analysis and Design, Vol. 44(5), pp. 259-271 | Datei | Weitere Informationen

C. Wellmann, C. Lillie and P. Wriggers (2008): A Contact Detection Algorithm for Superellipsoids based on the Common-Normal Concept ,  Engineering Computations, 25(5), pp. 432-442 | Datei | Weitere Informationen

C.B. Hirschberger, N. Sukumar, P. Steinmann, (2008): Computational homogenization of material layers with micromorphic mesostructure,  Phil. Mag., 88(30–32), 3603–3631, (2008)

C. Wellmann, C. Lillie and P. Wriggers (2008): Homogenization of granular material modeled by a three-dimensional Discrete Element Method,  Computers and Geotechnics, 35(3), pp. 394-405 | Datei | Weitere Informationen

S. Li, G. Wang and R. A. Sauer (2007): The Eshelby tensors in a finite spherical domain: II. Applications in homogenization,,  J. Appl. Mech., 74, pp. 784-797

S. Li, R. A. Sauer and G. Wang (2007): The Eshelby tensors in a finite spherical domain: I. Theoretical formulations,,  J. Appl. Mech., 74, pp. 770-783

R. A. Sauer and S. Li (2007): An atomic interaction-based continuum model for adhesive contact mechanics,,  Finite Elem. Anal. Des., 43(5), pp. 384-396

R. A. Sauer and S. Li (2007): A contact mechanics model for quasi-continua,,  Int. J. Numer. Meth. Engrg., 71(8), pp. 931-962

E. M. B. Campello, P. M. Pimenta, P. Wriggers (2007): Elastic-plastic analysis of metallic shells at finite strains.,  Rem-Revista Escola de Minas, 60:381-389

Wriggers P., Siplivaya M., Joukova I., Slivin R. (2007): Intelligent support of engineering analysis using ontology and case-based reasoning.,  Engineering Application of Artificial Intelligence, 20:709-720

P. Wriggers, M. Hain (2007): Frostschädigung von Zementstein.,  Bauingenieur, 82:479-486

D. Sheng, P. Wriggers, S. W. Sloan (2007): Application of Frictional Contact in Geotechnical Engineering.,  International Journal of Geomechanics, :176-185

G.A. Drosopoulos, G.E. Stavroulakis, C.V. Massalas (2007): FRP Reinforcement of Stone Arch Bridges: Unilateral Contact Models and Limit Analysis,  Composites Part B: Engineering, vol 38, pp. 144-151

D. Fressmann, P. Wriggers (2007): Advection Approaches for single- and multi-level materials: Arbitrary Lagrangian-Eulerian finite element procedures.,  Computational Mechanics, 39:153-190

J. Fang, Y. Lin, X. Zhuang (2007): A study on integrated technique with root pile and bag-form concrete in dealing with underwater slope ,  Chinese Journal of Underground Space and Engineering

K. Krabbenhoft, A. V. Lyamin, S. W. Sloan, P. Wriggers (2007): An interior-point algorithm for elastoplasticity.,  International Journal for Numerical Methods in Engineering, 69:592-626

I. Temizer, P. Wriggers (2007): An adaptive method for homogenization in orthotropic nonlinear elasticity,  Computer Methods in Applied Mechanics and Engineering, 196:3409-3423 | Datei |

I. Temizer, T. I. Zohdi (2007): A numerical method for homogenization in non-linear elasticity,  Computational Mechanics, 40 (2):281-298 (doi: 10.1007/s00466-006-0097-y) | Datei | Weitere Informationen

S. Loehnert and T. Belytschko (2007): Crack shielding and amplification due to multiple microcracks interacting with a macrocrack,  International Journal of Fracture, 145, pp. 1 - 8

E. Boerner, S. Loehnert, P. Wriggers (2007): A new finite element based on the theory of a Cosserat point - extension to initially distorted elements for 2D plane strain.,  Int. J. Numer. Meth. Engng., 71, 454 - 472

E. Boerner, S. Loehnert, P. Wriggers (2007): A new finite element based on the theory of a Cosserat point - extension to initially distorted elements for 2D plane strain.,  International Journal for Numerical Methods in Engineering, 71:454-472

S. Loehnert and T. Belytschko (2007): A Multiscale Projection Method for Macro/Microcrack Simulations,  Int. J. Numer. Meth. Engng., 71, 1466 - 1482

C.B. Hirschberger, E. Kuhl, P. Steinmann (2007): On deformational and configurational mechanics of micromorphic hyperelasticity - theory and computation,  Comput. Methods. Appl. Mech. Engrg., 196, 4027–4044, (2007)

P. Wriggers, K. Chavan (2006): Beam and Shell Elements for Thin-walled Aluminium Structures.,  Foundations of Civil and Environmental Engineering, 7:397-412

D. Sheng, P. Wriggers, S. W. Sloan (2006): Improved numerical algortihms for frictional contact in pile penetration analysis.,  Computers and Geotechnics, 33:341-354

P. Wriggers, S. O. Moftah (2006): Mesoscale models for concrete: Homogenization and damage behaviour.,  Finite Element Analysis and Design, 42:623-636

G.A. Drosopoulos, G.E. Stavroulakis, C.V. Massalas (2006): Limit Analysis of a Single Span Masonry Bridge with Unilateral Frictional Contact Interfaces,  Engineering Structures, vol 28, pp. 1864-1873

K. A. Fischer, P. Wriggers (2006): Mortar based frictional contact formulation for higher order interpolations using the moving friction cone.,  Computer Methods in Applied Mechanics and Engineering, 195:5020-5036

G. Wang, S. Li and R. Sauer (2005): A circular inclusion in a finite domain: II. The Neumann-Eshelby problem,,  Acta Mech., 179(1-2), pp. 91-110

S. Li, R. Sauer and G. Wang (2005): A circular inclusion in a finite domain: I. The Dirichlet-Eshelby problem,,  Acta Mech., 179(1-2), pp. 67-90

S. Loehnert, E. Boerner, M. Rubin, P. Wriggers (2005): Response of a nonlinear elastic general Cosserat brick element in simulations typically exhibiting locking and hourglassing.,  Computational Mechanics, 36:255-265

M. Andre, P. Wriggers (2005): Thermomechanical behaviour of rubber materials during vulcanization.,  International Journal of Solids & Structures, 42:4758-4778

T. Raible, K. Tegeler, S. Loehnert, P. Wriggers (2005): Development of a wrinkling algorithm for orthotropic membrane materials.,  Computer Methods in Applied Mechanics and Engineering, 194:2550-2568

P. Wriggers (2005): Buchbesprechung: Kontinuums- und Kontaktmechanik von K. Willner.,  Technische Mechanik

D. Boso, P. Litewka, B. A. Schrefler, P. Wriggers (2005): A 3D beam-to-beam contact finite element for coupled electric-mechanical fields.,  International Journal for Numerical Methods in Engineering, 64:1800-1815

M. Hain, P. Wriggers (2005): Mikrostruktursimulation von Zementstein.,  Bauingenieur, 80:313-319

D. Sheng, K. D. Eigenbrod, P. Wriggers (2005): Finite element analysis of pile installation using large-slip frictional contact.,  Computers and Geotechnics, 32:17-26

K. A. Fischer, P. Wriggers (2005): Frictionless 2D Contact formulations for finite deformations based on the mortar method.,  Computational Mechanics, 36:226-244

I. Temizer, T. I. Zohdi (2005): Agglomeration and refragmentation in microscale granular flows,  International Journal of Fracture, 131 (3):L37-L44 (doi: 10.1007/s10704-005-2598-7) | Datei | Weitere Informationen

H. W. Zhang, H. Wang, P. Wriggers, B. A. Schrefler (2005): A finite element model for contact analysis of multiple Cosserat bodies.,  Computational Mechanics, 36:444-458

A. Soroushian, P. Wriggers and J. Farjoodi (2005): On practical integration of semi-discretized nonlinear equations of motion. Part 1: Reasons for probable instability and improper convergence,  Journal of Sound and Vibration, 284, pp. 705-731

F. Liu, P. Wriggers, L. Li (2004): Wear simulation based on node-to-segment element.,  Key Engineering Materials, 274-276:577-582

P. Wriggers, L. Krstulovic-Opara (2004): The Moving Friction Cone approach for three-dimensional contact simulations.,  International Journal of Computational Methods, 1:105-119

K. Chavan, P. Wriggers (2004): Consistent Coupling of Beam and Shell Models for Thermo-elastic Analysis.,  International Journal for Numerical Methods in Engineering, 59:1861-1878

P. Wriggers (2004): Book Review: S. Mohammadi, Discontinuum Mechanics using Finite and Discrete Elements.,  ZAMM, 84:774

Bandeira, A. A., P. Wriggers, P. de Mattos Pimenta (2004): Homogenization methods leading to interface laws of contact mechanics.,  International Journal for Numerical Methods in Engineering, 59:173-195

J. Nettingsmeier, P. Wriggers (2004): Frictional contact of elastomer materials on rough rigid surfaces.,  PAMM, 4:360-361

A. Rieger, P. Wriggers (2004): Adaptive methods for thermo-mechanical contact problems.,  International Journal for Numerical Methods in Engineering, 58:871-894

P. M. Pimenta, E. M. B. Campello, P. Wriggers (2004): A fully nonlinear multi-parameter shell model with thickness variation and a triangular shell finite element formulation.,  Computational Mechanics, 34:181-193

H. W. Zhang, S. Y. He, X. S. Li, P. Wriggers (2004): A new algorithm for numerical solution of 3d elastoplastic contact problems with orthotropic friction law.,  Computational Mechanics, 34:1-14

A.A. Bandeira, P. Wriggers and P. de Mattos Pimenta (2004): Homogenization methods leading to interface laws of contact mechanics,  International Journal for Numerical Methods in Engineering, 59, pp. 173-195

P. Wriggers and G. Zavarise (2004): Computational Contact Mechanics,  Encyclopedia of Computational Mechanics, eds. E. Stein, R. de Borst and T. J. R. Hughes, Wiley, Chichester

P. Wriggers and L. Krstulovic-Opara (2004): The moving friction cone approach for three dimensional contact simulations,  Journal of Computational Methods 1 pp.115-119

P. Wriggers, E. Stein (2004): Multi-Skalen Methoden und Modelladaptivität bei der Berechnung von komplexen Strukturen.,  Bauingenieur, :497-505

C. Sansour, P. Wriggers, J. Sansour (2004): On the design of energy-momentum integration schemes for arbitrary continuum formulations. Applications to classical and chaotic motion of shells.,  International Journal for Numerical Methods in Engineering, 60:2419-2440

H. Tschöpe, E. Onate, P. Wriggers (2003): Direct Computation of instability points with inequality constraints using FEM.,  Engineering Computation, 5/6:611-628

H. Tschöpe, P. Wriggers, E. Onate (2003): Direct computation of instability points for contact problems.,  Computational Mechanics, 31:173-178

N. Krstulovic-Opara, J. Nau, P. Wriggers, L. Krstulovic-Opara (2003): Auto-adaptive composite structures with self-actuating SMA-HPFRCC fuses.,  International Journal of Computer-Aided Civil and Infrastructural Engineering, 18:78-94

A. Rieger, P. Wriggers (2003): Comparison of Different Error Indicators for Contact Problems Involving Large Elastic Strains.,  Applicable Analysis, 82:575-601

S. Löhnert, P. Wriggers (2003): Homogenization of micro-heterogeneous materials considering interfacial delamination at finite strains.,  Technische Mechanik, 23:167-177

H. W. Zhang, B. Schrefler, P. Wriggers (2003): Interaction between different internal length scales for strain localization analysis of single phase materials.,  Computational Mechanics, 30:212-219

E. M. B. Campello, P. M. Pimenta, P. Wriggers (2003): A triangular finte shell element based on a fully nonlinear shell formulation.,  Computational Mechanics, 31:505-518

T. Raible, S. Loehnert, K. Tegeler, P. Wriggers (2003): Analysis wrinkling states in membranes.

P. Wriggers, A. Haraldsson (2003): A simple formulation for two-dimensional contact problems using a moving friction cone.,  Communications in Numerical Methods in Engineering, 19:285-295

C. Sansour, P. Wriggers, J. Sansour (2003): A finite element post-processed Galerkin method for dimensional reduction in the nonlinear dynamics of solids. Applications to shells.,  Computational Mechanics, 32:104-114

A. Soroushian, P. Wriggers, J. Farjoodi (2003): A practical upper-bound on errors associated with Richardson extrapolation and its application in time integration analysis.,  comstr

H. Tschöpe and E. Onate and P. Wriggers (2003): Comparison of the Critical Displacement Method and the Extended System for critical point computations,  EngineeringComputation, 5/6, pp. 611-628

P. Wriggers (2002): Rechnergestütztes Materialdesign.,  Braunschweigisch Wissenschaftliche Gesellschaft, Jahrbuch 2001, :61-64

P. Litewka, P. Wriggers (2002): Contact between 3D-beams with rectangular cross section.,  International Journal for Numerical Methods in Engineering, 53:2019-2042

L. Krstulovic-Opara, P. Wriggers, J. Korelc (2002): A C1-continuous formulation for 3D finite deformation frictional contact.,  Computational Mechanics, 29:27-42

P. Litewka, P. Wriggers (2002): Frictional Contact between 3D-beams with rectangular cross section.,  Computational Mechanics, 28:26-39

C. Sansour, W. Wagner, P. Wriggers, J. Sansour (2002): An energy-momentum integration scheme and enhanced strain finite elements for the non-linear dynamics of shells.,  Non-Linear Mechanics, 37:951-966

G. D. Hu, P. Wriggers (2002): On the adaptive finite element method of steady-state rolling contact for hyperelasticity in finite deformations.,  Computer Methods in Applied Mechanics and Engineering, 191:1333-1348

C. S. Han, P. Wriggers (2002): On the error indication of shells in unilateral fricionless contact.,  Computational Mechanics, 28:169-176

L. Krstulovic-Opara, P. Wriggers, J. Korelc (2001): Rolling contact simulations with frictional contact elements using Lagrangian description.,  Zeitschrift für angewandte Mathematik und Mechanik, 81:S397-S398

P. Wriggers, L. Krstulovic-Opara, J. Korelc (2001): Smooth C1- interpolations for two-dimensional frictional contact problems.,  International Journal for Numerical Methods in Engineering, 51:1469-1495

T. I. Zohdi, P. Wriggers (2001): Computational micro-macro material testing.,  Archives of Computational Methods in Engineering, 8:131-228

T. Zohdi, P. Wriggers (2001): Aspects of the computational testing of the mechanical properties of microheterogeneous material samples.,  International Journal for Numerical Methods in Engineering, 50:2573-2599

E. Onate, H. Tschöpe, P. Wriggers (2001): Combination of the critical displacement method with a damage model for structural instability analysis.,  Engineering Computation, 18:642-662

S. H. Lee, C. S. Han, S. I. Oh, P. Wriggers (2001): Comparative crash simulations incorporating the results of sheet forming analyses.,  Engineering Computations, 18:744-758

T. Zohdi, P. Wriggers (2001): Modeling and simulating of the decohesion of particulate aggregates in a binding matrix.,  Engineering Computations, 18:79-95

T. Zohdi, P. Wriggers (2001): A consistent Petrov-Galerkin transformation that eliminates spurious oscillations for heterogeneous diffusion-reaction equations.,  Computational Material Science

A. Rieger, P. Wriggers (2001): Adaptive methods for frictionless contact problems.,  Computers and Structures, 79:2197-2208

A. Haraldsson, P. Wriggers (2001): A strategy for numerical testing of frictional laws with application to contact between soil and concrete.,  Computer Methods in Applied Mechanics and Engineering, 190:963-978

T. Zohdi, P. Wriggers, C. Huet (2001): A method of substructuring large-scale computational micromechanical problems.,  Computer Methods in Applied Mechanics and Engineering, 190:5639-5656

T. Zohdi, P. Wriggers (2001): A model for simulating the detioration of structural-scale material responses of microheterogeneous solids.,  Computer Methods in Applied Mechanics and Engineering, 190:2803-2824

P. Wriggers, L. Krstulovic-Opara (2000): On Smooth Finite Element Discretization for Frictional Contact Problems.,  Zeitschrift für angewandte Mathematik und Mechanik, 80,S1:77-80

T. I. Zohdi, P. Wriggers (2000): Phenomenological modeling and numerical simulation of the environmental degradation of multiphase engineering materials.,  Archive of Applied Mechanics, 70:47-64

H. Braess, P. Wriggers (2000): Arbitrary Lagrangian Eulerian finite element analysis of free surface flows.,  Computer Methods in Applied Mechanics and Engineering, 190:95-110

G. Zavarise, P. Wriggers (2000): Contact with friction between beams in 3-D space.,  International Journal for Numerical Methods in Engineering, 49:977-1006

T. I. Zohdi, P. Wriggers (2000): A computational model for interfacial damage through microstructural cohesive zone relaxation.,  The International Journal of Fracture, 101:L9-L14

P. Wriggers, A. Rieger, O. Scherf (2000): Comparison of different error measures for adaptive finite element techniques applied to contact problems involving large elastic strains.,  Computer Methods in Applied Mechanics and Engineering

Hu, G. D., Panagiotopoulos, P. D., Panagouli, O., Scherf, O., Wriggers, P. (2000): Adaptive Finite Element Analysis of Fractal Interfaces in Contact Problems.,  Computer Methods in Applied Mechanics and Engineering, 182:17-38

S. Reese, P. Wriggers (2000): A new stabilization concept for finite elements in large deformation problems.,  International Journal for Numerical Methods in Engineering, 48:79-110

S. Reese, P. Wriggers, B. D. Reddy (2000): A new locking-free brick element technique for large deformation problems in elasticity.,  Computers and Structures, 75:291-304

T. I. Zohdi, P. Wriggers (2000): On the sensitivity of homogenized material responses at infinitesimal and finite strains.,  Communications in Numerical Methods in Engineering, 16:657-670

T. Zohdi, P. Wriggers (1999): Microstructural decomposition error estimates.,  Zeitschrift für angewandte Mathematik und Mechanik, 79:155-158

R. Eberlein, P. Wriggers (1999): Finite Element Concepts for Finite Elastoplastic Strains and Isotropic Stress Response in Shells: Theoretical and Computational Analysis.,  Computer Methods in Applied Mechanics and Engineering, 171:243-279

C. Carstensen, O. Scherf, P. Wriggers (1999): Adaptive finite elements for elastic bodies in contact.,  SIAM Journal of Scientific Computing, 20:1605-1626

T. I. Zohdi, K. Hutter, P. Wriggers (1999): A technique to describe the macroscopic pressure dependence of diffusive properties of solid materials containing heterogeneities.,  Computational Materials Science, 15:69-88

