Prof. Dr.-Ing. habil. Philipp Junker


30823 Garbsen


-
Academic degrees
2003 - 2008 Study of Mechanical Engineering, Ruhr-Universität Bochum 2008 Diploma, "very good" 2011 PhD, "with distinction" 2016 Habilitation, Venia Legendi for "Mechanics" -
CV
since 2021 Executive Director of the Institute of Continuum Mechanics at Leibniz Universität Hannover
2021 Call to the W3 professorship for Continuum Mechanics at TU Darmstadt (declined) 2019 - 2021 Chief Engineer at the Chair of Continuum Mechanics,
headed by Prof. Balzani2019 Visiting Professor for Engineering Mechanics
at Bergische Universität Wuppertal2017 - 2019 Lecturer for Mechanics 2016 - 2017 Visiting Professor for Continuum Mechanics
at Ruhr University Bochum2015 - 2016 Visiting Professor for Engineering Mechanics
at Bergische Universität Wuppertal2015 Research stay at Caltech, CA, USA 2013 - 2015 Scientific Coordinator of UA Ruhr Graduate Training School SiMiDe,
headed by Prof. Hartmaier2008 - 2015 Scientific Assistant at the Chair of Mechanics of Materials,
headed by Prof. Hackl at Ruhr University BochumSupervision of PhD theses as first referee:
- Prof.'in Dr.-Ing. Johanna Waimann, PhD in the field of "Phase Tranformations"
current position: Senior Engineer at Department von Prof. Reese (RWTH Aachen) - Dr.-Ing. Stephan Schwarz, PhD in the field of "Damage Mechanics"
current position: Teamleiter Simulation bei Böcker Maschinenwerke GmbH, Werne - Dr.-Ing. Dustin R. Jantos, PhD in the field of "Topology and Materials Optimization"
current position: Senior Engineer at Institute of Continuum Mechanics (Leibniz Universität Hannover) - Dr.-Ing. Hendrik Geisler, PhD in the field of "Time-separated stochastic mechanics"
current position: Postdoc at Institute of Continuum Mechanics (Leibniz Universität Hannover)
Second referee for PhD theses:
- Dr.-Ing. Georgios Gaganelis, PhD in the field of "Concrete Structures"
- Dr.-Ing. Hamid El Maanaoui, PhD in the field of "Construction"
- Dr.-Ing. Christoph Kämper, PhD in the field of "Concrete Structures"
- Dr.-Ing. Berend Bode, PhD in the field of "Construction"
- Dr.-Ing. Tatiana Rigoulet, PhD in the field of "Mechanics"
- Dr.-Ing. Ghina Jezdan, PhD in the field of "Mechanics"
- Dr.-Ing. Julian Kink, PhD in the field of "Electric Energy Storage Systems"
- Prof.'in Dr.-Ing. Johanna Waimann, PhD in the field of "Phase Tranformations"
-
Awards and Academic memberships
Awards
- von-Mises-Prize of International Association of Applied Mathematics and Mechanics (GAMM) 2019
for outstanding work on continuum mechanical modelling of complex solids - Winner of Ideenwettbewerb in 2010/2011 of Gründercampus-Ruhr
Memberships
- Member of the Editorial Board of the Journal of Mechanics of Materials and Structures
- Member of Advisory Board of international journal Civil Engineering Design (based on the journal "Bautechnik")
- Member of Policy Committee VDI GPP FA708 Shape Memory Technology - VDI 2205, Section Leader „Simulation"
- Member of Materials Research Department at RUB
- Member of RUB Research School
- Member of ICAMS Advanced Study Group "Continuum Mechanics"
- von-Mises-Prize of International Association of Applied Mathematics and Mechanics (GAMM) 2019
-
Research
-
Industrial Activities
2011 - 2019 Executive Partner of ComMaSIM UG (hb.),
Complex Materials SImulationsExamples for industrial cooperation:
- Development of a material model for the simulation of medical stents
- Topology optimization for racing sports (Formula 1)
- Simulation of construction parts from packaging industry
Formulation of a VDI directive (Association of German Engineers) with various partners:
- Fraunhofer Institutu for Machine Tools and Forming Industry (IWU), Dresden
- Research Community Tools and Materials e.V. (FGW), Remscheid
- Phoenix Contact GmbH & Co. KG, Blomberg
- redsystem GmbH, Munich
- Verein Deutscher Ingenieure (VDI), Düsseldorf
- G. Rau GmbH & Co. KG, Pforzheim
- Center for Mechatronics and Automation Technology (ZeMA), Saarbrücken
-
Teaching
Lectures
- Grundlagen der FE-Technologie, MB Bachelor, BI Master, WS 2012/13, Wahlpflichtfach, Ruhr-Universität Bochum
