Book
2022
Current Trends and Open Problems in Computational Mechanics. / Aldakheel, Fadi; Hudobivnik, Blaz; Soleimani, Meisam et al.
Springer Verlag, 2022.Research output: Book/Report › Anthology › Research › peer review
2019
Formeln und Aufgaben zur Technischen Mechanik 3 : Kinetik, Hydrodynamik. / Gross, Dietmar; Ehlers, Wolfgang; Wriggers, Peter et al.
Springer Berlin Heidelberg, 2019.Research output: Book/Report › Monograph › Research › peer review
Particles 2019 : VI International Conference on Particle-Based Methods - Fundamentals and Applications : 28-30 October, 2019 Barcelona, Spain. / Oñate, Eugenio (Publisher); Wriggers, Peter (Publisher); Zohdi, Tarek I. (Publisher) et al.
Barcelona : International Centre for Numerical Methods in Engineering, CIMNE, 2019. 827 p.Research output: Book/Report › Conference proceeding › Research
2018
Technische Mechanik 4 : Hydromechanik, Elemente der Höheren Mechanik, Numerische Methoden. / Gross, Dietmar; Hauger, Werner; Wriggers, Peter.
10., verbesserte und ergänzte Auflage ed. Springer Berlin Heidelberg, 2018.Research output: Book/Report › Monograph › Research › peer review
Contact modeling for solids and particles. / Popp, Alexander; Wriggers, Peter.
Cham : Springer Nature, 2018. (CISM International Centre for Mechanical Sciences courses and lectures; Vol. Volume 585).Research output: Book/Report › Monograph › Research
International Workshop on Multiscale Modeling of Heterogeneous Structures, MUMO 2016. / Sorić, Jurica; Wriggers, Peter; Allix, Olivier.
Cham : Springer Nature, 2018. 381 p. (Lecture Notes in Applied and Computational Mechanics; Vol. 86).Research output: Book/Report › Monograph › Research
Biomedical Technology : Modeling, Experiments and Simulation. / Wriggers, Peter; Lenarz, Thomas.
Cham : Springer International Publishing AG, 2018. (Lecture Notes in Applied and Computational Mechanics; Vol. 84).Research output: Book/Report › Monograph › Research
2017
Dynamics - Formulas and problems : Engineering mechanics 3. / Gross, Dietmar; Ehlers, Wolfgang; Wriggers, Peter et al.
Springer Berlin Heidelberg, 2017. 246 p.Research output: Book/Report › Monograph › Research › peer review
Formeln und Aufgaben zur Technischen Mechanik 2 : Elastostatik, Hydrostatik. / Gross, Dietmar; Ehlers, Wolfgang; Wriggers, Peter et al.
Springer Berlin Heidelberg, 2017.Research output: Book/Report › Monograph › Research › peer review
Mechanics of Materials : Formulas and Problems - Engineering Mechanics 2. / Gross, Dietmar; Ehlers, Wolfgang; Wriggers, Peter et al.
Springer Berlin Heidelberg, 2017. 212 p.Research output: Book/Report › Monograph › Research › peer review
Academic work
2022
High performance computing for modelling of stereolithography process. / Kumar, Sandeep.
Hannover : Gottfried Wilhelm Leibniz Universität Hannover, 2022.Research output: Thesis › Doctoral thesis
2021
Simulation of Fracture Processes using Global-Local Approach and Virtual Elements. / Aldakheel, Fadi.
Hannover : Leibniz Universität Hannover, 2021. 218 p.Research output: Thesis › Habilitation treatise
Peridynamic Galerkin methods for nonlinear solid mechanics. / Bode, Tobias.
Hannover : Leibniz Universität Hannover, 2021. 161 p.Research output: Thesis › Doctoral thesis
Numerische und experimentelle Untersuchung der Degradation und des Einwachsverhaltens von magnesiumbasiertem Knochenersatzmaterial. / Gartzke, Ann-Kathrin Sigrid Elisabeth.
Garbsen : Institut für Kontinuumsmechanik, Leibniz Universität Hannover, 2021. 126 p.Research output: Thesis › Doctoral thesis
Chemo-mechanical modeling of polymeric hydrogels. / Hajikhani, Aidin.