G. Zavarise, P. Wriggers (1999): A superlinear convergent augmented Lagrangian procedure for contact problems.,  Engineering Computations, 16:88-119

T. Zohdi, P. Wriggers (1999): A domain decomposition method for bodies with heterogeneous microstructure based on material regularization.,  International Journal of Solids & Structures, 136:2507-2527

T. I. Zohdi, P. Wriggers (1999): On the effects of microstress on macroscopic diffusion processes.,  Acta Mechanica, 136:91-107

S. Reese, P. Wriggers (1998): Thermoviscoelastic material behaviour at finite deformations with temperature-dependent material parameters.,  Zeitschrift für angewandte Mathematik und Mechanik, 78

P. Wriggers, O. Scherf (1998): Different a posteriori error estimators and indicators for contact problems.,  Mathematics and Computer Modelling, 28:437-447

P. Wriggers, G. Zavarise, T. Zohdi (1998): A computational study of interfacial debonding damage in fibrous composites materials.,  Computational Materials Science, 12:39-56

R. Eberlein, P. Wriggers (1998): On the Calculation of Finite Plastic Strains in Shell Intersections with Finite Elements.,  Technische Mechanik, 18:181-188

S. Reese, M. Kussner, B. D. Reddy, P. Wriggers (1998): Eine neue Stabilisierungstechnik fur finite Elemente in der finiten Elastizitat.,  Zeitschrift für angewandte Mathematik und Mechanik, 78

P. Wriggers, O. Scherf (1998): Adaptive finite element techniques for frictional contact problems involving large elastic strains.,  Computer Methods in Applied Mechanics and Engineering, 151:593-603

C. S. Han, P. Wriggers (1998): A simple local a posteriori bending indicator for axisymmetrical membrane and bending shell elements.,  Engineering Computations, 15:977-988

G. Zavarise, P. Wriggers (1998): A segment-to-segment contact strategy.,  Mathematics and Computer Modelling, 28:497-515

G. Zavarise, P. Wriggers, B. A. Schrefler (1998): A method for solving contact problems.,  International Journal for Numerical Methods in Engineering, 42:473-498

P. Wriggers, A. Boersma (1998): A parallel algebraic multigrid solver for problems in solid mechanics discretized by finite elements.,  Computers and Structures, 69:129-137

T. Zohdi, M. Feucht, D. Gross, P. Wriggers (1998): A description of macroscopic damage through microstructural relaxation.,  International Journal for Numerical Methods in Engineering, 143:493-506

P. Wriggers, G. Zavarise (1997): On contact between three-dimensional beams undergoing large deflections.,  Communications in Applied Numerical Methods, 13:429-438

A. Haraldsson, C. S. Han, H. Tschöpe, P. Wriggers (1997): Shape optimization of a lubricated journal bearing with regard to the distribution of pressure in the fluid.,  Engineering Optimization, 29:259-275

S. Reese, P. Wriggers (1997): Material Instabilities of an Incompressible Elastic Cube under Triaxial Tension.,  International Journal of Solids & Structures, 34:3433-3454

A. Boersma, P. Wriggers (1997): An algebraic multigrid solver for finite element computations in solid mechanics.,  Engineering Computations, 14:202-215

E. Kirchner, S. Reese, P. Wriggers (1997): A finite element method for plane stress problems with large elasto-plastic deformations.,  Communications in Applied Numerical Methods, 13:963-976

S. Reese, P. Wriggers (1997): A material model for rubber-like polymers exhibiting plastic deformation: computational aspects and a comparison with experimental results.,  Computer Methods in Applied Mechanics and Engineering, 148:279-298

S. Meynen, A. Boersma, P. Wriggers (1997): Application of a parallel algebraic multigrid method for the solution of elasto-plastic shell problems.,  Numerical Linear Algebra with Application, 4:223-238

C. Carstensen, P. Wriggers (1997): On the Symmetric boundary element method and the symmetric coupling of boundary elements and finite elements.,  IMA J. Num. Analysis, 17:201-238

C. Sansour, P. Wriggers, J. Sansour (1997): Nonlinear Dynamics of Shells: Theory, Finite Element Formulation and Integration Schemes.,  Nonlinear Dynamics, 13:279-305

C. Leppin, P. Wriggers (1996): Numerical Simulation of Rapid Crack Propagation in Viscoplastic Materials.,  Computers and Structures, 61:1169-1175

P. Wriggers (1996): On Finite Element Methods for Contact Problems with Friction.,  Tribology International, 29:651-658

C. Sansour, J. Sansour, P. Wriggers (1996): A Finite Element Approach to the Chaotic Motion of Geometrically Exact Rods undergoing Plane Deformations.,  Nonlinear Dynamics, 11:189-212

J. Korelc, P. Wriggers (1996): Consistent gradient formulation for a stable enhanced strain method for large deformations.,  Engineering Computations, 13:103-123

P. Wriggers, U. Hueck (1996): A Formulation of the Enhanced QS6-Element for Large Elastic Deformations.,  International Journal for Numerical Methods in Engineering, 39:3039-3053

P. Wriggers, R. Eberlein, S. Reese (1996): Comparison between Shell and 3D-Elements in Finite Plasticity.,  International Journal of Solids & Structures, 33:3309-3326

J. Korelc, P. Wriggers (1996): Improved enhanced strain 3-D element with Taylor expansion of shape functions.,  Computational Mechanics, 19:30-40

G.A. Holzapfel, R. Eberlein, P. Wriggers, H.W. Weizsäcker (1996): Large strain analysis of soft biological and rubber-like membranes: Formulation and finite element analysis.,  Computer Methods in Applied Mechanics and Engineering, 132:45-61

S. Reese, P. Wriggers (1996): Finite element calculation of the stability behaviour of hyperelastic solids with the enhanced strain method.,  Zeitschrift für angewandte Mathematik und Mechanik, 76:415-416

P. Wriggers, S. Reese (1996): A note on enhanced strain methods for large deformations.,  Computer Methods in Applied Mechanics and Engineering, 135:201-209

G.A. Holzapfel, R. Eberlein, P. Wriggers, H.W. Weizsäcker (1996): A new axisymmetrical membrane element for anisotropic, finite strain analysis of arteries.,  Communications in Applied Numerical Methods, 12:507-517

G. Zavarise, P. Wriggers (1996): On the Efficiency of New and Old Strategies for Solving Contact Problems.,  Zeitschrift für angewandte Mathematik und Mechanik, 76:563-564

P. Wriggers, J.Korelc (1996): On enhanced strain methods for small and finite deformations of solids.,  Computational Mechanics, 18:413-428

G. Zavarise, P. Wriggers, B. A. Schrefler (1995): On Augmented Lagrangian Algorithms for Thermomechanical Contact Problems with Friction.,  International Journal for Numerical Methods in Engineering, 38:2929-2949

M. Küssner, P. Wriggers (1995): On consistent strain methods for nonlinear problems.,  Proceedings of Conference

L. Bernspang, M. Küssner, P. Wriggers, A. Samuelson (1995): The consistent strain method in finite element plasticity.,  Computers and Structures, 54:27-33

M. Küssner, P. Wriggers (1995): Zur numerischen Lösung plastischer Probleme mit Elementen niederer Ordnung.,  Zeitschrift für angewandte Mathematik und Mechanik

S. Reese, P. Wriggers (1995): Stabilitätsverhalten von Gummi in Anhängigkeit von den Material- parametern und der Belastung.,  Zeitschrift für angewandte Mathematik und Mechanik, 75:T167-T168

U. Hueck, P. Wriggers (1995): A Formulation for the Four-Node Quadrilateral Element, Part I: Plane Element.,  International Journal for Numerical Methods in Engineering, 38:3007-3037

P. Wriggers (1995): Finite Element Algorithms for Contact Problems.,  Archive of Computational Methods in Engineering, 2:1-49

P. Wriggers, O. Scherf, C. Carstensen (1995): An adaptive finite element model for frictionless contact problems.,  Zeitschrift für angewandte Mathematik und Mechanik, 75:T37-T40

P. Wriggers, O. Scherf (1995): An adaptive finite element for contact problems in plasticity.,  Computational Mechanics, 17:88-97

P. Wriggers, R. Eberlein, F. Gruttmann (1995): An Axisymmetrical Quasi-Kirchhoff-Type Shell Element for Large Plastic Deformations.,  Archiv of Applied Mechanics, 65:465-477

S. Reese, P. Wriggers (1995): A finite element method for stability problems in finite elasticity.,  International Journal for Numerical Methods in Engineering, 38:1171-1200

U. Hueck, H.L. Schreyer, P. Wriggers (1995): On the Incompressibility constraint of the Four-Node Quadrilateral Element.,  International Journal for Numerical Methods in Engineering, 38:3039-3053

S. Reese, P. Wriggers (1994): Stabilitätsverhalten von nichtlinear elastischen Werkstoffen.,  Zeitschrift für angewandte Mathematik und Mechanik, 74:T51-T53

U. Hueck, B.D. Reddy, P. Wriggers (1994): On the Stabilization of the rectangular four-node quadrilateral element.,  Communications in Applied Numerical Methods, 10:555-563

C. Carstensen, P. Wriggers (1993): On Perturbation Behaviour in Nonlinear Dynamics.,  Communications in Applied Numerical Methods, 9:165-175

P. Wriggers, S. Reese (1993): Thermoelastische Stabilität von Fachwerken mit vollständiger thermomechanischer Kopplung und temperaturabhängigen Materialwerten.,  Zeitschrift für angewandte Mathematik und Mechanik, 73:T144-T147

P. Wriggers, G. Zavarise (1993): Thermomechanical Contact - A Rigorous but Simple Numerical Approach.,  Computers and Structures, 46:47-53

P. Wriggers, F. Gruttmann (1993): Thin shells with Finite Rotations formulated in Biot Stresses Theory and Finite-Element-Formulation.,  International Journal for Numerical Methods in Engineering, 36:2049-2071

R. Eberlein, P. Wriggers, R.L. Taylor (1993): A Fully Non-Linear Axisymmetrical Quasi-Kirchhoff-Type Shell Element for Rubberlike Materials.,  International Journal for Numerical Methods in Engineering, 36:4027-4043

F. Gruttmann, W. Wagner, L. Meyer, P. Wriggers (1993): A Nonlinear Composite Shell Element with Continuous Interlaminar Shear Stresses.,  Computational Mechanics, 13:175-188

P. Wriggers, M. Imhof (1993): On the Treatment of Nonlinear Unilateral Contact Problems.,  Ing. Archiv, 63:116-129

P. Wriggers, G. Zavarise (1993): On the Application of Augmented Lagrangian Techniques for Nonlinear Constitutive Laws in Contact Interfaces.,  Communications in Applied Numerical Methods, 9:815-824

N. Müller-Hoeppe, P. Wriggers (1992): Numerical Integration of Viscoplastic Material Laws at Large Strains with Application to Impact Problems.,  Computers and Structures, 45:165-171

G. Zavarise, P. Wriggers, E. Stein, B.A. Schrefler (1992): Real Contact Mechanisms and Finite Element Formulation - A Coupled Thermomechanical Approach.,  International Journal for Numerical Methods in Engineering, 35:767-786

P. Wriggers, C. Miehe, M. Kleiber, J.C. Simo (1992): A Thermomechanical Approach to the Necking Problem.,  International Journal for Numerical Methods in Engineering, 33:869-883

G. Zavarise, P. Wriggers, E. Stein, B.A. Schrefler (1992): A Numerical Model for Thermomechanical Contact based on Microscopic Interface Laws.,  Mech. Res. Comm., 19:173-182

F. Gruttmann, W. Wagner, P. Wriggers (1992): A Nonlinear Quadrilateral Shell Element with Drilling Degrees of Freedom.,  Ingenieur Archiv, 62:474-486

P. Wriggers, C. Carstensen (1992): An Efficient Algorithm for the Computation of Stability Points of Dynamical Systems under Step Load.,  Engineering Computations, 9:669-679

P. Wriggers, S. Reese (1992): Thermoelastic Stability of Trusses with Temperature Dependent Constitutive Relations.,  International Journal for Numerical Methods in Engineering, 35:1891-1906

J.C. Simo, R.L. Taylor, P. Wriggers (1991): A Note on Finite Element Implementation of Pressure Boundary Loading.,  Communications in Applied Numerical Methods, 7:513-525

E. Stein, W. Wagner, P. Wriggers (1990): Nonlinear Stability Analysis of Shell- and Contact-Problems including Branch-Switching.,  Computational Mechanics, 5:428-446

P. Wriggers, J.C. Simo (1990): A General Procedure for the Direct Computation of Turning and Bifurcation Points.,  International Journal for Numerical Methods in Engineering, 30:155-176

P. Wriggers, T. Vu Van, E. Stein (1990): Finite-Element-Formulation of Large Deformation Impact- Contact -Problems with Friction.,  Computers and Structures, 37:319-333

P. Wriggers, R.L. Taylor (1990): A fully nonlinear axisymmetrical membrane element for rubberlike materials.,  Engineering Computations, 7:303-310

W. Wagner, P. Wriggers (1989): Ein quadratisch konvergentes Verfahren zur Berechnung von Stabilitätspunkten.,  Zeitschrift für angewandte Mathematik und Mechanik, 69:T219-222

E. Stein, P. Wriggers (1989): Computational Mechanics im Bereich der Festkörper- und Strukturmechanik unter Verwendung der Finite-Element-Methode.,  GAMM-Mitteilungsheft 2

P. Wriggers, N. Tarnow (1989): Interaktive Steuerung von nichtlinearen Finite-Element- Algorithmen mittels eines Expertensystems.,  Bauingenieur, 64:57-65

F. Gruttmann, E. Stein, P. Wriggers (1989): Theory and Numerics of Thin Elastic Shells with Finite Rotations.,  Ing. Archiv, 59:54-67

E. Stein, C. Miehe, R. Mahnken, U. Heemann, P. Wriggers (1988): Thermomechanische Probleme in der Strukturmechanik.,  Zeitschrift der Universität Hannover, 2:8-19

P. Wriggers, E. Stein (1988): Die Verwendung von LIE-Ableitungen bei der Angabe von Spannungsflüssen für große Deformationen.,  Zeitschrift für angewandte Mathematik und Mechanik, 68:T264-T267

W. Wagner, P. Wriggers (1988): A Simple Method for the Calculation of Secondary branches.,  Engineering Computations, 5:103-109

P. Wriggers, W. Wagner, C. Miehe (1988): A Quadratically Convergent Procedure for the Calculation of Stability Points in Finite Element Analysis.,  Computer Methods in Applied Mechanics and Engineering, 70:329-347

P. Wriggers, W. Wagner (1988): Konzepte zur Integration von Entwurf, Konstruktion, Berechnung und Ausführung.,  Baukultur, 1:10-11

K.-D. Klee, P. Wriggers (1988): Finite-Elemente-Methode, Ein Konstruktionhilfsmittel für Bauingenieure.,  Baukultur, 1:7-9

P. Wriggers, T. vu Van (1987): Zur Berechnung von Stoßvorgängen unter Berücksichtigung von geometrisch und physikalisch nichtlinearem Verhalten.,  Zeitschrift für angewandte Mathematik und Mechanik, 67:T134-T137

B. Nour-Omid, P. Wriggers (1987): A Note on the Optimum Choice for Penalty Parameters.,  Communications in Applied Numerical Methods, 3:581-585

S. Clemens, P. Kroll, E. Stein, W. Wagner, P. Wriggers (1987): Experimental Studies on the Disappearence of Subretinal Fluid after Episcleral Buckling Procedures without Drainage.,  Graefes Arch. Clin. Exp. Opthalmol., 225:16-18

P. Wriggers, W. Wagner, E. Stein (1987): Algorithms for Nonlinear Contact Constraints with Application to Stability Problems of Rods and Shells.,  Computational Mechanics, 2:215-230

J.C. Simo, P. Wriggers, K.-H. Schweizerhof, R.L. Taylor (1986): Postbuckling Analysis involving Inelasticity and Unilateral Constraints.,  International Journal for Numerical Methods in Engineering, 23:779-800

K. Schweizerhof, P. Wriggers (1986): Consistent Linearization for Path Following Methods in Nonlinear FE-Analysis.,  Computer Methods in Applied Mechanics and Engineering, 59:261-279

G. Griebenow, P. Wriggers, K.-D. Klee (1986): EDV-unterstützte Standsicherheitsnachweise (Probleme mit der Computerstatik und Lösungswege.,  Bauingenieur, 61:455-458

B. Nour-Omid, P. Wriggers (1986): A Two-Level Iterative Method for the Solution of Contact Problems.,  Computer Methods in Applied Mechanics and Engineering, 54:131-144

E. Stein, P. Wriggers (1985): Der Einsatz von Mikrorechnern im Ingenieuralltag.,  Bauingenieur, 60:247-250

J. C. Simo, P. Wriggers, R. L. Taylor (1985): A Perturbed Lagrangian Formulation for the Finite Element Solution of Contact Problems.,  Computer Methods in Applied Mechanics and Engineering, 50:163-180

P. Wriggers, J.C. Simo (1985): A Note on Tangent Stiffnesses for Fully Nonlinear Contact Problems.,  Communications in Applied Numerical Methods, 1:199-203

P. Wriggers, W. Wagner (1985): Kurvenverfolgungsalgorithmen in der Strukturmechanik.,  Forschungs- und Seminarberichte aus dem Bereich der Mechanik der Universität Hannover, Bericht Nr. S 85/3

K.-D. Klee, P. Wriggers (1984): On an Updated Lagrangian Formulation for Divergent Solution of Timoshenko Beams subjected to Circulatory Load.,  Mech. Res. Comm., 10:239-244

K.-D. Klee, P. Wriggers (1984): Traglastberechnung ebener Stabtragwerke bei großen Verschiebungen und Verdrehungen.,  Zeitschrift für angewandte Mathematik und Mechanik, 64:T288-T290

P. Wriggers, K.-D. Klee (1984): Zur Berechnung von Stäben unter nicht-konservativer Belastung mit Hilfe eines inkrementellen Arbeitsprinzipes.,  Zeitschrift für angewandte Mathematik und Mechanik, 64:T322-T324

E. Stein, P. Wriggers (1984): Stability of Rods with Unilateral Constraints, a Finite Element Solution.,  Computers and Structures, 19:205-211

P. Wriggers (1982): Zur Berechnung von Stoßvorgängen zwischen Kugelschalen.,  Zeitschrift für angewandte Mathematik und Mechanik, 62:T95-T98

E. Stein, P. Wriggers (1982): Calculation of Impact-Contact Problems of Thin Elastic Shells taking into account Geometrical Nonlinearities within the Contact Region.,  Computer Methods in Applied Mechanics and Engineering, 34:861-880