- Finite-Element-Technology, CompEng Master, SS 2013, Wahlfach, Ruhr-Universität Bochum
- Grundlagen der FEM, MB Bachelor, BI Master, WS 2012/13 - WS 2014/15, Wahlpfichtfach, Ruhr-Universität Bochum
- Mechanische Grundlagen der Strömungsmaschinen, MB Master, WS 2013/15, WS 2017/18, Wahlfach (neu konzipierte Vorlesung), Ruhr-Universität Bochum
- Mechanik A, BI + UTRM Bachelor, WS 2014/15, Pflichtfach, Ruhr-Universität Bochum
- Mechanik B, BI + UTRM Bachelor, SS 2015, Pflichtfach, Ruhr-Universität Bochum
- Mechanik C, MB Bachelor, BI Master, WS 2016/18, (Wahl-)Pflichtfach, Ruhr-Universität Bochum
- Kontinuumsmechanik, MB Bachelor, WS 2016/17, Wahlpflichtfach, Ruhr-Universität Bochum
- Mechanik B, MB + BI + UTRM Bachelor, SS 2017, Pflichtfach, Ruhr-Universität Bochum
- Einführung in die Materialmodellierung, MB Bachelor, SS 2017, Wahlfach, Ruhr-Universität Bochum
- Plastizität und Materialschädigung, MB + BI Master, SS 2018, Wahlfach, Ruhr-Universität Bochum
- Mechnical Modeling of Materials, CompEng Master, WS 2019/20, Ruhr-Universität Bochum
- Einführung in die Materialmodellierung, MB Bachelor, SS 2020, Ruhr-Universität Bochum
- Plastizität und Materialschädigung, MB + BI Master, SS 2020, Ruhr-Universität Bochum
- Technische Mechanik I, MB Bachelor, WS 2015/16, Pflichtfach, Bergische Universität Wuppertal
- Technische Mechanik II, MB Bachelor, SS 2016, Pflichtfach, Bergische Universität Wuppertal
- Technische Mechanik III, MB Bachelor, WS 2015/16, Pflichtfach, Bergische Universität Wuppertal
- Nicht-lineare FEM, MB Master, WS 2015/16, Pflichtfach, Bergische Universität Wuppertal
- Mechanik I, MB Sicherheitstechnik, SS 2016, Pflichtfach, Bergische Universität Wuppertal
- Kontinuumsmechanik, MB Master, SS 2019, Bergische Universität Wuppertal
- Technische Mechanik II, MB Bachelor, SS2019, Bergische Universität Wuppertal
- FEM, MB Bachelor, SS 2019, Bergische Universität Wuppertal
Others
- Supervision of student theses (Diploma, Bachelor, Master)
- Co-supervision of metrological laboratory internship
- MathePraxis project: vibration damping (SS 2012, SS 2013)
- Girl's Day projekt: "Controlling of earthquakes - why some building collapse and others don't"
-
Reviewer Activities
- International Journal of Solids and Structures
- Journal of the Mechanics and Physics of Solids
- Archives of Mechanics
- Computer Methods in Applied Mechanics and Engineering
- Computational Mechanics
- Engineering Optimization
- Damage Mechanics
- Structural and Multidisciplinary Optimization
- Advances in Structural Engineering
- European Journal of Engineering Education
Publications
Showing results 31 - 40 out of 112
2022
In: Archive of applied mechanics, Vol. 92, No. 7, 07.2022, p. 2207-2223.
Research output: Contribution to journal › Article › Research › peer review
2021
In: Computational mechanics, Vol. 67, No. 2, 02.2021, p. 455-480.
Research output: Contribution to journal › Article › Research › peer review
In: Continuum Mechanics and Thermodynamics, Vol. 33, No. 4, 07.2021, p. 1931-1956.
Research output: Contribution to journal › Article › Research › peer review
In: PAMM - Proceedings in Applied Mathematics and Mechanics, Vol. 21, No. 1, e202100075, 14.12.2021.
Research output: Contribution to journal › Conference article › Research › peer review
2021.
Research output: Working paper/Preprint › Preprint
In: Proceedings in applied mathematics and mechanics, Vol. 20, No. 1, e202000076, 25.01.2021.
Research output: Contribution to journal › Article › Research › peer review
In: Continuum Mechanics and Thermodynamics, Vol. 33, No. 1, 01.2021, p. 69-95.
Research output: Contribution to journal › Article › Research › peer review
In: Structural and Multidisciplinary Optimization, Vol. 63, No. 1, 01.2021, p. 95-119.
Research output: Contribution to journal › Article › Research › peer review
2020
In: Structural and Multidisciplinary Optimization, Vol. 61, No. 5, 05.2020, p. 2135-2154.
Research output: Contribution to journal › Article › Research › peer review
In: International Journal for Numerical Methods in Engineering, Vol. 121, No. 14, 08.06.2020, p. 3108-3131.
Research output: Contribution to journal › Article › Research › peer review