Garbsen : Institut für Kontinuumsmechanik, Leibniz Universität Hannover, 2021. 131 p.Research output: Thesis › Doctoral thesis
Modelling of Polycrystalline Superalloys. / Munk, Lukas Friedrich David.
Hannover : Leibniz Universität Hannover, 2021. 137 p.Research output: Thesis › Doctoral thesis
Simulation of Joining Zones during Tailored Forming. / Töller, Felix.
Garbsen : Leibniz Universität Hannover, 2021. 119 p.Research output: Thesis › Doctoral thesis
2020
A multiscale DEM-FEM coupled approach for modelling of collision of particle-filled structures. / Chaudry, Mohsin Ali.
Hannover : Institut für Kontinuumsmechanik, Leibniz Universität Hannover, 2020.Research output: Thesis › Doctoral thesis
Particle-based simulation of the selective laser melting process. / Fürstenau, Jan-Philipp.
Hannover : Leibniz Universität Hannover, 2020. 186 p.Research output: Thesis › Doctoral thesis
Meshfree modelling of metal cutting using phenomenological and data-driven material models. / Huang, Dengpeng.
Hannover : Leibniz Universität Hannover, 2020. 129 p.Research output: Thesis › Doctoral thesis
Article
2022
Influence of Moisture Content and Wet Environment on the Fatigue Behaviour of High-Strength Concrete. / Ali, Mohamed Abubakar; Tomann, Christoph; Aldakheel, Fadi et al.
In: MATERIALS, Vol. 15, No. 3, 1025, 28.01.2022.Research output: Contribution to journal › Article › Research › peer review
Effect of pore size on tissue ingrowth and osteoconductivity in biodegradable Mg alloy scaffolds. / Augustin, Julia; Feichtner, Franziska; Waselau, Anja Christina et al.
In: Journal of applied biomaterials & functional materials, Vol. 20, 21.02.2022.Research output: Contribution to journal › Article › Research › peer review
Application of Taylor series combined with the weighted least square method to thermodynamic topology optimization. / Blaszczyk, Mischa; Jantos, Dustin Roman; Junker, Philipp.
In: Computer Methods in Applied Mechanics and Engineering, Vol. 393, 114698, 01.04.2022.Research output: Contribution to journal › Article › Research › peer review
Peridynamic Galerkin method : an attractive alternative to finite elements. / Bode, T.; Weißenfels, C.; Wriggers, P.
In: Computational mechanics, Vol. 70, No. 4, 10.2022, p. 723–743.Research output: Contribution to journal › Article › Research › peer review
A multiscale DEM–FEM coupled approach for the investigation of granules as crash-absorber in ship building. / Chaudry, Mohsin Ali; Woitzik, Christian; Düster, Alexander et al.
In: Computational Particle Mechanics, Vol. 9, No. 1, 02.2022, p. 179-197.Research output: Contribution to journal › Article › Research › peer review
A virtual element method for 3D contact problems with non-conforming meshes. / Cihan, Mertcan; Hudobivnik, Blaž; Korelc, Jože et al.
In: Computer Methods in Applied Mechanics and Engineering, 01.08.2022.Research output: Contribution to journal › Article › Research › peer review
Multilevel Monte Carlo method for topology optimization of flexoelectric composites with uncertain material properties. / Hamdia, Khader; Ghasemi, H; Zhuang, XY et al.
In: Engineering Analysis with Boundary Elements, Vol. 134, 01.01.2022, p. 412-418.Research output: Contribution to journal › Article › Research › peer review
Hyper-Parameter Optimization of Stacked Asymmetric Auto-Encoders for Automatic Personality Traits Perception. / Jalaeian Zaferani, Effat; Teshnehlab, Mohammad; Khodadadian, Amirreza et al.
In: Sensors, Vol. 22, No. 16, 6206, 18.08.2022.Research output: Contribution to journal › Article › Research › peer review
Untersuchung des Potenzials der Topologieoptimierung in der additiven Fertigung am Beispiel von biegebeanspruchten Bauteilen. / Jantos, D. R.; Röttger, A.; Junker, P.
In: Materialwissenschaft und Werkstofftechnik, Vol. 53, No. 10, 05.10.2022, p. 1298-1310.Research output: Contribution to journal › Article › Research › peer review
Efficient and robust numerical treatment of a gradient-enhanced damage model at large deformations. / Junker, Philipp; Riesselmann, Johannes; Balzani, Daniel.