K.-D. Klee, P. Wriggers (1980): Zur Berechnung des Stosses eines zylindrischen Stabes auf eine starre Wand.,  Zeitschrift für angewandte Mathematik und Mechanik, 60:T130-T132

P. Wriggers (1979): Zur Berechnung des Querstosses auf ein ebenes Stabtragwerk.,  Zeitschrift für angewandte Mathematik und Mechanik, 59:T164-T169

R. Rohrbach, E. Stein, P. Wriggers (1978): Vergleichende Betrachtungen des Runge-Kutta-Nystroem- und des Newmark-Verfahrens zur Integration von Systemen nichtlinearer Bewegungsgleichungen.,  Zeitschrift für angewandte Mathematik und Mechanik, 58:T168-T170

E. Stein, R. Rohrbach, P. Wriggers (1977): Zur numerischen Integration von Systemen nichtlinearer Bewegungsgleichungen.,  Pflüger-Festschrift, Hannover

P. Wriggers, O. Allix, C. Weißenfels (2020): Virtual Design and Validation,  Springer Nature
DOI: https://doi.org/10.1007/978-3-030-38156-1

M. Marino (2019): Constitutive Modeling of Soft Tissues,  In R. Narayan (Ed.), Encyclopedia of Biomedical Engineering 2:81-110, Elsevier
DOI: 10.1016/B978-0-12-801238-3.99926-4

A. Popp and P. Wriggers (2018): Contact Modeling for Solids and Particles,  Springer

J. Soric, P. Wriggers and O. Allix (2018): Multiscale Modeling of Heterogeneos Structures,  Springer

P. Wriggers and T. Lenarz (2018): Biomedical Technology – Modeling, Experiments and Simulation,  Springer

H. Wessels, M. Gieseke, C. Weißenfels, S. Kaierle, P. Wriggers, L. Overmeyer (2017): Simulation von Selective Laser Melting Prozessen,  In: R. Lachmayer, R. B. Lippert (Ed.) Additive Manufacturing Quantifiziert 145-162, Springer Vieweg, Berlin
DOI: 10.1007/978-3-662-54113-5
ISBN: 978-3-662-54112-8

M. Marino, G. Pontrelli, G. Vairo, P. Wriggers (2017): Coupling microscale transport and tissue mechanics: modelling strategies for arterial multiphysics,  In: S. Becker (Ed.), Microscale Transport Modelling In Biological Processes
DOI: 10.1016/B978-0-12-804595-4.00004-3

M. Frémond, M. Marino (2017): Shape Memory Alloys and Collisions,  In: M. Frémond (Ed.) Collisions Engineering: Theory and Applications, Springer Series Annals of Solid and Structural Mechanics 6:225-255, Springer-Verlag, Berlin.
DOI: 10.1007/978-3-662-52696-5_10
ISBN: 978-3-642-24637-1

J- Korelc, P.Wriggers (2016): Automation of Finite Element Methods,  Springer
ISBN: 978-3-319-39003-1

J.-P. Fürstenau, B. Avci and P. Wriggers (2016): A Numerical Review of Multi-Fluid SPH Algorithms for High Density Ratios,  Advances in Computational Fluid-Structure Interaction and Flow Simulation, Springer Verlag, Berlin. pp. 139-150.
ISBN: 978-3-319-40827-9

M. Weidling, S. Besdo, T. Schilling, M. Bauer, T. Hassel, F.-W. Bach, H. J. Maier, J. Lamon, A. Haverich, P. Wriggers (2015): Development of Magnesium Alloy Scaffolds to Support Biological Myocardial Grafts - A Finite Element Investigation,  in "Biomedical Technology" eds. T. Lenarz and P. Wriggers Lecture Notes in Applied and Computational Mechanics, Vol. 74, Springer Verlag, pp. 81-100

P. Dziewiecki, C. Weißenfels, P. Wriggers (2015): Modelling of Soil Structure Interaction by Applying a Hypoplastic Material Behaviour Within Mortar Contact Formulation,  In: Th. Triantafyllidis (Ed.), Holistic Simulation of Geotechnical Installation Processes, Numerical and Physical Modelling; Series: Lecture Notes in Applied and Computational Mechanics, Vol. 77, Springer International Publishing
DOI: 10.1007/978-3-319-18170-1
ISBN: 978-3-319-18169-1

M. Marino, G. Vairo (2014): Computational modelling of soft tissues and ligaments,  In: Z. Jin (Ed.), Computational modelling of biomechanics and biotribology in the musculoskeletal system, Woodhead Publishing Series in Biomaterials, vol. 81, Woodhead Publishing Limited, Cambridge
DOI: 10.1533/9780857096739.2.141
ISBN: 978-0-85709-673-9

P. Wriggers, M. Kultsova, A. Kapysh, A. Kultsov, I. Zhukova (2014): Intelligent Decision Support System for River Floodplain Management,  in Knowledge Based Software Engineering, Eds. A. Kravets, M. Shcherbakov, M. Kultsova and T. Iijima,, Communications in Computer and Information Science, Springer pp. 195-213, DOI: 10.1007/978-3-319-11854-3_18

M. Marino, G. Vairo (2013): Multiscale Elastic Models of Collagen Bio-structures: From Cross-Linked Molecules to Soft Tissues,  In: A. Gefen (Ed.), Multiscale Computer Modeling in Biomechanics and Biomedical Engineering. Studies in Mechanobiology, Tissue Engineering and Biomaterials 14:73-102, Springer-Verlag, Berlin Heidelberg
DOI: 10.1007/8415_2012_154
ISBN: 978-3-642-36482-2

M. Marino, G. Vairo (2012): Equivalent Stiffness and Compliance of Curvilinear Elastic Fibers,  In: F. Maceri, M. Fremond (Ed.), Mechanics, Models and Methods in Civil Engineering. Lecture Notes in Applied and Computational Mechanics 61:309-332, Springer-Verlag, Berlin Heidelberg
DOI: 10.1007/978-3-642-24638-8 21
ISBN: 978-3-642-24637-1

D. Besdo, B. Heimann, M. Klüppel, M. Kröger, U. Nackenhorst and P. Wriggers (2011): Elastomere Friction,  LNACM Vol. 51, Springer, Berlin

P. Pimenta and P. Wriggers (eds.) (2011): New Trends in Thin Structures: Formulation, Optimization and Coupled Problems,  CISM Course and Lecture Notes, vol 519, Springer, Wien

G. Zavarise and P. Wriggers (eds.) (2011): Trends in Computational Contact Mechanics,  LNACM Vol. 58, Springer, Berlin

E. Stephan and P. Wriggers (2011): Modeling, Simulation and Software Concepts for Scientific-Technological Problems,  LNACM Vol. 57, Springer, Berlin

E. Lehmann, S. Schmaltz, D. Faßmann, S. Germain, C. Weber, S. Löhnert, M. Schaper, Fr.-W. Bach, P. Steinmann, K. Willner, P. Wriggers (2011): Identifikation eines Materialmodells für den DC04 basierend auf der numerischen Modellierung der polykristallinen Mikrostruktur und experimentellen Daten,  In: M. Merklein, Fr.-W. Bach, A. E. Tekkaya (Hrg.) 1. Workshop Blechmassivumformung, S. 13-32, Meisenbach Bamberg. ISBN 978-3-87525-321-4.

C. Wellmann and P. Wriggers (2011): Homogenization of Granular Material modeled by a 3D DEM,  Particle-Based Methods: Fundamentals and Applications, eds. E. Onate and D. R. J. Owen, pp. 211-231

P. Wriggers (2010): Contact between Beams and Shells in "New Trends in Thin Structures: Formulation, Optimization and Coupled Problems", eds.: P. Pimenta and P. Wriggers,  CISM Course and Lecture Notes, vol 519, pp. 155-174, Springer, Wien

P. Wriggers, C. Carstensen (Eds.) (2009): Mixed Finite Element Technologies. CISM Courses and Lectures, vol. 509.,  Springer, Wien.

P. Wriggers, T. A. Laursen (Eds.) (2008): Computational Contact Mechanics. CISM Courses and Lectures, vol. 498.,  Springer, Wien.

P. Wriggers (2008): Nonlinear Finite Element Methods.,  Springer, Berlin.

P. Wriggers, U. Nackenhorst (Eds.) (2007): IUTAM Symposium on Computational Methods in Contact Mechanics. Proceedings of the IUTAM Symposium, Hannover, Nov. 5-8 2006.,  Springer, Dordrecht.

G. Zavarise, P. Wriggers, U. Nackenhorst (2006): A Guide for Engineers to Computational Contact Mechanics. The TCN Series on Simulation Based Engineering and Sciences, Vol. 1.,  Consorzio TCN, Trento, Italy.

P. Wriggers, U. Nackenhorst (Eds.) (2006): Analysis and Simulation of Contact Problems. Lecture Notes in Applied and Computational Mechanics, vol. 27.,  Springer, Heidelberg.

P. Wriggers (2006): Computational Contact Mechanics. Second Edition.,  Springer, Berlin, Heidelberg.

T. I. Zohdi, P. Wriggers (2005): Introduction to Computational Micromechanics. Lecture Notes in Applied and Computational Mechanics, vol. 20.,  Springer, Berlin.

P. Wriggers, U. Nackenhorst, S. Beuermann, H. Spiess, S. Loehnert (2005): Technische Mechanik kompakt: Starrkörperstatik, Elastostatik, Kinetik.,  Teubner.

E. Ramm, E. Rank, R. Rannacher, K. Schweizerhof, E. Stein, W. Wendland, G. Wittum, P. Wriggers, W. Wunderlich (2003): Error-controlled Adaptive Finite Elements in Solid Mechanics.,  Wiley, Chichester.

P. Wriggers (2002): Computational Contact Mechanics.,  Wiley, Chichester.

P. Wriggers (2001): Nichtlineare Finite-Element-Methoden.,  Springer, Berlin.

P. Wriggers, P. Panagiotopoulos (Eds.) (1999): New Developments in Contact Problems. CISM Courses and Lectures NO. 384.,  Springer, Wien, New York.

D. Gross, W. Schnell, W. Ehlers, P. Wriggers (1999): Formeln und Aufgaben zur Technischen Mechanik 3, Kinetik, Hydrodynamik.,  Springer, Berlin.

D. Gross, W. Hauger, W. Schnell, P. Wriggers (1999): Technische Mechanik 4: Hydromechanik, Elemente der Höheren Mechanik, Numerische Methoden.,  Springer, Berlin.

D. Gross, W. Schnell, W. Ehlers, P. Wriggers (1998): Formeln und Aufgaben zur Technischen Mechanik 2, Elastostatik, Hydrostatik.,  Springer, Berlin.

D. Gross, W. Schnell, W. Ehlers, P. Wriggers (1998): Formeln und Aufgaben zur Technischen Mechanik 1, Statik.,  Springer, Berlin.

P. Wriggers, U. Meisner, E. Stein, W. Wunderlich (1998): Finite Elemente in der Baupraxis, FEM 98.,  Ernst & Sohn.

J. Eibl, O. Obrecht, P. Wriggers (1992): Finite Elemente in der Baupraxis.

P. Wriggers, W. Wagner (Eds.) (1991): Nonlinear Computational Mechanics: State of the Art.,  Springer.

S. Besdo (2017): Numerische Methoden in der Biomechanik,  Habilitation B17/2, Institut für Kontinuumsmechanik
ISBN: 978-3-941302-21-1

H. K. A. Attar (2019): Modeling 3D Crack Coalescene and Percolation with the XFEM and Level Sets,  Dissertation B 19/5, Institut für Kontinuumsmechanik

S. Beese (2019): Expicit Modelling of Thermp-Plastic Fracture for Metals under Finite Deformations,  Dissertation B 19/2, Institut für Kontinuumsmechanik

H. Wessels (2019): Thermo-Mechanical Modeling for Selective Laser Melting,  Dissertation B 19/3, Institut für Kontinuumsmechanik | Datei |
DOI: 10.15488/5331
ISBN: 978-3-941302-31-0

W. Rust (2019): On the Solution of Contact Problems with Adaptive Polygonal Meshing Using the Virtual Element Method,  Dissertation B 19/4, Institut für Kontinuumsmechanik

P. Hartmann (2019): Simulation of Thermo-Chemo-Mechanical Coupled Additive Manufacturing Processes using Peridynamics,  Dissertation B 19/6, Institut für Kontinuumsmechanik

V. H. Nguyen (2018): Advanced abrasion model for tire wear,  Dissertation B18/4, Institut für Kontinuumsmechanik

M. Großöhmichen (2018): Methods to Predict the Clinical Output Levels of Acoustic Implants,  Dissertation, B18, Institut für Kontinuumsmechanik

M. Hojjati (2018): Discrete Multi-physics: A Meshfree Method including SPH-DEM Coupling for Simulation of the Red Blood Cells,  Dissertation B18/2, Institut für Kontinuumsmechanik

A. Harish (2018): Micromechanics, Fracture and Contact Behavior of Nanoparticle Reinforced Polymers,  Dissertation B18/1, Institut für Kontinuumsmechanik

M. Shahbaz (2018): Micro- and meso-scale modelling of dental composite materials,  Dissertation B18/3, Institut für Kontinuumsmechanik

S. Zeller (2017): Material Models for the thermoplastic material behaviour of a dual-phase Steel DP600 on a Microscopic and a Macroscopic Length Scale,  Dissertation B17/3, Institut für Kontinuumsmechanik

P. Wagner (2017): A Multiscale FEM Approach for Rubber Friction on Rough Surfaces,  Dissertation B17/5, Institut für Kontinuumsmechanik | Datei |

M. Soleimani (2017): Numerical simulation and experimental validation of biofilm formation,  Dissertation B17/1, Institut für Kontinuumsmechanik | Datei |

M. Struhz (2017): Konzept für ein wissensbasiertes Anlagenmanagement in einem Warmwalzwerk,  Dissertation B17/4, Institut für Kontinuumsmechanik | Datei |

M. Hothan (2016): Simulation nicht-konvexer Partikel mit der Methode der diskreten Elemente (DEM),  Dissertation B16/1, Institut für Kontinuumsmechanik

S. Yazdani (2016): Numerical simulations of delamination in fibre reinforced plastic shell structures using XFEM,  Dissertation B16/2, Institut für Kontinuumsmechanik

H. Clasen (2015): Computational multiscale modeling of localized ductile failure,  Dissertation B15/4, Institut für Kontinuumsmechanik | Datei |

M. A. A. Anndif (2015): Model Reduction in Nonlinear Finite Element Method for Engineering Structures,  Dissertation B15/2, Institut für Kontinuumsmechanik | Datei |

D. Gottschalk (2015): Mikromechanik der Nanoindentierung,  Dissertation B15/3 , Institut für Kontinuumsmechanik

S. Sahraee (2015): Homogenization in finite thermo-viscoplasticity,  Dissertation B15/1, Institut für Kontinuumsmechanik | Datei |

M. Holl (2014): Multiscale crack propagation and crack coalescence using the XFEM,  Dissertation B14/1, Institut für Kontinuumsmechanik | Datei |

C. Prange (2014): Combined Model and Mesh Adaptivity within 3D Multiscale XFEM for Cracks,  Dissertation B14/2, Institut für Kontinuumsmechanik | Datei |

T. Wu (2014): A multiscale/multiphysics model for concrete,  Dissertation B14/5, Institut für Kontinuumsmechanik | Datei |

J.-H. Dobberstein (2014): Interaction between rubber material and mold during demolding,  Dissertation B14/4, Institut für Kontinuumsmechanik | Datei |

N. Hajibeik (2014): Isogeometric Analysis of Fiber-Reinforced Materials-Scale Adaptivity and Delamination,  Dissertation B14/3, Institut für Kontinuumsmechanik

M. Marino (2013): Pseudo-potentials and thermomechanical response of materials and structures: a convex analysis approach,  Department of Civil Engineering and Computer Science, Università degli Studi di Roma Tor Vergata. PhD Committee: F. Auricchio, Q.S. Nguyen, S. Reese, E. Spacone, and P. Wriggers.

C. Weißenfels (2013): Contact methods integrating plasticity models with application to soil mechanics,  Dissertation B13/1, Institut für Kontinuumsmechanik | Datei |

B. Avci (2013): Modellierung und numerische Simulation von partikelbeladenen 3D Strömungen mit einem gekoppelten FEM-DEM-Ansatz,  Dissertation B13/3, Institut für Kontinuumsmechanik | Datei |

E. Lehmann (2013): Computational homogenisation of polycrystalline elastoplastic microstructures at finite deformation,  Dissertation B13/2, Institut für Kontinuumsmechanik

M. Budt (2012): Computational Homogenization Framework for Soft Elasto-Hydrodynamik Lubrication,  Dissertation B12/1, Institut für Kontinuumsmechanik | Datei |
ISBN: 978-3-941302-04-4

D. Müller-Hoeppe (2012): A multiscale method for fracturing solids,  Dissertation B12/2, Institut für Kontinuumsmechanik | Datei |
ISBN: 978-3-941302-05-1

C. Wellmann (2011): A Two-Scale Method of Granular Materials Using a Coulped DE-FE Approach,  Dissertation B11/1, Institut für Kontinuumsmechanik | Datei |
ISBN: 978-3-941302-02-0

R. Nitsche (2011): A Multiscale Projection Method for Contact on Rough Surfaces,  Dissertation B11/2, Institut für Kontinuumsmechanik | Datei |
ISBN: 978-3-941302-03-7

T. Gerasimov (2009): The clamped elastic grid, a fourth order equation on a domain with corners | Datei |

J. Reinelt (2008): Frictional Contact of Elastomer Materials on Rough Rigid Surfaces,  Dissertation B08/2, Institut für Kontinuumsmechanik | Datei |

E.F.I. Boerner (2008): A finite element formulation based on the theory of a Cosserat point,  Dissertation B08/1, Institut für Kontinuumsmechanik

C.B. Hirschberger, (2008): A Treatise on Micromorphic Continua. Theory, Computation, homogenization,  Dissertation, 2008, Technische Universität Kaiserslautern, ISBN 978–3–939432–80–7.

R. A. Sauer (2006): An atomic interaction based continuum model for computational multiscale contact mechanics,,  University of California, Berkeley

S. Loehnert (2005): Computational Homogenization of Microheterogeneous Materials at Finite Strains Including Damage,  Institut für Baumechanik und Numerische Mechanik, Leibniz Universität Hannover

M. Gierig, M. Marino, P. Wriggers (2019): A Computational Model for Biological Tissues Considering the Influence of Injury on Growth and Remodelling,  Proceedings in Applied Mathematics and Mechanics
DOI: https://doi.org/10.1002/pamm.201900259

M. Baldrich, F. Aldakheel, S. Beese, S. Löhnert, P. Wriggers (2019): A Micro-Thermo-Mechanical Model for a Tailored Formed Joining Zone Deformed by Die Forging,  ESAFORM 2019 AIP Conference Proceedings (accepted)

C. Tomann, L. Lohaus, F. Aldakheel, P. Wriggers (2019): Influence of water-induced damage mechanisms on the fatigue deterioration of high-strength concrete,  Proceedings of 6th International fib Congress: Concrete - innovations in materials, design and structures (2019). | Datei |

A. Hajikhani, M. Marino, and P. Wriggers (2019): Computational modeling of hydrogel cross‐linking based on reaction‐diffusion theory,  PAMM - Wiley Online Library

A. Ricker, N.H. Krӧger, M. Ludwig, R. Landgraf, J. Ihlemann (2019): Validation of a hyperelastic modelling approach for cellular rubber,  11th European Conference on Constitutive Models for Rubber
ISBN: 9780367342586

A. Ricker, N.H. Kröger (2019): Influence of various curing systems and carbon black content on the bulk modulus of EPDM rubber,  11th European Conference on Constitutive Models for Rubber
ISBN: 9780367342586

J. Plagge, A. Ricker, M. Klüppel (2019): Efficient modeling of inelastic effects in filled rubber using load dependent relaxation times,  11th European Conference on Constitutive Models for Rubber
ISBN: 9780367342586

F. Töller, S. Löhnert, P. Wriggers (2018): Internal Thickness Extrapolation,  Proceedings in Applied Mathematics and Mechanics
DOI: 10.1002/pamm.201800391

J.-P. Fürstenau, C. Weißenfels and P. Wriggers (2018): Examining errors and correction techniques for SPH,  PAMM
DOI: 10.1002/pamm.201800081

A.-K. Krüger, S. Julmi, C. Klose, S. Besdo, H. J. Maier, P. Wriggers (2018): Simulation of bone ingrowth into bone substitutes on implant level length scale,  Proceedings in Applied Mathematics and Mechanics
DOI: 10.1002/pamm.201800297

M. Baldrich, S. Löhnert, P. Wriggers (2018): Developing a model for the microscopic material behaviour of a tailored formed joining zone of an aluminium-steel hybrid solid component,  Proceedings in Applied Mathematics and Mechanics 18
DOI: 10.1002/pamm.201800329

A.-K. Krüger, S. Julmi, C. Klose, S. Besdo, P. Wriggers (2017): Simulation of the Change in Mechanical Properties of Degradable Bone Implants,  Proceedings of the 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry
DOI: 10.18419/opus-9334

J.-P. Fürstenau, B. Avci and P. Wriggers (2017): A comparative numerical study of pressure-Poisson-equation discretization strategies for SPH,  12th International SPHERIC Workshop, Ourense, Spain

M. Baldrich, S. Zeller, S. Löhnert, P. Wriggers (2017): Modelling the thermoplastic material behaviour of a tailored formed joining zone on a microscopic length scale with focus on the steel component,  Proceedings in Applied Mathematics and Mechanics 17
DOI: 10.1002/pamm.201710165

A.B. Kunin, S. Löhnert, P. Wriggers (2017): Thermo‐mechanical modeling of turbine blades taking into account structural defects,  Special Issue: 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Weimar 2017
DOI: 10.1002/pamm.201710229

S. Julmi, C. Klose, A.-K. Krüger, P. Wriggers, H. J. Maier (2017): Development of Sponge Structure and Casting Conditions for Absorbable Magnesium Bone Implants,  TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings
DOI: 10.1007/978-3-319-51493-2_29

Daniel Kienle, Fadi Aldakheel, Stephan Teichtmeister, Christian Miehe (2017): A phase field model for porous plastic solids at ductile fracture,  Proceedings of the 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry

Samira Hosseini, Stefan Löhnert (2017): Micromechanical Study of Fiber Kinking and Debonding in Fiber Reinforced Composites,  Proceeding of the 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry

T. Steiner, P. Wriggers (2017): A primal discontinuous Petrov Galerkin Finite Element Method,  Proceedings of the 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry (p. 670-673)
DOI: 10.18419/opus-9334

T. Steiner, P. Wriggers (2017): A primal discontinuous Petrov-Galerkin Finite Element Method for linear elasticity,  Proc. Appl. Math. Mech., 17(2017), pp. 83 - 86
DOI: 10.1002/pamm.201710025

Stephan Teichtmeister, Daniel Kienle, Fadi Aldakheel, Marc-André Keip (2017): A Phase Field Approach to Fracture in Anisotropic Brittle Solids,  Proceedings of the 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry

M. Dittmann, C. Hesch, J. Schulte, F. Aldakheel, M. Franke (2017): Multi-field modeling and simulation of large deformation ductile fracture,  Proceedings of the XIV International Conference on Computational Plasticity. Fundamentals and Applications
ISBN: 978 - 84 - 946909 - 6 - 9

W.J.H. Rust, S. Yazdani, and P. Wriggers (2016): XFEM Analysis – including buckling – of composite shells containing delamination

J.-P. Fürstenau, B. Avci and P. Wriggers (2016): A semi‐implicit multi‐fluid SPH algorithm suitable for GPU,  Proc. Appl. Math. Mech., 16(2016)1, pp. 593-594.
DOI: 10.1002/pamm.201610285

T. Steiner, P. Wriggers, S. Loehnert (2016): A discontinuous Galerkin Finite Element Method for linear elasticity using a mixed integration scheme to circumvent shear-locking,  Proc. Appl. Math. Mech., 16(2016)1, pp. 769 - 770
DOI: 10.1002/pamm.201610373

S. Yazdani, W.J.H. Rust, P. Wriggers (2016): A discontinuous shell element for the delamination analysis of composite laminates
DOI: 10.2514/6.2016-1971

L. Schwerdt, T. Hauptmann, A. Kunin, J.R. Seume, J. Wallaschek, P. Wriggers, L. Panning-von Scheidt, S. Löhnert (2016): Aerodynamical and Structural Analysis of Operationally Used Turbine Blades,  Procedia CIRP, The 5th International Conference on Through-life Engineering Services (TESConf 2016)
DOI: 10.1016/j.procir.2016.09.023

S. Zeller, S. Beese, G. Gerstein, K. Isik, S. Loehnert, F. Nuernberger, P. Wriggers, H. Maier, A. Tekkaya (2015): Möglichkeiten der simulativen Vorhersage von Temperaturentwicklung und Bauteilversagen infolge plastischer Deformation bei DP600 Bauteilen,  Tekkaya, A. E.; Liewald, M.; Merklein, M.; Behrens, B.-A. (Edt.): Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, (2015), Aachen: Shaker Verlag, pp. 113-128

W.T. Rust, P. Wriggers, B.D. Reddy (2015): Application of the virtual element method to non-conforming contact interfaces,  Proceedings of the 8th International Congress of Croatian Society of Mechanics (8th ICCSM), I. Kožar, N. Bićanić, G. Jelenić, M. Čanađija, Opatija, Croatia, 29 September - 3 October 2015

S. Zeller, S. Loehnert, P. Wriggers (2015): Modelling thermoplastic material behaviour of dual-phase steels on a microscopic length scale,  Proc. Appl. Math. Mech., 15(2015)1, pp. 373 - 374

S. Yazdani, W.J.H. Rust, P. Wriggers (2015): Mixed-mode delamination analysis of composite laminates with XFEM based on a cohesive zone model,  5th ECCOMAS Thematic Conference on Mechanical Response of Composites, Bristol, UK

D. Bianchi, M. Marino, G. Vairo (2015): Mechanical Behaviour of aortic segment via a patient-specific aortic computational framework,  Proceedings of the 44th National Congress of the Italian Association for the Analysis of Stresses (AIAS 2015), September 2015 - Messina, Italy.

W.J.H. Rust, S. Yazdani, P. Wriggers (2015): Extended FEM (XFEM) entwickelt für die Analyse von Delaminationen in ANSYS,  ANSYS Conference & 33. CADFEM Users’ Meeting 2015, Messe Bremen, Germany

F. Nerilli, L. Tarquini, M. Marino, G. Vairo (2015): Numerical Modeling of Failure Modes in Bolted Composite Laminates,  AIP Conf. Proc. 1648
DOI: 10.1063/1.4912805

M. Marino, P. Wriggers (2015): Multiscale homogenization for the computational mechanics of cardiovascular structures: physiopathological behavior,  Report of the Workshop Computational Engineering, Oberwolfach Reports 43:31-33
DOI: 10.4171/OWR/2015/43

S. Di Caprera, M. Marino, G. Vairo (2014): Bending of shape-memory alloys’ beams: constitutive modeling and structural response,  VII Annual Meeting of the AIMETA Materials Group, June 2014 - Cassino, Italy

M. Marino, F. Nerilli, G. Vairo (2014): A finite-element approach for the analysis of pin-bearing failure of composite laminates,  XX Italian National Congress of Compuational Mechanics

M. Marino (2014): Pseudo-potentials and thermomechanical response of materials and structures: a convex analysis approach,  PhD thesis presentation, XX Italian National Congress of Computational Mechanics, June 2014 - Cassino, Italy

G.A. Drosopoulos, L. Plymakis, G.E. Stavroulakis, P. Wriggers (2014): Numerical Homogenization in Two-dimensional Elasticity Including Unilateral Cracks,  Proceedings in Contact Mechanics International Symposium (CMIS), Abu Dhabi, UAE

S. Yazdani, P. Ribeiro (2014): Modes of vibration of unsymmetric multilayered composite plates with curvilinear fibres,  9th International Conference on Structural Dynamics (EURODYN), Porto, PORTUGAL

S. Brach, M. Marino, G. Vairo (2013): Thermomechanical response of shape-memory alloys’ beams,  XXI National Congress of Italian Association of Theoretical and Applied Mechanics (AIMETA 2013), September 2013 - Torino, Italy

M. Fremond, M. Marino (2013): Impact behavior of Shape-Memory Alloy structures,  Problemi attuali e prospettive nell’ingegneria delle strutture

F. Maceri, M. Marino, A. Rizzo, G. Vairo (2013): Mechanical performance of bolted joints in composite laminates,  42◦ National Congress of Italian Association for the Analysis of Stresses (AIAS 2013), September 2013 - Salerno, Italy

M. Weidling, S. Besdo, T. Schilling, M. Bauer, T. Hassel, A. Haverich, P. Wriggers (2013): Finite element simulation of myocardial stabilising structures and development of new designs,  In: Biomedical Engineering / Biomedizinische Technik 58 (Suppl. 1), DOI 10.1515/bmt-2013-4061

K. Tsapara, G.A. Drosopoulos, G.E. Stavroulakis (2013): Finite Element Analysis of Fire Resistant Reinforcement on End-Plate Steel Connections, COST, Proceedings of the International Conference, Application of Structural Fire Engineering, Prague, Czech Republic

G.A. Drosopoulos, M.E. Stavroulaki, G.E. Stavroulakis (2013): Homogenization and Elastic Analysis of Masonry Walls, Proceedings of the 10th HSTAM International Congress on Mechanics, Chania, Crete, Greece

G.E. Stavroulakis, K. Giannis, G.A. Drosopoulos, M.E. Stavroulaki (2013): Non-linear Computational Homogenization Experiments,  Proceedings of the COMSOL Conference in Rotterdam, The Netherlands

G.E. Stavroulakis, N.T. Kaminakis, G.A. Drosopoulos (2013): Auxetic Microstructures: Topology Optimization and Numerical Homogenization, Proceedings in the 8th German-Greek-Polish Symposium, Goslar, Germany

G.A. Drosopoulos, P. Wriggers, G.E. Stavroulakis (2013): Incorporation of Contact Mechanics in Multi-level Computational Homogenization for the Study of Composite Materials, Proceedings of 3rd International Conference on Computational Contact Mechanics (ICCCM), Lecce, Italy

G.A. Drosopoulos, P. Wriggers, G.E. Stavroulakis (2013): Contact Analysis in Multi-Scale Computational Homogenization, Proceedings of 3rd International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC), Prague, Czech Republic

H. Clasen, C. B. Hirschberger, J. Korelc, P. Wriggers (2013): FE²-homogenization of micromorphic elasto-plastic materials,  Proceedings of the 12th International Conference on Computational Plasticity (COMPLAS XII), September 3-5, 2013, Barcelona, Spain

T. Wu, I. Temizer and P. Wriggers (2013): A Multiscale Method to analyze the deterioration due to Alkali Silica Reaction considering the effects of temperature and relative humidity,  accepted by V Coupled Problem Conference

D. Faßmann, K. Isik, S. Zeller, S. Beese, N. Ben Khalifa, F. Nuernberger, M. Schaper, A. Tekkaya, S. Loehnert, P. Wriggers (2013): Abbildung des Werkstoffverhaltens von ferritischem Stahl in numerischen Modellen zur Darstellung von Blechmassivumformprozessen bei zyklischen Belastungspfaden,  In: M. Merklein, B.-A. Behrens, A.E. Tekkaya (Edt.): Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013, (2013), pp. 69-84

M. Fremond, M. Marino (2012): Shape memory alloys and collisions,  The 23rd International Congress of Theoretical and Applied Mechanics (ICTAM 2012), China National Convention Center, August 2012 - Beijing, China

F. Maceri, M. Marino, G. Vairo (2012): Integrated mechanical models for collagenous biostructures at different length scales,  The 7th International Conference on Mathematical Modelling (MATHMOD 2012), Vienna University of Technology, February 2012 - Wien, Austria. vol. ARGESIM Rep. n. S38:217(1)-217(5)

M. Bauer, T. Hassel, Ch. Biskup, D. Hartung, T. Schilling, M. Weidling, P. Wriggers, F. Wacker, Fr.-W. Bach, A. Haverich (2012): Geometric adaption of resorbable myocardial stabilizing structures based on the magnesium alloys LA63 and ZEK100 for the support of myocardial grafts on the left ventricle,  In: Biomedical Engineering / Biomedizinische Technik 57 (Suppl. 1), DOI 10.1515/bmt-2012-4214

H. Clasen, C. B. Hirschberger (2012): On theory and computation of gradient-based multifield inelasticity,  CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), September 10-14, 2012, Vienna, Austria

T.Wu, I.Temizer and P.Wriggers (2012): Multiscale Modeling of Alkali Silica Reaction Induced Damage in Concrete: Coupled Hydro-Chemical and Thermo-Mechanical Effects,  10th WCCM Proc., 2012(accepted)

T.Wu, I.Temizer and P.Wriggers (2012): Computational Thermal Homogenization of Concrete,  PAMM

M. Paggi, E. Lehmann, C. Weber, A. Carpinteri, P. Wriggers (2012): 3D vs. 2D Modelling of Cracking and Plasticity in Polycrystalline Materials,  10th WCCM Proc.

E. Lehmann, S. Loehnert, P. Wriggers (2012): Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformation,  6th ECCOMAS Proc., e-Book Full Papers, 6213-6228

G.A. Drosopoulos, G.E. Stavroulakis, M.E. Stavroulaki (2011): Unilateral Modelling and Related Identification in Masonry Structures,  Proceedings of the 2nd International Conference on Computational Contact Mechanics (ICCCM), Hannover, Germany

A. Kalogeropoulos, G.A. Drosopoulos, G.E. Stavroulakis (2011): Thermomechanical Non-Linear Analysis: Finite Element Analysis of Bolted Steel Connections Using Contact Mechanics ,  COST, Proceedings of the International Conference, Application of Structural Fire Engineering, Prague, Czech Republic

A. Kalogeropoulos, G.A. Drosopoulos, G.E. Stavroulakis (2011): Thermal-Stress Analysis of a 3-Dimensional End-Plate Steel Joint,  Proceedings of the 7th GRACM International Congress on Computational Mechanics, Athens, Greece

M.E. Stavroulaki, G.A. Drosopoulos, G.E. Stavroulakis (2011): Unilateral Analysis and Damage Identification in Masonry Structures ,  Proceedings of the 13th CC2011 International Conference on Civil, Structural and Environmental Engineering Computing, Crete, Greece

D. Rittershaus, D. Gottschalk, J. Reifenrath, W. Aljuneidi, T. Flörkemeier, S. Besdo, A. Meyer-Lindenberg (2011): In-vivo monitoring of forces in the loaded rabbit tibia via telemetry as a tool for enhanced implant construction,  EFORT - European Federation of National Associations of Orthopaedics and Traumatology (11th Congress), J Bone Joint Surg Br 2011 93-B:(SUPP II) 99.

E. Lehmann, S. Loehnert, P. Wriggers (2011): Towards the Effective Behaviour of Polycrystalline Microstructures at Finite Strains,  COMPLAS XI. Proc., 1573-1583

E. Stein, T. Gerasimov, M. Rüter (2011): Explicit and implicit residual-type goal-oriented error estimators for XFEM in LEFM,  In Adaptive modeling and simulation 2011, ECCOMAS Thematic-Conference Paris 2011, Aubry D et al. (eds). CIMNE: Barcelona, 2011; 44-55.

N. Hajibeik, I, Temizer, S. Löhnert, P. Wriggers (2011): Adaptive Multisclae Failure Analysis based on Error Estimation,  Proceeding of the 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites

T.Wu, I.Temizer and P.Wriggers (2011): Computational Homogenization of Damage in the Hardened Cement Paste due to Alkali Silica Reaction, ,  PAMM · Proc. Appl. Math. Mech. 11, 561 – 562 (2011) / DOI 10.1002/pamm.201110270

T.Wu, I.Temizer and P.Wriggers (2011): A Method of Two-Scale Chemo-Thermal-Mechanical Coupling For Concrete,,  In Computational Pasticity XI: Fundamentals and Applications, Barcelona, Spain, 1626–1637, (2011), COMPLASXI Proceedings

C.B. Hirschberger and P. Steinmann. (2011): Modelling of Microstructured Materials with Micromorphic Continuum Approaches,  In D. Mueller-Hoeppe, S. Loehnert and S. Reese (Eds.): Recent Developments and Innovative Applications in Computational Mechanics. p. 191-198, Springer-Verlag.