In: International Journal for Numerical Methods in Engineering, Vol. 123, No. 3, 17.02.2022, p. 774-793.Research output: Contribution to journal › Article › Research › peer review
Contribution
2022
Novel Finite Elements : Mixed, Hybrid and Virtual Element Formulations at Finite Strains for 3D Applications. / Schröder, Jörg; Wriggers, Peter; Kraus, Alex et al.
Non-standard Discretisation Methods in Solid Mechanics. ed. / Jörg Schröder; Peter Wriggers. Springer Science and Business Media Deutschland GmbH, 2022. p. 37-67 (Lecture Notes in Applied and Computational Mechanics; Vol. 98).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research
Test of an Idea for Improving the Efficiency of Nonlinear Time History Analyses When Implemented in Seismic Analysis According to NZS 1170.5:2004. / Soroushian, Aram; Wriggers, Peter.
Recent Trends in Wave Mechanics and Vibrations: Proceedings of WMVC 2022. ed. / Zuzana Dimitrovová; Rodrigo Gonçalves; Zuzana Dimitrovová; Paritosh Biswas; Tiago Silva. Springer Science and Business Media B.V., 2023. p. 107-114 (Mechanisms and Machine Science; Vol. 125 MMS).Research output: Chapter in book/report/conference proceeding › Conference contribution › Research › peer review
Virtual Element Methods for Engineering Applications. / Wriggers, Peter; Aldakheel, Fadi; Hudobivnik, Blaž.
The Virtual Element Method and its Applications. Springer Science and Business Media Deutschland GmbH, 2022. p. 557-605 (SEMA SIMAI Springer Series; Vol. 31).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review
2020
Robust contact and friction model for the fatigue estimate of a wire rope in the mooring line of a floating offshore wind turbine. / Bussolati, F.; Guidault, P. A.; Guiton, M. L.E. et al.
Virtual design and validation. Cham : Springer Nature, 2020. p. 249-270 (Lecture Notes in Applied and Computational Mechanics; Vol. 93).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review
Application of Enhanced Peridynamic Correspondence Formulation for Three-Dimensional Simulations at Large Strains. / Hartmann, Philipp; Weißenfels, Christian; Wriggers, Peter.
Lecture Notes in Applied and Computational Mechanics. Cham : Springer Nature, 2020. p. 81-104 (Lecture Notes in Applied and Computational Mechanics; Vol. 93).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review
A Multiscale Projection Method for the Analysis of Fiber Microbuckling in Fiber Reinforced Composites. / Hosseini, S.; Löhnert, Stefan; Wriggers, P. et al.
Virtual Design and Validation. Cham : Springer Nature, 2020. p. 167-184 (Lecture Notes in Applied and Computational Mechanics; Vol. 93).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review
Treatment of brittle fracture in solids with the virtual element method. / Hussein, Ali Musaeed Ali; Wriggers, Peter; Hudobivnik, Blaz et al.
Virtual design and validation. Cham : Springer Nature, 2020. p. 201-228 (Lecture Notes in Applied and Computational Mechanics; Vol. 93).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review
Topology optimization of 1-3 piezoelectric composites. / Nguyen, Thanh Chuong; Zhuang, Xiaoying; Chamoin, Ludovic.
Virtual design and validation. Cham : Springer Nature, 2020. p. 185-198 (Lecture Notes in Applied and Computational Mechanics; Vol. 93).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review
A Concept for the Extension of the Assumed Stress Finite Element Method to Hyperelasticity. / Viebahn, Nils; Schröder, Jörg; Wriggers, Peter.
CISM International Centre for Mechanical Sciences, Courses and Lectures. Cham : Springer Nature, 2020. p. 107-126 (CISM International Centre for Mechanical Sciences, Courses and Lectures; Vol. 597).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review
Discrete Element Methods : Basics and Applications in Engineering. / Wriggers, Peter; Avci, Bircan.
Modeling in Engineering Using Innovative Numerical Methods for Solids and Fluids. Cham : Springer Nature, 2020. p. 1-30 (CISM International Centre for Mechanical Sciences, Courses and Lectures; Vol. 599).Research output: Chapter in book/report/conference proceeding › Contribution to book/anthology › Research › peer review