C. B. Hirschberger and B. D. Reddy (2011): Computational modelling of multifield single-crystal gradient plasticity,  COMPLAS XI Proceedings, submitted for publication

C. B. Hirschberger and J. Korelc. (2011): A Robust Computational Homogenization Approach to the Modelling of Inelastic Heterogeneous Material Layers.,  Computational Fracture and Failure of Materials and Structures. Editors: J. Oliver, M. Jirasek, O. Allix, N. Moes, p. 293

C. B. Hirschberger (2010): Computational homogenization for heterogeneous cohesive layers incorporating size effects.,  PAMM, 10: 677–680. DOI: 10.1002/pamm.201010327

G.A. Drosopoulos, S. Samaras, G.E. Stavroulakis, K.M. Abdalla (2010): Non-Linear Analysis of End-Plate Steel Connections with 3d Finite Elements with Contact and Friction,  Proceedings of the 31st International Symposium on Mechanics of Materials, Crete, Greece

G.A. Drosopoulos, M.E. Stavroulaki, G.E. Stavroulakis (2010): Unilateral contact analysis for masonry bridges: Direct and inverse problems,  7th Meeting of Unilateral Problems in Structural Analysis, Palmanova, Italy

G.A. Drosopoulos, S. Samaras, G.E. Stavroulakis, K.M. Abdalla (2010): Non-Linear Behaviour of Bolted End-Plate Steel Connections: Experiment and Finite Element Analysis,  Proceedings of the 9th HSTAM International Congress on Mechanics, Limassol, Cyprus

C. Wellmann and P. Wriggers (2010): Homogenization of Granular Material modeled by a 3D DEM,  Particle-Based Methods. Fundamentals and Applications, pp. 211-231, Springer, in press

F. Maceri, M. Marino, G. Vairo (2010): From cross-linked collagen molecules to arterial tissue: A nano-micro-macroscale elastic model,  Proceedings of the 2nd International Conference on Multiscale Modeling and Simulation (ICMMS 2010), Acta Mechanica Solida Sinica 23(S1):98-108

C. B. Hirschberger (2010): Computational mechanics of inelastic cohesive interfaces with size effects.,  Multiscale Materials Modelling (MMM 2010) – Conference Proceedings, Editors: P. Gumbsch, E. van der Giessen, 200–201 Fraunhofer Verlag, (2010)

C. B. Hirschberger, R. H. J. Peerlings, W. A. M. Brekelmans, and M. G. D. Geers (2010): Dislocation interactions in strain gradient crystal plasticity,  Proceedings of the 4th European Congress on Computational Mechanics (ECCM 2010), Editors: O. Allix, P. Wriggers, Paris, France on cd-rom, (2010)

P. Wriggers and S. Löhnert (2010): Characterization of Concrete by a Multiscale Approach,  Proceedings of the International RILEM Conference on Material Science, Vol II, Ed. W. Brameshuber, pp 3-12, RILEM, S. A. R. L., Bagneux

T.Wu and P.Wriggers (2010): Chemo-Thermo-Mechanics Coupling Applied in Hardened Cement Paste. PAMM · Proc. Appl. Math. Mech. 10, 391 – 392 (2010) / DOI 10.1002/pamm.201010188

R. A. Sauer (2009): A 3D multiscale finite element model describing the adhesion of a gecko seta,,  Proc. Appl. Math. Mech., 9, in press

F. Maceri, M. Marino, G. Vairo (2009): Mathematical modelling of tendon mechanics,  The 6th International Conference on Mathematical Modelling, Vienna University of Technology, June 2009 - Wien, Austria.

R. A. Sauer (2009): A computational contact model for nanoscale rubber adhesion,,  Constitutive Models for Rubber IV, Eds: G. Heinrich et al., CRC Press, pp. 47-52

I. Temizer, P. Wriggers (2009): A contact homogenization framework for granular interfaces.,  Proceedings of the 80th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (February 9 - 13, 2009), Gdansk (Poland)

P. Wriggers and C. Wellmann (2009): Homogenization of Granular Material Modeled by a Three-Dimensional Discrete Element Method,  Particle-Based Methods, Fundamentals and Applications, pp. 84-87

C. B. Hirschberger, R. H. J. Peerlings, W. A. M. Brekelmans, and M. G. D. Geers (2009): On the role of dislocation conservation in higher-order crystal plasticity,  PAMM - Proc. Appl. Math. Mech., 9, 309–310, (2009)

C. Wellmann and P. Wriggers (2009): A 3D Coupled Finite-Discrete Element Method for Modeling the Interaction of Granular Materials and Solid Structures,  Particle-Based Methods, Fundamentals and Applications, pp. 72-75

C. B. Hirschberger, R. H. J. Peerlings, W. A. M. Brekelmans, and M. G. D. Geers (2009): On the dislocation interactions underlying higher-order crystal plasticity,  Proceedings of the 7th EUROMECH Solid Mechanics conference (ESMC), Editors: J.A.C. Ambrósio, M.P.T. Silva, Lissabon, Portugal, on cd-rom, (2009)

R. A. Sauer (2008): An atomic interaction-based rod formulation for modeling gecko adhesion,,  Proc. Appl. Math. Mech., 8, in press

R. A. Sauer (2008): A finite element seta model for studying gecko adhesion,,  Proc. IMECE 2008, 67193

C. Weißenfels and P. Wriggers (2008): A Finite Element Algorithm for Electromechanical Contact Problems,  Proceedings in Applied Mathematics and Mechanics, 8, pp. 10493-10494

G.A. Drosopoulos, G.E. Stavroulakis, C.V. Massalas (2008): Unilateral Contact Analysis for Masonry Bridges,  1st Abaqus Users Conference, Athens Golf Club, Glyfada, Greece

D. Mueller-Hoeppe, S. Loehnert and P. Wriggers (2008): A Computational Method for three Dimensional Finite Deformation Fracture,  Proceedings of the XXII ICTAM, 25-29 August 2008, Adelaide, Australia

I. Temizer, P. Wriggers (2008): On the computation of the macroscopic tangent for multiscale volumetric homogenization problems.,  Proceedings of the 79th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (March 31 - April 4, 2008), Bremen

P. Wriggers and M. Hain (2008): Material Characterization based on MicrostructuralComputations and Homogenization,  Proceedings of the IUTAM Symposium onTheoretical, Computational and Modelling Aspects of Inelastic Media, ed. D. Reddy

K. Krabbenhoft, M. Hain, P. Wriggers (2008): Computation of Effective Cement Paste Diffusivities from Microtomographic Images.

C. Wellmann and P. Wriggers (2008): A Coupled 3D Discrete-Finite Element Method for the Simulation of Granular Materials and Their Interaction with Solid Structures,  Proceedings in Applied Mathematics and Mechanics, 8(1), pp. 10353-10354

C. Wellmann, C. Lillie, and P. Wriggers (2008): A Coupled Discrete-Finite Element Method Modeling the Interaction of Granular Materials and Solid Structures,  CD-ROM Proceedings of the 8th World Congress on Computational Mechanics (WCCM 8) and the 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), CIMNE 2008

P. Wriggers, D. S. Mueller-Hoeppe, S. Loehnert (2008): Brick elements for finite deformations based on macro-concepts and on inhomogeneous mode enhancement,  Proceedings of the ECCOMAS Jubilee Conference, ed. H. Mang, Wien

P. Wriggers, J. Nettingsmeier and I. Temizer (2008): On Multiscale Methods in Contact Mechanics.,  Proceedings of 6th GRACM 2008, Eds. D. Talaslidis, Thessaloniki

C.B. Hirschberger, N. Sukumar and P. Steinmann (2008): Computational multiscale modelling of microstructured material layers,  In Proceedings of the WCCM8 and ECCOMAS 2008; Editors: B.A. Schrefler, U. Perego, Venice, Italy, on CD, (2008)

C. B. Hirschberger, S. Ricker, P. Steinmann, and N. Sukumar (2008): Deriving global material properties of a microscopically heterogeneous medium – computational homogenisation and opportunities in visualisation.,  In H. Hagen, M. Hering-Bertram, C. Garth, editors, ’Visualization of Large and Unstructured Data Sets’, Vol. 2, Köllen, 2008. ISBN: 978–3885794417.

P. Wriggers, J. Nettingsmeier (2008): Homogenization and Multi-Scale Approaches for Contact Problems.,  129-161

R. A. Sauer and S. Li (2007): An atomic interaction-based continuum model for computational multiscale contact mechanics,,  Proc. Appl. Math. Mech., 7, 4080029

C.A. Zeris, G.A. Drosopoulos, G. Pergantis (2007): Testing of Non-ductile RC Columns Repaired / Strengthened with FRP Under Oblique Excitation,  Proceedings of the 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, University of Patras, Patra, Greece

M. Betti, G.A. Drosopoulos, G.E. Stavroulakis (2007): On the Collapse Analysis of Single Span Masonry/Stone Arch Bridges with Fill Interaction,  Proceedings of the 5th International Conference on Arch Bridges, Madeira, Portugal

I. Temizer, Wriggers P. (2007): A database approach to homogenization.,  In J. Schroeder et al., editors, Proceedings of the First Seminar on the Mechanics ofMultifunctional Materials (May 7-10, 2007), Bad Honnef, pages 135-138

C. Wellmann and P. Wriggers (2007): Homogenization of granular materials modeled through a three-dimensional Discrete Element Model,  Proceedings of the First Seminar on The Mechanics of Multifunctional Materials, pp. 147-150

C.B. Hirschberger, S. Ricker, P. Steinmann, N. Sukumar (2007): A computational homogenisation approach to material interfaces,  In Computational Pasticity IX: Fundamentals and Applications; Editors: D.R.J. Owen, E. Oñate, Barcelona, Spain, 442–445, (2007)

C. B. Hirschberger, E. Kuhl, and P. Steinmann (2007): Recent aspects in the mechanics of micromorphic continua,  In H. Yuan, F. H. Wittmann, editors Nonlocal Modeling of Material’s Failure, pages 3–14. 2007. Aedificatio Publishers. ISBN-13: 978-393168187

P. Wriggers (2006): Virtual Experiments in Engineering Material Design Processes.,  3-7

C. Zeris, G.A. Drosopoulos (2006): Experimental Investigation of Columns Designed to Older Design Regulations, Under Oblique Excitation,  Proceedings of the 15th Concrete Conference, Alexandroupolis, Greece (in Greek)

G.A. Drosopoulos, G.E. Stavroulakis, C.V. Massalas (2006): FRP Reinforcement of Arch Bridges: Unilateral Models and Limit Analysis,  Proceedings of the 2nd International Conference on Nonsmooth/Nonconvex Mechanics with Applications in Engineering (NNMAE), Thessaloniki, Greece

G.A. Drosopoulos, G.E. Stavroulakis, C.V. Massalas (2006): Influence of the FRP Strengthening, the Shape and the Movement of Abutments on the Collapse of Arch Stone Bridges,  Proceedings of the 3rd European Conference on Computational Mechanics - Solids, Structures and Coupled Problems in Engineering, Lisbon, Portugal

M. Campo, G.A. Drosopoulos, G.R. Fern´andez, G.E. Stavroulakis (2006): Unilateral Contact and Damage Analysis in Masonry Arches,  Proceedings of the International Union of Theoretical and Applied Mechanics-Symposium on Computational Contact Mechanics, Hannover, Germany

B.-A. Lau, P. Wriggers, A. Schneider, R. Bader (2006): Finite-element transient calculation of a bell struck by a clapper,  The Journal of the Acoustical Society of America, 119:3290

I. Temizer, P. Wriggers (2006): A numerical method for homogenization in isotropic and anisotropic nonlinear elasticity.,  In P. Gumbsch, editor, Multiscale Materials Modeling (September 18-22, 2006), Freiburg, pages 237-240

E.F.I. Boerner, D.S. Mueller-Hoeppe, S. Loehnert and P. Wriggers (2006): A Finite Element Formulation Based on the Theory of a Cosserat Point -- Extension to Ogden Material,  Proceedings III European Conference on Computational Mechanics 2006

C.B. Hirschberger, E. Kuhl and P. Steinmann (2006): Computational modelling of micromorphic continua - theory numerics and visualisation challenges,  in Visualization of Large and Unstructed Data Sets; Editors: H.Hagen, A. Kerren, P. Dannenmann, Dagstuhl, Germany, Vol. S-4 of GI Edition, (2006)

Hirschberger C.B., E. Kuhl and P. Steinmann. (2006): Computational micromorphic continua - deformational and configurational mechanics,  6th European Solid Mechanics Conference, 2006, Budapest, Hungary, S23-K232.

C.B. Hirschberger, E. Kuhl, P. Steinmann (2006): A configurational-mechanics perspective on computational micromorphic continua,  In Proceedings of the Seventh World Congress on Computational Mechanics; Editors: J.P. Ponthot, D. Celentano, Los Angeles, United States, on CD rom, (2006)

S. Lutzenberger and C. Weißenfels (2005): Coupling of moving, actively controlled maglev vehicles and guide way systems: Algorithm and simulation ,  Proceedings of the 6th International Conference on Structural Dynamics EURODYN 2005, 1-3, pp. 2083-2088

G.E. Stavroulakis, G.A. Drosopoulos, M.E. Stavroulaki, C.V. Massalas, A.A. Liolios (2005): Solvability and Limit Analysis of Masonry Bridges,  Proceedings of the 4th Contact Mechanics International Symposium (CMIS), Hannover, Germany

G.A. Drosopoulos, G.E. Stavroulakis, C.V. Massalas (2005): Limit Load of a Masonry Arch Bridge Based on Finite Element Frictional Contact Analysis,  Proceedings of the 5th GRACM International Congress on Computational Mechanics, Limassol, Cyprus

P. Wriggers, M. Siplivaya, I. Joukova, R. Slivin (2005): Intelligent Support of Engineering Analysis,  AI-METH 2005 – Artificial Intelligence Methods

H. Spiess, P. Wriggers (2005): Reduction Methods in Finite Element Analysis of Nonlinear Structural Dynamics,  Proceedings of the Fifth {EUROMECH} Nonlinear DynamicsConference (ENOC), Eindhoven

H. Spiess, P. Wriggers (2005): Reduction Methods for FE Analysis in Nonlinear Structural Dynamics,  PAMM, 5, 135-136

S. Loehnert, P. Wriggers (2005): Aspects of computational homogenisation of microheterogeneous materials including decohesion at finite strains,  PAMM, 5, 427-428

M. Hain, P. Wriggers (2005): Simulating the Microstructure of cement-based Construction Materials,  PAMM, 5, 401-402

E. F. I. Boerner, P. Wriggers, M. B. Rubin (2005): A finite element formulation based on the theory of a Cosserat point,  PAMM, 5, 379-380

P. Wriggers, M. Hain, S. Löhnert (2005): Mikromechanische Modellierung von Beton,  Jürgen Grünberg zum 60. Geburtstag, Herausgeber: M. Hansen and J. Lierse, Berichte des Instituts für Massivbau, No. 3, Fraunfofer IRB Verlag, Stuttgart

P. Wriggers, S. Löhnert, M. Hain (2005): Micro characterization of materials with microheterogeneous structure,  Proceedings of COMPLAS 8, eds. D. R. J. Owen and E. Onate, CIMNE, Barcelona

M. Hain, P. Wriggers (2005): A Micro-macro Approach for Cement-based Construction Materials,  Proceedings of COMPLAS 8, eds. D. R. J. Owen and E. Onate, CIMNE,Barcelona

S.H. Reese, P. Wriggers (2005): On the Explicite Simulation of Concrete Cracking Using One Enriched Finite Element Method,  Proceedings of COMPLAS 8, eds. D. R. J. Owen and E.Onate, CIMNE, Barcelona

L. Krstulovic-Opara and P. Wriggers (2005): A Three-dimensional Contact Element Based onthe Moving Friction Cone Approach and the Elliptical Coulomb Law,  Proceedings of COMPLAS 8, eds. D. R. J. Owen and E. Onate, CIMNE, Barcelona

D. P. Boso, P. Litewka, B. A. Schrefler, P. Wriggers (2005): 3D Beam-to-beam Contact Within Coupled Electromechanical Fields: a Finite Element Model.

K. Krabbenhoft, A. Lyamin, S. Sloan, P. Wriggers (2005): Elastoplasticity by Mathematical Programming Methods.

H. Spiess, B. Lau, P. Wriggers, A. Schneider, R. Bader, M. Wiggenhagen (2004): Analysis of Bell Vibrations.

P. Wriggers, A. Rieger (2004): An adaptive method for large deformation thermo-mechanical problems with unilateral constraints.

K. A. Fischer, P. Wriggers (2004): Different weak FE-formulations for 2-D frictionless Large Deformation Contact based on the Mortar Method,  PAMM, 4, 312-313

M. Hjiaj, Z.Q. Feng, K. Krabbenhoft and P. Wriggers (2004): A time-stepping algorithm for nonsmooth friction models,  Proceedings of ECCOMAS, on CD

P. Wriggers, G. Zavarise (2004): Computational Contact Mechanics.

S. Loehnert, K. Tegeler, P. Wriggers, T. Raible (2003): A simple wrinkling algorithm for orthotropic membranes at finite deformations,  Proceedings Textile Composites and inflatable Structures, Structural Membranes

S. Loehnert, P. Wriggers (2003): Homogenization of microheterogeneous materials considering interfacial delamination at finite strains.,  Proceedings VII International Conference on Computational Plasticity, COMPLAS

A. Rieger, O. Scherf and P. Wriggers (2003): Adaptive methods for contact problems,  Errorcontrolled Adaptive Finite Elements in Solid Mechanics, ed. E. Stein, Wiley, Chichester, pp. 147 - 179

K. A. Fischer, P. Wriggers (2003): Development of a Contact Element for Finite Deformations using the Mortar Method,  PAMM, 3, 272-273

D. Freßmann, P. Wriggers (2003): A Micro- Thermomechanical coupled Finite-Element Model for the Simulation of Particulate Cellular Solids at Finite Strains,  PAMM, 3, 274-275

C. Hahn, P. Wriggers (2003): An Explicit Multi-Body Contact Algorithm,  PAMM, 3, 280-281

T. Raible, S. Loehnert, K. Tegeler and P. Wriggers (2003): Computation of wirnkling states in membranes,  Textile composites and inflatable structures, eds. E. Onate and B. Kröplin,CIMNE, Barcelona

P. Wriggers and A. Rieger (2003): Advances in Adaptive Methods for Thermo-Mechanical Contact Problems,  Computer Methods in Mechanics 2003 in Gliwice, Poland, ed. A. Borkowski

P. Wriggers, K. Fischer and A. Rieger (2003): Recent Developments in Contact Mechanics,  4thEuropean LS-DYNA Users Conference in Ulm, ed. K. Schweizerhof, Dynamore

K. Wiechmann, P. Wriggers (2002): Variational Design Sensitivity Analysis of Structures with Finite Thermo-Elastic-Plastic Deformations.

L. Krstulovic-Opara, P. Wriggers (2002): A two-dimensional C^1-continuous contact element based on the moving friction cone description.

D. Fressmann, P. Wriggers (2002): A Reduced Integration Scheme for the Analysis of Microheterogeneous Materials in Finite Elasticity.

C. Leppin, P. Wriggers (2002): An adaptive finite element method for discontinuous localization analysis.

P. Litewka, P. Wriggers (2002): 3D beam-to-beam contact finite element.

T. Raible, D. Freßmann, R.L. Taylor, P. Wriggers (2002): Customization of GiD & FEAP for Scientific Applications.

L. Krstulovic-Opara, P. Wriggers (2002): Convergence studies for 3D smooth frictional contact elements based on quartic Bezier surfaces.,  371-378

P. Wriggers, K. Chavan (2002): Consistent Coupling of Beam and Shell Elements for Thermo-Mechanical Analysis.

M. Andre, P. Wriggers, C. Bertram (2001): Simulation of effective rubber properties during cross-linking using a simple network model.

P. Wriggers, A. Bandeira, P. Pimenta (2001): Computation analysis of contact mechanics undergoing large 3d deformations.

J. Korelc, L. Krstulovic-Opara, P. Wriggers (2000): Tridimenzionalni kontaktni element z uporabo Bezierovih ploskev cetrtega reda.,  215-222

L. Krstulovic-Opara, P. Wriggers, J. Korelc (2000): Symbolically generated 3D smooth polynomial frictional contact element based on the quartic Bezier surfaces.

C. Boley, H. Brandl, R. Katzenbach, P. Wriggers, J. Giere (2000): Neues Stoffmodell für Hohlraumbauten im Salzgebirge.,  51:25-44

L. Krstulovic-Opara, P. Wriggers (2000): Large step approach for the simple 2D and 3D frictional contact elements.,  45-52

P. Wriggers, C. S. Han, A. Rieger (2000): H-Adaptive finite element methods for contact problems.,  117-141

P. Wriggers (2000): Finite Element Methods for Rolling Contact.,  411:85-162

M. Andre, P. Wriggers (1999): Computational Simulation of the Vulcanization Process in Rubber Profile Production.

H. Tschöpe, E. Onate, P. Wriggers (1999): The critical displacement method with a constitutive damage model.

P. Wriggers, C. S. Han, A. Rieger (1999): h-Adaptive FE-Methods for Contact Problems.

P. Wriggers, A. Rieger (1999): Adaptive Methods for Contact Problems, Recent Developments.

S. Reese, P. Wriggers (1999): An Automatic Control Technique to avoid Hourglass Instabilities in Unstructured Meshes.

P. Wriggers, A. Rieger (1999): Comparison of different error measures for adaptive finite element techniques applied to contact problems involving large elastic strains.,  211 - 222

O. Scherf, P. Wriggers (1999): An adaptive finite element method for large deformation frictional contact.,  38:91-112

A. Haraldsson, P. Wriggers (1999): A Frictional Law for Soil-Concrete Contact based on a Numerical Model for the Microstructure.,  2:333-344

J. Sansour, P. Wriggers, C. Sansour (1999): Geometric Exact Models, Symplectic and Energy/Momentum Methods, and Active Degrees of Freedom for the Dynamics of Shells and Rods.

S. Reese, P. Wriggers (1999): Modelling of Thermo-Mechanical Material Behaviour of Rubber-like Polymers - Micromechanical Motivation and Numerical Simulation.

J. Korelc, L. Krstulovic-Opara, P. Wriggers (1999): Development of 2D contact elements with C1-continuity.,  127-134

P. Wriggers, L. Krstulovic-Opara, J. Korelc (1999): Development of 2D Smooth Polynomial Frictional Contact Element based on a Symbolic Approach.

P. Wriggers (1999): Finite elements for thermo-mechanical contact and adaptive finite element analysis of contact problems.,  179-246

C. Sansour, P. Wriggers, J. Sansour (1998): An Integration Scheme for the Nonlinear Dynamics which is independent of the Involved Nonlinearities.

P. Wriggers, A. Haraldsson (1998): Kontaktmodelle für die Interaktion Baugrund Tragwerk.,  38:91-112

J. Korelc, P. Wriggers (1997): Symbolic Approach in Computational Mechanics.

P. Wriggers, O. Scherf (1997): Adaptive Methods for Contact Problems.

M. Feucht, D. Gross, P. Wriggers (1997): A New Element Formulation for Nonlocal Damage Models.

C. Leppin, P. Wriggers (1997): Numerical Simulations of the Behaviour of Cohesionless Soil.

R. Eberlein, P. Wriggers (1997): Finite Element Formulations of five and six Parameter Shell Theories accounting for Finite Plasticity.

G.A. Holzapfel, R. Eberlein, P. Wriggers, H.W. Weizsäcker (1996): A continuum based framework for the finite element analysis of proximal arteries.,  335-338

C. Sansour, P. Wriggers, J. Sansour (1996): Formulation and Energy-Momentum Methods for the Nonlinear Dynamics of Geometric Exact Structures with a Nonlinear Configuration Space: Application to Chaotic and Large Overall Motion.

P. Wriggers, O. Scherf (1995): An adaptive finite element technique for nonlinear contact problems.

P. Wriggers, O. Scherf (1995): An adaptive finite element method for elastoplastic contact problems.

P. Wriggers, S. Meynen (1995): Parallele Algorithmen und Hardware für Berechnungsverfahren des Ingenieurbaus.

G. Zavarise, P. Wriggers (1995): On Contact Geometrical Relationschips.

G. Zavarise, P. Wriggers (1995): Elastoplastic contact problems solved by the cross-constraint method.

P. Wriggers, O. Scherf, C. Carstensen (1994): Adaptive Techniques for the Contact of Elastic Bodies.,  78-86

C. Leppin, P. Wriggers (1994): Numerische Simulation schnell laufender Risse in viskoplastischen Materialien.,  93

G. Zavarise, B.A. Schrefler, P. Wriggers (1994): On Numerical Analysis of Thermomechanical Contact Problems.

P. Wriggers, G. Zavarise (1993): Recent Trends in Computational Methods for Contact Problems.

P. Wriggers (1993): Kritische Wertung nichtlinearer Stabtheorien bei Anwendung auf baupraktische Aufgabenstellungen.

U. Hueck, H.L. Schreyer, P. Wriggers (1992): The mothod of orthogonal projections for handling constraints with applications to incompressible four-node quadrilateral elements.

P. Wriggers, C. Miehe (1992): Recent Advances in the Simulation of Thermomechanical Contact Precesses.

P. Wriggers, C. Miehe (1992): On the Treatment of Contact Contraints within Coupled Thermomechanical Analysis.

P. Wriggers, C. Miehe (1992): On Thermomechanical Contact within Large Deformation Problems.

P. Wriggers, C. Miehe (1992): Contact Constraints within Coupled Thermomechanical Analysis - A Finite Element Model.

G. Zavarise, B.A. Schrefler, P. Wriggers (1992): Consistent Formulation for Thermomechanical Contact based on Microscopic Interface Laws.

P. Wriggers (1992): Entwicklungstendenzen bei nichtlinearen FE-Methoden.

W. Wagner, P. Wriggers (1991): The Computation of Bifurcation Points via Fold Curves.

G. Zavarise, P. Wriggers, E. Stein, B.A. Schrefler (1991): An Efficient Thermomechanically Coupled Contact Element based on Microscopic Physical Behaviour of Surfaces.

P. Wriggers, E. Stein (1991): Impact Problems in Structural Mechanics: Theoretical and Numerical Aspects.

P. Wriggers, E. Stein, C. Miehe (1990): The Impact of Computer Aided Teaching in Lecturing Computational Mechanics.

E. Stein, W. Wagner, P. Wriggers (1990): Numerical Procedures for the Computation of Singular Points and Postcritical Branches.

P. Wriggers, W. Wagner (1990): Large Deformation Contact Problems of Axisymmetrical Membranes and Shells, A Finite Element Solution.

P. Wriggers, N. Tarnow (1990): Interactive Control of Non-linear Finite Element Calculations by an Expert System.

E. Stein, P. Wriggers (1990): Finite-Elemente-Methoden und ihre Absicherung in der Mathematik.

E. Stein, P. Wriggers, T. vu Van (1989): Models of Friction, Finite-Element-Implementation and Application to Large Deformation Impact-Contact-Problems.

P. Wriggers, F. Gruttmann (1989): Large deformations of thin shells: Theory and Finite-Element- Discretization, Analytical and Computational Models of Shells.,  135-159

P. Wriggers, C. Miehe, M. Kleiber, J.C. Simo (1989): On the Thermomechanical Treatment of Necking Problems, a Finite Element Solution.

E. Stein, W. Wagner, P. Wriggers (1989): Grundlagen nichtlinearer Berechnungsverfahren in der Strukturmechanik.

P. Wriggers, W. Wagner (1988): Solution Methods for Stability Analysis.

P. Wriggers, W. Wagner (1988): A Solution Method for the Postcritical Analysis of Contact Problems.

C. Miehe, E. Stein, P. Wriggers (1988): A General Concept for Thermomechanical Coupling.

E. Stein, D. Bischoff, N. Müller-Hoppe, W. Wagner, P. Wriggers (1988): Five Lectures on Nonlinear Finite Element Methods.

E. Stein, W. Wagner, P. Wriggers (1988): Concepts of Modeling and Discretization of Elastic Shells for Nonlinear Finite Element Analysis.

P. Wriggers, T. vu Van, E. Stein (1987): Zur Berechnung von Stoßvorgängen bei Rahmentragwerken.

P. Wriggers (1987): On Consistent Tangent Matrices for Frictional Contact Problems.

W. Wagner, P. Wriggers, E. Stein (1986): A Shear-Elastic Shell Theory and Finite-Element-Postbuckling Analysis including Contact.

E. Stein, W. Wagner, P. Wriggers (1986): Postbuckling Analysis of Stability Problems with Nonlinear Contact Constraints.

K.-D. Klee, E. Stein, P. Wriggers (1985): Traglastuntersuchungen ebener Stabtragwerke bei großen Verschiebungen und Verdrehungen.

P. Wriggers, J.C. Simo, R.L. Taylor (1985): Penalty and Augmented Lagrangian Formulations for Contact Problems.

E. Stein, P. Wriggers (1981): Incremental Calculations of Frictional Impact-Contact Problems with Application to Elastic Rods and Shells.

R. L. Taylor, P. Wriggers (1999): Smooth surface discretization for large deformation frictionless contact.

O. Scherf, G. Bugeda, E. Onate, P. Wriggers (1996): Investigation of impact problems via adaptive finite element methods.

P. Wriggers, M. Imhof (1996): Thermo-Kontakt.

M. Küssner, P. Wriggers, L. Bernspang, A. Samuelson (1995): Mixed methods in finite element plasticity.

J. Korelc, P. Wriggers (1995): Improved enhanced strain four node element with Taylor expansion of shape functions.

S. Heimer, C. Leppin, D. Gross, P. Wriggers (1995): Untersuchung des bruchdynamischen Verhaltens von Rissen in viskoplastischen Materialien.

O. Scherf, P. Wriggers (1995): Adaptive Methoden für Kontaktprobleme.

P. Wriggers, S. Meynen (1994): Tätigkeitsbericht Darmstadt zum Forschungsvorhaben Wr 19/5-1 Parallele Iterationsverfahren.

P. Wriggers, M. Imhof (1992): Thermo-Kontakt.

E. Stein, K.-D. Klee, P. Wriggers, F. Gadiel (1989): Rechnergestützte Traglastberechnung von Stahlbetonplattenbalken und -rahmen.

E. Stein, P. Wriggers, T. Wedemeier, T. vu Van (1989): Materialgesetze zum Verhalten von Betonkonstruktionen bei harten Stößen.

P. Wriggers (1988): Konsistente Linearisierungen in der Kontinuumsmechanik und ihre Anwendung auf die Finite-Element-Methode.

E. Stein, P. Wriggers, T. vu Van (1986): Nichtlineare Stoß- und Kontaktprobleme und ihre inkrementelle numerische Behandlung.

P. Wriggers (1985): Die Behandlung der Inkompressibilität mit gemischten finiten Elementen oder der selektiv- reduzierten Integration.

Mazzucki, Griebenow, Klee, Rose, Stein, Vogel, Wriggers (1984): Entwurf einer Richtlinie für das Aufstellen und Prüfen von elektronischen Standsicherheitsnachweisen.

P. Wriggers, B. Nour-Omid (1984): Solution Methods for Contact Problems.

P. Wriggers (1984): Thermomechanischer Kontakt.

P. Wriggers (1981): Zur Berechnung von Kontakt- und Stoßproblemen elastischer Körper mit Hilfe der Finite-Element-Methode.

P. Wriggers, J. Grüne, U. Sparboom (1976): Voruntersuchungen zum Schwingungsverhalten des Grossen Wellenkanals, Teilprojekt C1.

H. Wessels (2020): Vision: A Digital Twin for Additive Manufacturing,  Machine Learning + X Seminar, CRUNCH Group, Brown University

T. Bode, C. Weißenfels, P. Wriggers (2019): Peridynamic Petrov-Galerkin method: A generalization of the peridynamic theory of correspondence materials,  90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019), Vienna, Austria, 18-22 February 2019

T. Bode, C. Weißenfels, P. Wriggers (2019): The Peridynamic Petrov Galerkin Method-A Generalized Peridynamic Correspondence Formulation for Finite Elasticity and Fluid Flows,  VI International Conference on Particle-Based Methods (Particles 2019), Barcelona, Spain, 28-30 October 2019

T. Bode, C. Weißenfels, P. Wriggers (2019): Peridynamic Petrov-Galerkin for Finite Elasticity,  Thematic Conference of the European Community in Computational Methods in Applied Sciences on eXtended Discretization MethodS for partial differential equations on complex and evolving domains (X-DMS 2019), Lugano, Switzerland 03-05 July 2019

M. Chaudry, C. Woitzik, C. Weißenfels , A. Düster, P. Wriggers (2019): Numerical modeling of ship collision with coupled DE-FE approach, International Centre for Numerical Methods in Engineering (Marine), Gothenburg, Sweden, 13-15 May

M. Gierig, M. Marino, P. Wriggers (2019): A Continuum Model for Soft Biological Tissues: Collagen Damage Coupled with Growth and Remodeling,  4th International Conference on Biomedical Technology, Hannover, Germany

M. Marino, M. Gierig, P. Wriggers (2019): Growth-and-Remodelling and Injury in Arterial Tissues: Chemo-Mechano-Biological Modelling,  25th Congress of the European Society of Biomechanics, Vienna, Austria

M. Gierig, M. Marino, P. Wriggers (2019): A Computational Model for Biological Tissues Considering the Influence of Injury on Growth and Remodelling,  90th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Vienna, Austria

M. Gierig, M. Marino, P. Wriggers (2019): Continuum Modeling the Behavior of Soft Biological Tissues During and Due to Unphysiological Loading (poster presentation),  16th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, New York, USA

A. Hajikhani, M. Marino, and P. Wriggers (2019): Multiphysics modelling of chemomechanically smart hydrogels,  International Conference on Biomedical Technology, Hannover

M. Marino, A. Hajikhani, and P. Wriggers (2019): Computational methods for the design of bioprinting protocols: challenges and opportunities,  International Conference on Biomedical Technology, Hannover

A. Hajikhani, M. Marino, and P. Wriggers (2019): A chemo-mechanical model for hydrogel gelation: coupling of fluid swelling, crosslinking shrinkage and reactive-diffusive mechanisms,  15th International Conference on Computational Plasticity - COMPLAS 2019, Barcelona, Spain.

M. Marino, A. Hajikhani, and P. Wriggers (2019): Modelling the Chemomechanics of Hydrogels Gelation: Reactive-Diffusive Processes and Swelling-Shrinking Mechanisms,  International Conference on Simulation for Additive Manufacturing - Sim-AM 2019, Pavia, Italy.

T. Wang (2019): Finite Element Analysis on Mechanical Behavior of 3D Bio-printed Alginate Scaffold during the Crosslinking,  Master Study Project

A. Ricker, N.H. Krӧger, M. Ludwig, R. Landgraf, J. Ihlemann (2019): Validation of a hyperelastic modelling approach for cellular rubber,  11th European Conference on Constitutive Models for Rubber
ISBN: 9780367342586

A. Ricker, N.H. Kröger (2019): Influence of various curing systems and carbon black content on the bulk modulus of EPDM rubber,  11th European Conference on Constitutive Models for Rubber
ISBN: 9780367342586

A. Ricker, N.H. Kröger (2019): Experimentelle Untersuchung und Modellierung von Moosgummi,  Workshop Stochastische Mikrostrukturen in Experiment und Simulation (veranstaltet vom AK Mikrostrukturmechanik des FA Materials Modelling, Simulation and Data der DGM)

M. Baldrich, S. Löhnert, P. Wriggers (2018): Developing a model for the microscopic material behaviour of a tailored formed joining zone of an aluminium-steel hybrid solid component,  89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2018), Munich, Germany, 19-23 March 2018

H. Wessels, T. Bode, C. Weißenfels, P. Wriggers (2018): Metal Particle Melting Analysis for Additive Manufacturing Using the Stabilized Optimal Transportation Method,  89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2018), Munich, Germany, 19-23 March 2018

F. Töller, S. Löhnert, P. Wriggers (2018): Bulk material models in cohesive zone elements,  89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2018), Munich, Germany, 19-23 March 2018

M. Gierig, M. Marino, P. Wriggers (2018): Multiphysics modelling of damage-induced response in arterial tissue: a computational framework for in-stent restenosis,  Virtual Physiological Human Conference, Zaragoza, Spain

M. Marino, M. Gierig, M. Rolf-Pissarczyk, P. Wriggers (2018): Computational strategies for chemo-mechano-biological response to arterial injury,  13th World Congress on Computational Mechanics, New York, USA

M. Gierig, M. Marino, P. Wriggers (2018): A Chemo-mechano-biological Approach for the Computational Modelling of In-stent Restenosis,  10th European Solid Mechanics Conference, Bologna, Italy

M. Gierig, M. Marino, P. Wriggers (2018): A Multiphysics Approach for Modelling the Response of Arterial Tissue to Stent-induced Mechanical Injury (poster presentation),  8th World Congress of Biomechanics, Dublin, Ireland

T. Bode, C. Weißenfels (2018): Künstliche Intelligenz, Cyber-physische Systeme und der Digitale Zwilling,  VDI-Spezialtag "Künstliche Intelligenz und Digitaler Zwilling in der Fahrzeugberechnung", Baden-Baden, Germany, 19 November 2018

A. Hajikhani, M. Marino, M. Conti, F. Scocozza, F. Auricchio and P. Wriggers (2018): Computational Modeling of Alginate Hydrogel Gelation for Bioprinting Applications,  Conference on Mechanical Engineering and Mechatronics at 8th World Congress of Biomechanics "WCB 2018", Dublin, Ireland.

B. T. Hermawan (2018): Multi-Scale Modelling and Mechanical Analysis of Cell-Encapsulated Alginate.,  B.Sc. thesis

A. Ricker (2018): Hyperelastic Modelling and Experimental Characterisation of Cellular Rubber,  13th Fall Rubber Colloquium

A. Ricker, N.H. Kröger, M. Ludwig, R. Landgraf, J. Ihlemann (2018): Hyperelastic modelling and experimental characterisation of cellular rubber,  6th European Conference on Computational Mechanics

M. Baldrich, S. Löhnert, P. Wriggers (2018): Micromechanical thermoplastic material model for aluminium in a continuum mechanics framework,  6th International Symposium on Computational Mechanics of Polycrystals (CMCn 2018), Düsseldorf, Germany, 17-18 September 2018

M. Baldrich, S. Löhnert, P. Wriggers (2018): Describing the material behaviour of a tailored formed joining zone of an aluminium-steel hybrid solid component on a microscopic length scale,  6th European Conference on Computational Mechanics (ECCM 6), Glasgow, UK, 11-15 June 2018

F. Töller, S. Löhnert, P. Wriggers (2018): Material model for a composite with ductile and brittle constituents,  6th European Conference on Computational Mechanics (ECCM 6), Glasgow, UK, 11-15 June 2018

A.-K. Krüger, S. Julmi, C. Klose, S. Besdo, H. J. Maier, P. Wriggers (2018): Simulation of bone ingrowth into bone substitutes on implant level length scale,  89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2018), Munich, Germany, 19-23 March 2018

T. Steiner, P. Wriggers (2018): The novel discontinuous Petrov-Galerking Finite Element Method for nearly incompressible material behaviour in solid mechanics,  89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2018), Munich, Germany, 19-23 March 2018

T. Steiner, P. Wriggers (2018): The novel discontinuous Petrov-Galerkin Finite Element Method: application to small and large deformations in solid mechanics,  6th European Conference on Computational Mechanics (ECCM 6), Glasgow, UK, 11-15 June 2018

M. Chaudry, C. Woitzik, A. Düster, P. Wriggers (2018): Computational modelling of particle filled structures with application in ship building, 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2018), Munich, Germany, 19-23 March 2018

M. Chaudry, C. Woitzik, C. Weißenfels , A. Düster, P. Wriggers (2018): Numerical modelling of collision of particle-filled structures,6th European Conference on Computational Mechanics (ECCM 6), Glasgow, UK, 11-15 June 2018

M. Chaudry, C. Woitzik, C. Weißenfels , A. Düster, P. Wriggers (2018): Computational modelling of ship collision, Contact Mechanics International Symposium (CMIS) Oropa,Italy. May 16-18, 2018

M. A. Chaudry, C. Woitzik, A. Düster, P. Wriggers (2017): Numerical simulation of granular materials during confined compression, 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2017), Weimar, Germany, 6-10 March 2017

M. A. Chaudry, C. Weißenfels, A. Düster, P. Wriggers (2017): Computational modelling of granular materials during confined compression, 5th International Conference on Computational Contact Mechanics (ICCCM), Lecce, Italy July 5-7, 2017

H. Wessels, C. Weißenfels, P. Wriggers (2017): Metal Particle Melting for Powder Based Additive Manufacturing Using Optimal Transportation Meshfree Method,  88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2017), Weimar, Germany, March 6-10, 2017

H. Wessels, C. Weißenfels, P. Wriggers, T. I. Zohdi (2017): Metal Particle Melting and Solidification for Powder Based Additive Manufacturing Using Optimal Transportation Meshfree Method,  IUTAM/AMERIMECH Symposium on Computational Mechanics of Particle-Functionalized Fluid and Solid Materials for Additive Manufacturing and 3D Printing Processes, Berkeley, USA, May 30-31, 2017

A.-K. Krüger, S. Julmi, C. Klose, S. Besdo, H. J. Maier, P. Wriggers (2017): Simulation der Degradation schwammähnlicher Strukturen aus Magnesiumlegierungen als Knochenersatzmaterial,  Jahrestagung der Deutschen Gesellschaft für Biomechanik 2017, Hannover, Germany, 29-31 March 2017

H. Wessels, C. Weißenfels, P. Wriggers, T. I. Zohdi (2017): Melting and Solidification of Powder Based Additive Manufacturing Using Optimal Transportation Meshfree Method,  Simulation for Additive Manufacturing, Munich, Germany, October 11-13, 2017

H. Wessels, C. Weißenfels, P. Wriggers (2017): Metal Particle Melting Using Optimal Transportation Meshless Method,  Berkeley/Stanford CompFest 2017, Berkeley, USA, April 8, 2017

D. Huang, C. Weißenfels, P. Wriggers (2017): Numerical Simulation of Contact using Optimal Transportation Meshfree (OTM) Method,  88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2017), Weimar, Germany, 6-10 March 2017

D. Huang, C. Weißenfels, P. Wriggers (2017): Simulation of Ductile Damage and Fracture at Finite Strain by Optimal Transportation Meshfree (OTM) method,  XIV International Conference on Computational Plasticity (COMPLAS 2017), Barcelona, Spain, 5-7 September 2017

W. T. Rust, P. Wriggers, B. Hudobivnik, B. D. Reddy (2017): A Virtual Element Method for Large Deformation Contact,  88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2017), 06-10 March 2017, Weimar, Germany

W.T. Rust, P. Wriggers, B. Hudobivnik, B.D. Reddy (2017): A Virtual Element Method for Large Deformation Contact,  Polytopal Element Methods in Mathematics and Engineering (POEMS 2017), 5-7 July, Milano, Italy

W.T. Rust, P. Wriggers, B. Hudobivnik, B.D. Reddy (2017): A Virtual Element Method for Large Deformation Contact,  Modern Finite Element Technologies (MFET 2017), 21-23 August, Bad Honnef, Germany

M. Marino, P. Wriggers (2017): A novel finite-element multiscale formulation for microstructured soft materials with crimped fibers ,  23rd Congress of the Italian Association of Theoretical and Applied Mechanics (04.09.17 - 07.09.17, Salerno, Italy)

M. Marino, D. Bianchi, G. Pontrelli, G. Vairo, P. Wriggers (2017): Analysis of arterial multiphysics via a novel chemo-mechano-biological model,  3rd Soft Tissue Modelling Workshop (07.06.17 - 09.06.17, Glasgow, UK)

M. Marino, D. Bianchi, G. Vairo, P. Wriggers (2017): Arterial physiopathological remodeling: a framework for investigating the role of molecular transport and multiscale constitutive response,  3rd International Conference on Biomedical Technology, ECCOMAS Thematic Conference (06.11.17 - 08.11.17, Hannover, Germany)

T. Steiner, P. Wriggers, F. Hellwig, C. Carstensen (2017): A low-order discontinuous Petrov-Galerkin Finite Element Method,  88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2017), Weimar, Germany, 6-10 March 2017

T. Steiner, P. Wriggers, F. Hellwig, C. Carstensen (2017): A low-order discontinuous Petrov-Galerkin Finite Element Method,  Modern Finite Element Technologies (MFET 2017), Bad Honnef, Germany, 21-23 August 2017

M. Chaudry, C. Woitzik, A. Düster, P. Wriggers (2017): Numerical simulation of granular materials during confined compression, 5th International Conference on Particle-Based Methods (Particles 2017), Hannover, Germany

T. Steiner, P. Wriggers (2017): A primal discontinuous Petrov-Galerkin Finite Element Method,  7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry (GACM 2017), Stuttgart, Germany, 11-13 October 2017

M. Marino, M. von Hoegen, J. Schröder, P. Wriggers (2017): Constitutive response and structure of soft biological tissues: direct and inverse identification of parameters ,  88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (6.03.2017 - 10.03.2017, Weimar, Germany)

M. Baldrich, S. Löhnert, P. Wriggers (2017): Modelling the thermoplastic material behaviour of a tailored formed joining zone on a microscopic length scale,  XIV International Conference on Computational Plasticity (COMPLAS 2017), Barcelona, Spain, 5-7 September 2017

M. Marino (2017): Arterial pathophysiology: a chemo-mechano-biological perspective,  Perspective talk at the 23rd Congress of the European Society of Biomechanics (02.07.17 - 05.07.17, Seville, Spain)

F. Töller, S. Löhnert, P. Wriggers (2017): Modelling the thermoplastic material behaviour of a tailored formed joining zone on a macroscopic length scale,  XIV International Conference on Computational Plasticity (COMPLAS 2017), Barcelona, Spain, 5-7 September 2017

M. Marino, P. Wriggers (2017): A chemo-mechano-biological approach for multiphysics arterial pathophysiology: from cell-cell signalling pathways to multiscale tissue mechanics ,  10. Jahrestagung der Deutschen Gesellschaft für Biomechanik (29.03.17 - 31.03.17, Hannover, Germany)

M. Pezeshki, S. Löhnert, P. Wriggers (2017): 3D Fracture modeling by extended finite element method and gradient enhanced damage,  88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2017), Weimar, Germany, 6-10 March 2017

M. Marino, P. Wriggers (2017): In silico assessment of individualized implants: a chemo-mechano-biological approach for arterial pathophysiology ,  Jahrestagung der BIOMEDIZINISCHEN TECHNIK und Dreiländertagung der MEDIZINISCHEN PHYSIK (10.09.17 - 13.09.17, Dresden, Germany)

M. Pezeshki, S. Löhnert, P.-A. Guidault, E. Baranger, P. Wriggers (2017): Dynamic brittle fracture by XFEM and gradient-enhanced damage,  International Conference on Computational Fracture and Failure of Materials and Structures (CFRAC 2017), 14-16 June 2017, Nantes, France

M. Baldrich, S. Löhnert, P. Wriggers (2017): Modelling the thermoplastic material behaviour of a tailored formed joining zone on a microscopic length scale with focus on the steel component,  88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2017), Weimar, Germany, 6-10 March 2017

A.-K. Krüger, S. Julmi, C. Klose, S. Besdo, P. Wriggers (2017): Simulation of the Change in Mechanical Properties of Degradable Bone Implants,  7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry (GACM 2017), Stuttgart, Germany, 11-13 October 2017

A.-K. Krüger, S. Julmi, C. Klose, S. Besdo, H. J. Maier, P. Wriggers (2017): Simulation of the Degradation of Bone Implants using Finite Element Method,  Third ECCOMAS thematic conference on Biomedical Technology (ICBT 2017), Hannover, Germany, 6-8 November 2017

A. B. Harish and P. Wriggers (2016): Towards a Multiscale Approach to Modeling Nanoparticle Reinforced Elastomers,  Workshop on Multiscale Modeling and Model Reduction, Aachen, Germany (Jun, 2016)

Steffen Beese, Stefan Loehnert and Peter Wriggers (2016): Modeling of fracture in polycrystalline materials with the XFEM,  7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), Crete, Greece, 5-10 June 2016

P. Wriggers, J. Schroeder, and F. Auricchio (2016): Finite element formulations for large strains in anisotropic materials,  keynote lecture, ECCOMAS 2016, Crete

M. Chaudry, C. Woitzik, C. Weißenfels, A. Düster, P. Wriggers (2016): DEM-FEM coupled numerical investigation of granular materials to increase crashworthiness of double-hull vessels,  87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2016), Braunschweig, Germany, 7-11 March 2016

M. Shahbaz, P. Wriggers (2016): Micromechanical modeling of crack propagation along the interface delamination in dental composite materials,  15th edition of the European Mechanics of Materials Conference (EMMC15), Brussels, Belgium, 7-9 September 2016

M. Pezeshki, S. Löhnert, P. Wriggers (2016): 3D Crack Propagation by The Extended Finite Element Method and a Gradient Enhanced Damage Model ,  Special Workshop Multiscale Modeling of Heterogeneous Structures. 21.-23. Sept. 2016, Dubrovnik, Kroatien.

M. Shahbaz, P. Wriggers (2016): Microscale modeling of crack propagation in dental composite materials,  87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2016), Braunschweig, Germany, 7-11 March 2016

J.-P. Fürstenau, B. Avci and P. Wriggers (2016): A semi‐implicit multi‐fluid SPH algorithm suitable for GPU,  87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2016), Braunschweig, Germany, 7-11 March 2016

P. Wagner, P. Wriggers, H. Clasen, C. Prange (2016): Validation of a multiscale FEM approach for elastomer friction on rough surfaces,  8th Contact Mechanics International Symposium (CMIS 2016), Warsaw, Poland, 11-13 May 2016

Stefan Löhnert (2016): A regularization technique for the XFEM: extension to finite deformations, inelastic material behaviour, material instabilities and multifield problems ,  87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2016), Braunschweig, Germany, 7-11 March 2016

P. Wagner, P. Wriggers, H. Clasen, C. Prange (2016): Multiscale FEM approach for hysteresis friction and adhesion of rubber on rough surfaces,  7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), Crete, Greece, 5-10 June 2016

Peter Wriggers, S. Zeller, S. Beese and S. Löhnert (2016): A Multiscale Approach for Modeling Thermoplastic Material Behaviour of Dual-Phase Steels - From Microscopic to Macroscopic Length Scale,  Plenary Lecture at the World Congress of Computational Mechanics, WCCM & APCOM, Seoul, 2016

P. Wriggers (2016): Material Modeling based on Multiscale Analyis,  University of Cape Town

T. Steiner, P. Wriggers, C. Carstensen (2016): Two-dimensional discontinuous Galerkin & discontinuous Petrov Galerkin Method,  87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2016), Braunschweig, Germany, 7-11 March 2016

T. Steiner, P. Wriggers (2016): A discontinuous Galerkin Finite Element Method for linear elasticity using a mixed integration scheme,  7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), Crete, Greece, 5-10 June 2016

W.T. Rust, P. Wriggers, B.D. Reddy (2016): The Virtual Element Method for Large Deformation Contact ,  7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), Crete, Greece, 5-10 June 2016

W.T. Rust, P.Wriggers, B.D. Reddy (2016): The Virtual Element Method and its application on adaptive mesh refinement ,  Special Workshop Multiscale Modeling of Heterogeneous Structures (MUMO) 2016, Dubrovnik, Croatia, September 21-23, 2016

S. Zeller, S. Loehnert, P. Wriggers (2016): Modelling the Thermoplastic Material Behaviour of Dual-Phase Steels on a Microscopic Length Scale,  87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2016), Braunschweig, Germany, 7-11 March 2016

Stefan Löhnert (2016): Stabilizing the XFEM: Extension to finite deformations, inelastic material behaviour, material instabilities and multifield problems,  7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), Crete, Greece, 5-10 June 2016

H. Wessels, C. Weißenfels, P. Wriggers (2016): Simulation of Selective Laser Melting Processes,  Workshop Additive Manufacturing Quantifiziert, Hannover, 22 September 2016

A. B. Harish and P. Wriggers (2015): Abrasive Wear: Towards a Multiscale Approach,  26th Annual Robert J. Melosh Symposium, Durham, USA, 24-Apr-2015

P. Wagner, P. Wriggers, C. Klapproth, C. Prange (2015): A multiscale contact homogenization approach for hysteresis friction of rubber on rough surfaces,  86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2015), Lecce, Italy, 23-27 March 2015

P. Wagner, P. Wriggers, C. Klapproth, C. Prange (2015): Thermomechanical Multiscale FEM Approach for Sliding Elastomers on Rough Surfaces,  6th Edition of the International Conference on Computational Methods for Coupled Problems in Science and Engineering (Coupled Problems 2015), San Servolo, Venice, Italy, 18-20 May 2015

P. Wagner, P. Wriggers, C. Prange (2015): Thermomechanical Multiscale FEM Approach for Sliding Elastomers on Rough Surfaces,  4th International Conference on Computational Contact Mechanics (ICCCM15), Hanover, Germany, 27-29 May 2015

W.T. Rust, P. Wriggers, B.D. Reddy (2015): Application of the virtual element method to non-conforming contact interfaces ,  3rd Eccomas Young Investigators Conference, July 20-23, 2015, RWTH Aachen

Steffen Beese, Stefan Loehnert and Peter Wriggers (2015): 3D ductile crack propagation with the XFEM ,  86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2015), Lecce, Italy, 23-27 March 2015

Stefan Loehnert (2015): Stabilizing the XFEM for static and dynamic fracture simulations,  X-DMS 2015, eXtended Discretization Methods, Ferrara, Italy, September 9-11, 2015

Artsem Kunin, Stefan Loehnert and Peter Wriggers (2015): A multiscale projection method for the thermomechanical simulation of the interaction of microcracks with a macrocrack,  X-DMS 2015, eXtended Discretization Methods, Ferrara, Italy, September 9-11, 2015

W.T. Rust, P. Wriggers, B.D. Reddy (2015): Application of the virtual element method to non-conforming contact interfaces ,  Thematic Conference on eXtended Discretization MethodS, September 9- 11, 2015, Ferrara

W.T. Rust, P. Wriggers, B.D. Reddy (2015): Application of the virtual element method to non-conforming contact interfaces ,  86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2015), Lecce, Italy, 23-27 March 2015

W.T. Rust, P. Wriggers, B.D. Reddy (2015): Application of the virtual element method to non-conforming contact interfaces,  8th International Congress of Croatian Society of Mechanics (8th ICCSM), 29 September - 3 October 2015, Opatija, Croatia

S. Zeller, S. Loehnert, P. Wriggers (2015): Modelling the Thermoplastic Material Behaviour of Dual-Phase Steels on a Microscopic Length Scale and Deducing Corollaries for Material Models on a Macroscopic Length Scale,  COMPLAS 2015, Barcelona, Spain

Steffen Beese, Stefan Loehnert, Peter Wriggers (2015): Crack Propagation in poly crystalline materials,  X-DMS 2015, eXtended Discretization Methods, Ferrara, Italy, September 9-11, 2015

S. Zeller, S. Loehnert, P. Wriggers (2015): Modelling the Thermoplastic Material Behaviour of Dual-Phase Steels on a Microscopic Length Scale,  GAMM 2015, Lecce, Italy

S. Zeller, S. Loehnert, P. Wriggers (2015): Modellierung der Temperaturentwicklung während der Blechmassivumformung unter Berücksichtigung der Mikrostruktur des Werkstoffes,  Norddeutsches Mechanik-Kolloquium, Hannover, Germany

S. Yazdani, W.J.H. Rust, P. Wriggers (2015): An extended finite element model for the delamination analysis of composite laminates,  18th International Conference on Composite Structures (ICCS18), At Lisbon, Portugal

P. Dziewiecki, C. Weißenfels, P. Wriggers (2015): Verification of a contact layer element for soil-structure interaction within Abaqus software environment,  4th International Conference on Computational Contact Mechanics (ICCCM15), Hanover, Germany, 27-29 May 2015

A. B. Harish and P. Wriggers (2015): Abrasive Wear: Towards a Multiscale Approach,  4th International Conference on Computational Contact Mechanics (ICCCM15), Hanover, Germany, 27-29 May 2015

P. Wagner, P. Wriggers, C. Klapproth (2014): A multiscale contact homogenization technique for rubber friction on rough surfaces,  7th Contact Mechanics International Symposium (CMIS 2014), Abu Dhabi, United Arab Emirates, 03-05 February 2014

M. Anndif , P. Wriggers (2014): Reduced Order Model for Nonlinear Structural Mechanics,  Workshop on Recent Trends and Future Developments in Computational Science and Engineering, March 26-28, 2014,Plön, Germany

P. Dziewiecki, C. Weißenfels, P. Wriggers (2014): Modeling of soil-structure interaction by applying a hypoplastic material behavior within mortar contact formulation,  3rd International Workshop of the Research Group Holistic Simulation of Geotechnical Installation Processes, Karlsruhe, Germany, March 6.-7.2014

P. Wagner, P. Wriggers, C. Klapproth, C. Prange (2014): Multiscale FEM approach for rubber friction on rough rigid surfaces,  14th European Mechanics of Materials Conference (EMMC-14), Gothenburg, Sweden, 27-29 August 2014

S. Zeller, S. Loehnert, P. Wriggers (2014): Modelling the temperature development during sheet-bulk-metal forming considering the microstructure of the material,  GAMM 2014, Erlangen, Germany

Stefan Loehnert (2014): Stabilizing the XFEM: A simple technique to regularize nearly singular extended finite elements ,  85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2015), Erlangen, March 10-14, 2014

A. B. Harish and P. Wriggers (2014): Multiscale-Multiphysics Modeling of Processes,  Young Investigators Meet, Hannover, Germany, (Nov, 2014)

A. B. Harish and P. Wriggers (2014): Modeling Abrasive Wear: Towards and Multiscale Fracture Approach,  11th World Congress on Computational Mechanics (WCCM XI), Barcelona, Spain, 20-25 July 2014

A. B. Harish and P. Wriggers (2014): Multiscale Multiphysics Outlook to Modelling Abrasive Wear,  6th Contact Mechanics International Symposium (CMIS 2014), Abu Dhabi, United Arab Emirates, 03-05 February 2014

P. Wagner, P. Wriggers, C. Klapproth, C. Prange (2014): Multiscale FEM for rubber friction on rough surfaces,  11th World Congress on Computational Mechanics (WCCM XI), Barcelona, Spain, 20-25 July 2014

J.-H. Dobberstein and P. Wriggers (2013): Methods to stabilize demolding simulations,  3rd International Conference on Computational Contact Mechanics, Lecce, Italy, 10-12 July 2013

P. Wagner, F. Schmerwitz, H. Lind, B. Wies (2013): Link between wear and surface topology for a sliding rubber sample,  32nd Annual Meeting and Conference on Tire Sience and Technology of The Tire Society, Akron, Ohio, USA, 10-11 September 2013

C. Prange, S.Loehnert, P. Wriggers (2013): Discretization and model adaptivity for the multiscale XFEM simulation of arbitrary crack geometries using unstructured meshes,  Third International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Prag, 05. - 07. Juni 2013

N. Hajibeik, L. de Lorenzis, P. Wriggers (2013): Isogeometric Analysis of Delamination in Composites,  Third International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Prague, 05. - 07. Juni 2013

N. Hajibeik, L. de Lorenzis, P. Wriggers (2013): Isogeometric Analysis of Mixed–Mode Delamination in Composites,  3rd International Conference on Computational Contact Mechanics- ICCCM, Lecce, Italy, 10- 12 July 2013

A. B. Harish and P. Wriggers (2013): Formulation of 3D Nonlocal Cohesive Zone Model for Finite Thickness Interfaces: Application to Crack Modeling in Filled Elastomeric Materials,  3rd International Conference on Computational Contact Mechanics- ICCCM, Lecce, Italy, 10- 12 July 2013

M. Anndif, P.Wriggers (2013): Model Reduction by using Dynamic-POD,  2nd International Workshop on Reduced Basis, POD and PGD model , November 3-6, 2013, BLOIS CASTLE, france.

M. Weidling, S. Besdo, T. Schilling, M. Bauer, T. Hassel, A. Haverich, P. Wriggers (2013): Finite element simulation of myocardial stabilising structures and development of new designs,  BMT 2013. 3-Ländertagung der Fachgesellschaften ÖGBMT/SGBT/DGBMT. Graz, 19.-21.09.2013

T. Gerasimov (2013): Error‐controlled adaptive damage‐to‐fracture approach for modeling a complex failure in quasi‐brittle materials, 12th US National Congress on Computational Mechanics (USNCCM 12), July 22-25, Raleigh, USA | Datei |

S. Zeller, S. Loehnert, P. Wriggers (2013): Modelling the temperature development during sheet-bulk-metal forming using material isomorphism,  COMPLAS 2013, Barcelona, Spain

S. Zeller, S. Loehnert, P. Wriggers (2013): Modelling the temperature development during sheet-bulk-metal forming using material isomorphism,  GAMM 2013, Novi Sad, Serbia

A. B. Harish and P. Wriggers (2013): Micromechanical Model for Mullins Effect Induced Anisotropic Damage in Filled Elastomers,  12th US National Congress on Computational Mechanics (USNCCM 12), July 22-25, Raleigh, USA

A. B. Harish and P. Wriggers (2013): Computational Implementation of Finite Thickness Nonlocal Cohesive Zone Element for Crack Propagation in Filled Elastomers,  German Association for Computational Mechanics Symposium, Hamburg, Germany, 02-04 Oct (2013) (Note: The work was also presented as a poster & was awarded the best poster award)

M. Weidling, S. Besdo, T. Schilling, M. Bauer, Fr.-W. Bach, H. J. Maier, A. Haverich, P. Wriggers, T. Hassel (2013): Development of magnesium alloy scaffolds to support biological myocardial grafts - A finite element investigation,  International Conference on Biomedical Technology. European Community on Computational Methods in Applied Sciences (ECCOMAS). Hannover, 20.-22.11.2013.

D. Gottschalk, C.B. Hirschberger, A. McBride, B.D. Reddy and P. Wriggers (2013): A Model of Gradient Crystal Plasticity at Finite Deformations,  12th International Conference on Computational Plasticity (COMPLAS XII), Barcelona, 3-5 September 2013

D. Gottschalk, A. McBride, C.B.Hirschberger, B.D. Reddy, P. Wriggers (2013): Micromechanics of Nanoindentation: A Model of Gradient Crystal Plasticity at Finite Deformations,  Annual Meeting of the DFG International Research Training Group 1627,30 September - 2 Oktober 2013, Hannover

D. Gottschalk, E. Lehmann, H. Clasen (2013): Plastizitätsmodelle zur Beschreibung metallischer Mikrostrukturen,  Industry meets University. Scientific Exchange between Airbus and the graduate school MUSIC on selected topics in the field of mechanics and numerical mechanics, 25 April 2013

H. Clasen, C. B. Hirschberger, J. Korelc, P. Wriggers (2013): FE²-homogenization of micromorphic elasto-plastic materials,  12th International Conference on Computational Plasticity (COMPLAS XII), Barcelona, 3-5 September 2013

C. Prange, S. Loehnert, P. Wriggers (2013): Model adaptivity within a 3D multiscale context for XFEM for cracks,  GAMM 84rd Annual Meeting, Novi Sad, 18. - 22. März 2013

T. Gerasimov (2012): New simple, cheap and efficient error estimator for adaptive fracture and damage analysis (in 2D), IKM Seminar, December 17, 2012 | Datei |

D. Gottschalk, C.B. Hirschberger, L. Champaney (2012): Micromechanics of Nanoindentation: Crystal Plasticity Simulation and Experiment,  Annual Meeting of the DFG International Research Training Group 1627, 20-22 September 2012, Wangerooge

E. Lehmann, S. Loehnert, P. Wriggers (2012): About the Microstructural Effects of Polycrystalline Materials and their Macroscopic Representation at Finite Deformation,  GAMM 83rd Annual Meeting, Darmstadt, 26-30 March 2012

M. Paggi, E. Lehmann, C. Weber, A. Carpinteri, P. Wriggers (2012): 3D vs. 2D Modelling of Cracking and Plasticity in Polycrystalline Materials,  10th World Congress on Computational Mechanics, Sao Paulo, 3-13 July, 2012

H. Clasen, C. B. Hirschberger (2012): On Softening and Damage in Gradient-Based Multifield Inelasticity,  8th European Solid Mechanics Conference, Graz, 09-13 July 2012

C. Prange, S. Loehnert, P. Wriggers (2012): Recovery based error estimation for 3D multiscale computations within the XFEM for cracks,  GAMM 83rd Annual Meeting, Darmstadt, 26-30 März 2012

C. Prange, S. Loehnert, P. Wriggers (2012): Discretisation error estimation and model adaptivity within 3D multiscale XFEM for cracks,  European Solid Mechanics Conference, Graz, 9. - 13. Juli 2012

N. Hajibeik, I. Temizer, S. Löhnert, P. Wriggers (2012): Scale adaptivity for a multiscale analysis of composite substructures,  6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Vienna, Austria, 10-14 September 2012

H. Clasen, C. B. Hirschberger (2012): On theory and computation of gradient-based multifield inelasticity,  6th European Congress on Computational Methods in Applied Sciences and Engineering, Vienna, 10-14 September 2012

E. Lehmann, S. Schmaltz, D. Faßmann, S. Germain, C. Weber, S. Löhnert, M. Schaper, Fr.-W. Bach, P. Steinmann, K. Willner, P. Wriggers (2012): Material model identification for DC04 based on the numerical modelling of the polycrystalline microstructure and experimental data,  15th ESAFORM Conference, Erlangen, 14-16 March, 2012

E. Lehmann, S. Loehnert, P. Wriggers (2012): Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformations,  6th ECCOMAS Conference, Vienna, 10-14 September. 2012

E. Lehmann, S. Loehnert, P. Wriggers (2012): Towards an Effective Material Model for Elastoplastic Polycrystalline Materials through Homogenisation,  8th European Solid Mechanics Conference, Graz, 9-13 July 2012

H. Clasen, S. Loehnert, P. Wriggers (2011): Simulation of cracked elasto-plastic materials with damage using the Extended Finite Element Method,  4th GACM Colloquium, Dresden, 31 August-02 September 2011

C. Weißenfels and P. Wriggers (2011): Numerical Simulation of Soil-Structure Interactions using Projected Friction Laws,  2nd International Conference on Computational Contact Mechanics (ICCCM), Hannover (Germany), June 15 - June 17, 2011

C. B. Hirschberger, H. Clasen, Joze Korelc and P. Wriggers (2011): Automation of computational homogenization: consistent macro linearization for dissipative microstructures ,  ECCOMAS Special Interest Conference on Trends and Interests in Computational Mechanics 2011, 12–14 September 2011, Padua

D. Gottschalk and C. B. Hirschberger (2011): Micromechanics of Nanoindentation Contact on Polycrystalline Surfaces: Crystal Plasticity Simulation and Experiments,  Kick-Off-Meeting of the DFG International Research Training Group 1627, 28 September - 01 October 2011, Porquerolles, France

J. Korelc, P. Wriggers, C. B. Hirschberger (2011): Automation of FE2 multi-scale method,  11th US National Congress on Computational Mechanics, Minneapolis, USA, 25.–28.07.2011.

C. B. Hirschberger (2011): Micromorphic Continua: Size Effects and Modelling Options,  Seminar of the Centre of Research in Applied Mechanics (CERECAM), University of Cape Town, South Africa 18.03.2011

C. B. Hirschberger (2011): Micromorphic continua in the computational homogenization of microstructured material layers.,  Seminar of the Institute of Mechanics, Technische Universität Clausthal, 26.05.2011

C. Hoppe, S. Loehnert, P. Wriggers (2011): Recovery based error estimation for the discretization error of twoscale crack calculations,  XFEM, ECCOMAS thematic conference, Cardiff, 29 June - 1 July 2011

C. Hoppe, S. Loehnert, P. Wriggers (2011): Twoscale crack calculation with a recovery based error estimation technique for the discretization error in 3D,  USNCCM 11th U.S. National Congress on Computational Mechanics, Minneapolis, 25-28 July 2011

C. B. Hirschberger, J. Korelc and H. Clasen. (2011): A Robust Computational Homogenization Approach to the Modelling of Inelastic Heterogeneous Material Layers,  International Conference on Computational Fracture and Failure of Materials and Structures (CFRAC 2011), Barcelona, 06.-08.June

N. Hajibeik, I, Temizer, S. Löhnert, P. Wriggers (2011): Adaptive Multi-scale Failure Analysis based on Error Estimation,  GAMM 82nd Annual Meeting Graz, 18-21 April 2011

N. Hajibeik, I, Temizer, S. Löhnert, P. Wriggers (2011): Adaptive Multi-scale Failure Analysis based on Error Estimation,  3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites, 21-23th September 2011, Hannover, Germany

N. Hajibeik, I, Temizer, P. Wriggers (2011): Adaptive Multi-scale Analysis in Composites,  University of Tehran, Iran, December 2011

J.-H. Dobberstein, M. Wangenheim, F. Schmerwitz, H. Lind, P. Wriggers, B. Wies (2011): Simulation of the Friction Behavior of Rubber Compounds on Real Road Surfaces,  2nd International Conference on Computational Contact Mechanics (ICCCM 2011), Hannover, 15-17 June 2011

E. Lehmann, S. Loehnert, P. Wriggers (2011): Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformation,  2nd International Conference on Material Modelling, Paris, 31 August - 02 September 2011

E. Lehmann, S. Loehnert, P. Wriggers (2011): Towards the Effective Behaviour of Polycrystalline Microstructures at Finite Strains,  COMPLAS XI., Barcelona, 07-09 September 2011

E. Lehmann, S. Loehnert, P. Wriggers (2011): Towards the Effective Behaviour of Polycrystalline Materials for Sheet Bulk Metal Forming Processes,  ESAFORM, Belfast, 27-29 April 2011

E. Lehmann, S. Loehnert, P. Wriggers (2011): Computational Homogenisation of Polycrystalline Elastoplastic Microstructures at Finite Deformation,  GAMM 82nd Annual Meeting, Graz, 18-21 April 2011

C. Hoppe, S. Loehnert, P. Wriggers (2011): Recovery based error estimation in 2D and 3D for the extended finite element analysis of cracks,  GAMM 82nd Annual Meeting, Graz, 18-21 April 2011

C. Weißenfels and P. Wriggers (2010): Numerical Simulation of Soil-Structure Interactions using Projected Friction Laws,  4th European Conference on Computational Mechanics (ECCM), Paris (France), May 16 - May 21, 2010

C. Weißenfels and P. Wriggers (2010): Numerical Modeling of Soil-Structure Interactions using Projected Friction Laws,  9th World Congress on Computational Mechanics (WCCM), Sydney (Australia), July 19 - July 23, 2010

Reifenrath J., Gottschalk D., Angrisani N., Besdo S., Meyer-Lindenberg A. (2010): New telemetric method for bending force measurement in the rabbit tibia in-vivo,  Kongressbeitrag Biomaterials 2010, Essen

Rittershaus, D. Gottschalk, D., Reifenrath, J., Aljuneidi, W., Flörkemeier, T., Besdo, S., Meyer-Lindenberg, A. (2010): In-vivo monitoring of forces in the loaded rabbit tibia via telemetry as a tool for enhanced implant construction,  Kongressbeitrag EFORT Madrid 2010

C. B. Hirschberger (2010): Computational mechanics of inelastic cohesive interfaces with size effects.,  Multiscale Materials Modelling (MMM 2010), Freiburg, 4.10.–8.10.2010

C. B. Hirschberger (2010): Computational homogenization for heterogeneous cohesive layers incorporating size effects,  Invited Lecture, Young Researchers Minisymposium "Computational Multiscale Modelling of Solids at Failure". GAMM 2010, Karlsruhe. 22.3.–26.3.2010.

C. B. Hirschberger (2010): Computational modelling of size effects based on micromorphic continua,  125. Norddeutsches Mechanik-Kolloquium, Hannover. 7.2.2010.

C. B. Hirschberger (2010): Computational Homogenization of Heterogeneous Microstructured Material Layers,  Finite Elemente im Schnee, Riezlern (Austria) 20.1.–22.1.2010.

C. Hoppe, S. Loehnert, P. Wriggers, E. Stein (2010): Error estimation within the extended finite element analysis of cracks,  GAMM 81st Annual Meeting, Karlsruhe, 22-26 March 2010

E. Lehmann, S. Loehnert, P. Wriggers (2010): Modelling Metals at Finite Deformation,  GAMM 81st Annual Meeting, Karlsruhe, 22-26 March 2010

E. Lehmann et al. (2010): Identifikation eines Materialmodells für den DC04 basierend auf der numerischen Modellierung der polykristallinen Mikrostruktur und experimentellen Daten,  1. Workshop Blechmassivumformung, Erlangen, 13-14 October 2010

J.-H. Dobberstein, R. A. Sauer, P. Wriggers, F. Schmerwitz, M. Wangenheim (2010): An effective computational contact model for hysteretic friction on rough surfaces,  GAMM 81st Annual Meeting, Karlsruhe, 22-26 March 2010

C. Hoppe, S. Loehnert, P. Wriggers, E. Stein (2010): Error estimation within the extended finite element analysis of cracks,  ECCM 4th European Conference on Computational Mechanics, Paris, 16-21 May 2010

C. Weißenfels and P. Wriggers (2009): Numerical Modeling of Electrical Contacts,  13th Congress on the Mathematics of Finite Elements and Applications (MAFELAB), Brunel (United Kingdom), June 9 - June 12, 2009

C. Weißenfels and P. Wriggers (2009): Computational Modeling of Soil-Structure Interactions,  1st International Conference on Computational Contact Mechanics (ICCCM), Lecce (Italy), September 16 - September 18, 2009

C. Weißenfels and P. Wriggers (2009): Numerical Modeling of Friction Laws fro Soil-Structure Interations ,  3rd GACM Colloqium on Computational Mechanics, Hannover (Germany), September 21 - September 23, 2009

Reifenrath J., Gottschalk D., Aljuneidi W., von der Höh N., Flörkemeyer T., Besdo S., Meyer-Lindenberg A. (2009): Neue telemetrische Messmethode zur Erfassung der in-vivo unter Belastung an der Kaninchentibia auftretenden Kräfte; Jahrestagung der deutschen Gesellschaft für Biomechanik,  Jahrestagung der deutschen Gesellschaft für Biomechanik, Münster

C. Weißenfels and P. Wriggers (2008): A Finite Element Algorithm for Electromechanical Contact Problems,  79st Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Bremen (Germany), March 31 - April 4, 2008

C. Weißenfels and P. Wriggers (2008): Numerical Treatment of Coupled Electro- Thermo- Mechanical Effects in Contact Problems,  8th World Congress on Computational Mechanics (WCCM), Venice (Italy) , June 30 - July 5, 2008